WARRANTY INFORMATION 2-YEAR kING CANADA TOOLS LIMITED WARRANTY OFFERS A 2-YEAR LIMITED WARRANTY FOR THIS UNIVERSAL DUST COLLECTION kIT FOR NON-COMMERCIAL USE. PROOF OF PURCHASE Please keep your dated proof of purchase for warranty and servicing purposes. PARTS DIAGRAM & PARTS LISTS Refer to the Parts section of the King Canada web site for the most updated parts diagram and parts list.
Page 3
1. kNOW YOUR TOOL glasses only have impact resistant lenses, thet are NOT safety glasses. Also use a face or dust mask if cutting Read and understand the owners manual and labels affixed to operation is dusty. the tool. Learn its application and limitations as well as its 12.
Page 4
GETTING TO KNOW YOUR UNIVERSAL DUST COLLECTION KIT 1. DUST COLLECTION bOX. Gets installed to the under side of 5. 2-1/2” SIDE MOUNT INLET. Connect one end of the 2-1/2” hose the cast-iron table or MDF table. to this inlet, connect the other end to Fence (Mod. XL-080). 2.
Page 5
ASSEMBLY ASSEMbLY This Universal Dust Collection Kit is designed to fit Excelsior 32” x 24” Cast-iron Table (model XL-075) or Excelsior 32” x 24” MDF Table (model XL-049). For the purposes of this manual, assembly will be shown with the Universal Dust Collection Kit installed to the 32”...
ASSEMBLY & ADJUSTMENTS ASSEMbLY INSTALLING DUST COLLECTION HOSE 1) Install the dust collection hose (A) Fig.4 over the side inlet (B) and secure hose by tightening the hose clamp (C). 2) Install the other end of the collection hose over the dust chute on the rear of the fence dust housing (D).
Need help?
Do you have a question about the XL-130 and is the answer not in the manual?
Questions and answers