Orbit HOSE END WATERING FLOWERBED AND SHRUB KIT Instruction Manual

This kit contains:
¼" FITTINGS
(10) (10)
End Plug Coupling
½" FITTINGS AND ACCESSORIES
(1) (2)
Punch Tool Figure 8
End
Step 1
ATTACH TO HOSE FAUCET
Attach ½" tubing to the pressure reducing tubing adapter.
Push tubing firmly into the
fitting, ensuring the metal
teeth (inside the fitting) are
fully grasping the tubing.
Step 2
LAYOUT TUBING
∙ Uncoil ½" tubing, running it next to your
trees and shrubs.
Tip: Lay the tubing in the sun prior to
installation to help it uncoil.
∙ Cut tubing when you reach the last plant.
∙ Use the ½" tubing stakes to hold
tubing in place.
Step 3
FLUSH TUBING AND ATTACH END FITTING
∙ Turn on water to flush debris from the tubing.
∙ Use the ½" Figure 8 End Fitting to end the ½" tubing line.
Step 4
ATTACH SPRINKLERS
∙ With the punch tool punch a small hole in one side of ½" tubing.
∙ Press a ¼" coupling into the hole created by the punch tool until
connection is tight and secure.
Note: The punch tool handle can be used
to insert a coupling into the distribution
tubing. Place the coupling in the hole on
the blunt end of the tool, and push the
exposed end into the distribution tubing.
LAYOUT EXAMPLES
For more information, please visit
our website www.orbitonline.com
or call us at 1-800-488-6156
HOSE END WATERING FLOWERBED AND SHRUB KIT
INSTRUCTION MANUAL
(2)
Tee
(1) (10)
Coupling Tubing Stake
∙ Use the included ½" tee if you need to
branch tubing in two directions.
∙ Use the included ½" coupling if you need
to connect two pieces of ½" tubing.
For cold water outdoor irrigation use only.
Keep from freezing.
(1)
Tee
Attach pressure reducer assembly to hose or hose faucet.
∙ Attach ¼" tubing to the end of the coupling and run the tubing to your
tree or shrub and cut.
∙ Attach the barbed end of the adjustable bubbler to the end of the ¼"
tubing and place spike next to the plant.
∙ Adjust water flow by turning the bubbler head
∙ Use ¼" End Plug to plug a hole in ½" tubing or to end a ¼" tubing line.
Note: Insert a ¼" tee to use multiple sprinklers in
one area. Use of multiple sprinklers is ideal for trees
and plants that need additional watering.
(8)
Adjustable Bubblers Pressure Reducing
on Spike Tubing Adapter
(1)
(50') ½" Tubing (50') ¼" Tubing
(1)
(1)
PN 56315-24 rA