SABAF 46 Technical Characteristics Instructions For Use, Assembly Instructions, Maintenance Instructions

SABAF 46 Technical Characteristics Instructions For Use, Assembly Instructions, Maintenance Instructions

Manually operated gas valve with flame surveillance device

Advertisement

SABAF S.p.A.
Via dei Carpini, 1
25035 Ospitaletto (Brescia) Italia

TECHNICAL CHARACTERISTICS

Instructions For Use, ASSEMBLY INSTRUCTIONS,
MODEL 46 – 46R – 46M
MANUALLY OPERATED GAS VALVE WITH FLAME
SURVEILLANCE DEVICE
ANSI Z21.78 – CSA 6.2
46 – 46R – 46M (1091812)
models
Model 46 – 46R – 46M
Revision 03 – lug 17
page 1 of 6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 46 and is the answer not in the manual?

Questions and answers

Summary of Contents for SABAF 46

  • Page 1 Via dei Carpini, 1 25035 Ospitaletto (Brescia) Italia TECHNICAL CHARACTERISTICS INSTRUCTIONS FOR USE, ASSEMBLY INSTRUCTIONS, MAINTENANCE INSTRUCTIONS MODEL 46 – 46R – 46M MANUALLY OPERATED GAS VALVE WITH FLAME SURVEILLANCE DEVICE ANSI Z21.78 – CSA 6.2 46 – 46R – 46M (1091812) models Model 46 –...
  • Page 2 If a different type of gas is used, the amount of reduced flow can be adjusted by turning the by-pass with a screwdriver. TABLE 1 - MICROSWITCH CHARACTERISTICS Nominal tension 250 V Method for operation push-button Max. operating temperature 125 °C Model 46 – 46R – 46M Revision 03 – lug 17 page 2 of 6...
  • Page 3 The non-observance of this prescription can compromise the correct working and the safety of the product. Model 46 – 46R – 46M Revision 03 – lug 17 page 3 of 6...
  • Page 4 9.525 mm compression fitting injector injector tube diameter 7 mm compression fitting tube diameter 6 mm compression fitting M 16 x 1.25 flared tube Model 46 – 46R – 46M Revision 03 – lug 17 page 4 of 6...
  • Page 5 25035 Ospitaletto (Brescia) Italia Max. torque values: maximum torque value Component lbf.in Nut + (olive) + tube for outlet of valves Screws for fixing brackets Injectors Model 46 – 46R – 46M Revision 03 – lug 17 page 5 of 6...
  • Page 6 Alternatively, on the component can be marked a four digit code indicating the week (first two digits) and the year of production (last two digits). EXAMPLE: A COMPONENT PRODUCED THE 14 WEEK OF 2004 IS MARKED 1404 Model 46 – 46R – 46M Revision 03 – lug 17 page 6 of 6...

This manual is also suitable for:

46m46r

Table of Contents