Summary of Contents for Doulton Uno Filter Select Tap
Page 1
J. ½” Male Stem Adaptor Q. Plastic Washer P. Lock Washer K. 7/16” Tap Adaptor R. Locking Nut Parts included in your Uno Filter Select Tap filtration system Filter Housing Comprising: Fitting Kit: Pillar Tap Comprising: Filter Head 3/8” Tubing Pillar Tap Mounting Screws x3 3/8”...
Mains cold minimum of 18mm (0.75”) to ensure a good seal Adaptor Kitchen tap Tap adaptor T adaptor Non return valve Adaptor Mains cold Filter housing Existing hot water supply water supply Existing hot Mains cold 100mm (4”) www.doulton.com...
Page 3
Existing • Remove the ceramic filter (E) by unscrewing from the filter cap (C) and place to one side ensuring that the open ended plastic mount is kept clean Mains cold to avoid contamination www.doulton.com...
Page 4
12.3 Apply a gentle even pressure with the pad and slowly work down the length of the ceramic filter once. Ensure that the cleaning is uniform over the whole filter www.doulton.com...
Page 5
Please retain your receipt as proof of purchase. To register your product warranty please visit www.doulton. com/product-registration/ and complete the Product Registration Form.
Need help?
Do you have a question about the Uno Filter Select Tap and is the answer not in the manual?
Questions and answers