Page 2
This booklet should be used with your Rosie Smart Meter Training Video to train your staff in the proper operation of the Rosie Smart Meter Blood Glucose Monitoring System. Upon completion of training, the trainee will be a certified operator. In order to become certified, the designated trainer should demonstrate the ability to: I.
Page 3
meter will display “ok” and shut off. Performing a control solution test: Insert a new strip into the meter and confirm that the number on the screen matches the code on the vial/pouch of foil wrapped strips. After roughly 3 seconds the number will go away and you will be at the “home screen”...
Page 4
To ensure that the meter is working properly, insert the check strip into the meter the same was as you would insert a test strip with the side that says “check” facing up. “OK” should display on the screen within 10 seconds. When you eject the check strip the meter will automatically turn off.
Page 5
Cleaning and Disinfection Cleaning Procedure 1. Place device and wipes on a smooth surface. Be sure there is enough light. 2. Wash hand with soap and warm water then pat dry. 3. Put on a protective glove. 4. Take a piece of germicidal wipe out of canister/ 5.
Page 6
5. Store disinfectants out of the reach of children. 6. If any signs of deterioration are noted, stop using the meter and please contact Nurse Rosie customer service at 800.841.1109 Monday-Friday 8:30am- 4:30pm. 7. If you witness cloudy display, material cracking, brittle, softening or meter buttons, malfunction, then performance of meter has changed (i.e.
Need help?
Do you have a question about the Rosie SmartMeter and is the answer not in the manual?
Questions and answers