Placing Scent Cartridge; Placing Black Plug - Sense XS Manual

Plug Connect

Placing Scent Cartridge

- Remove the black metal cap from the scent system.
- Remove the red cartridge caps from the scent
cartridge(see "what's in the box", page 3).
- Place the scent cartridge(8) into the scent system(1).
The projecting part of the scentcartridge goes into
the system's gap in the transparent.
- Replace the black metal cap on top of the scent
system.

Placing Black Plug

- Put the black plug(4) through the metal cap's gap
on top of the scent system. The broader end of the
black plug goes into the scent cartridge. The narrow
end of the black plug sticks slightly out above the
black metal cap(2).
- Slightly push the black plug downward for
reinforcement.
Smile
1. Scent system
2. Black metal cap
4. Black plug
8. Cartridge
4
2
8
1
7