Techline Cv Technical Data Applications, Specifications And Features/Benefits - Netafim Techline CV Design Manual

N E T A F I M T E C H L I N E
TECHNICAL
DATA
22
Techline CV
Dripperline
APPLICATIONS:
• Subsurface or on-surface installations
• Slopes
• Curved, angular or narrow areas
• High traffic/high liability areas
• Areas subject to vandalism
• High wind areas
• Turf, shrubs, trees, flowers
• At-grade windows
• Sports turf
• Tennis courts
FEATURES/BENEFITS:
• Each Dripper has a built-in, 2 psi Check Valve:
- All drippers turn on and off at the same time
- Minimizes water loss
- Holds back up to 4 feet of water
1 /
2
- No low drainage; great on slopes
- More precise watering - Entire lateral begins operating at the same time
• Built-in Physical Root Barrier: Drippers are protected from root intrusion without chemical reliance
• Dark Brown Color: Visually identifies Techline CV, better blending into surrounding colors of the
landscape
• Pressure Compensation: All drippers deliver equal flow across the length of the lateral
• Unique Flow Path: Turbonet technology allows for better control of water flow and less chance of
clogging
• Single hole dripper outlet from tubing:
- Better protection against intrusion
- Allows the dripperline to be used in subsurface applications without chemical protection
• Water is captured from the center of the tubing, ensuring that only the cleanest water is used
• No Air/Vacuum Relief Valve is required: Installations are faster and less expensive
• No Automatic Line Flushing Valve is required: Because the dripperline is designed to hold water in
the tubing after shut-down, a manual flush may be used (TLSOV or TLFIG8)
• Techline Compatible: Same ID/OD as Techline, works with all Techline fittings and no pipe clamps
are needed under 50 psi
• Installations are faster and less expensive
• Techfilter Compatible: Provides a limited lifetime warranty against root intrusion
C V D E S I G N G U I D E
®
SPECIFICATIONS:
• Dripper Flow Rates (GPH): 0.26, 0.4, 0.6, 0.9
• Dripper Spacings:, 12", 18", 24" (24" is available in 0.6
& 0.9 GPH flow rates)
• Pressure Compensation Range: 14.7 to 70 psi
• Maximum System Pressure: 50 psi
• Tubing Diameter: 0.66" O.D., 0.56" I.D.
• Coil Lengths: 100', 250', 1,000'