Power Supply - Sony 5500 Operation Manual

3 Remote input/output section
1 RS232C connector
2 REMOTE1-IN(9P) connector
3 REMOTE 2 PARALLEL I/O(50P) connector
4 VIDEO CONTROL connector
5 REMOTE1-I/O(9P) connector
REMOTE 2 PARALLEL I/O(50P)
REMOTE 1-IN(9P)
RS232C
ETHERNET
USB
6 USB connector
7 ETHERNET connector
a RS232C connector (RS-232C serial interface)
(D-sub 9-pin)
This is used for manufacturing and services.
b REMOTE 1-IN(9P) connector (D-sub 9-pin,
female)
Use this, with the supplied 9-pin remote control cable, to
connect the unit to another SRW-5000/5500 unit or
another HD VTR unit to carry out editing with a BVE-
series editor BVE-900/910/2000/9000/9100.
c REMOTE 2 PARALLEL I/O(50P) connector (D-
sub 50-pin, female)
Inputs an external remote control signal.
For details, refer to the Maintenance Manual Volume 1.
d VIDEO CONTROL (Digital Video Processor
Control) connector (D-sub 9-pin, female)
Connects to the optional HKDV-900 HD Digital Video
Controller to enable remote control of the internal digital
video processor. Turn off the power before connecting the
remote controller.
e REMOTE 1-I/O(9P) connector (D-sub 9-pin,
female)
Use this, with the supplied 9-pin remote control cable, to
connect the unit to another SRW-5000/5500 unit or
another HD VTR unit to carry out editing with a BVE-
series editor BVE-900/910/2000/9000/9100.
f USB connector
This is used for manufacturing and services.
28
2-2 Connector Panel
REMOTE 1-I/O(9P)
VIDEO CONROL
g ETHERNET connector
Used for monitoring the VTR by SNMP, or for setting or
changing VTR settings by HTTP.
CAUTION
For safety, do not connect the connector for peripheral
device wiring that might have excessive voltage to this
port. Follow the instructions for this port.

4 Power supply

-AC IN connector
-AC IN connector
Connects to an AC outlet using an appropriate power cord.
AC IN