Primos The CLUB XL 65101 Quick Start Manual

FIGURE 1
FIGURE 2
FIGURE 3
The CLUB
Models:
Shown using Brush Deception
For Replacement Parts Visit us online at: www.primos.com

BLIND SET UP INSTRUCTIONS

The CLUB
™
Model No. 65100
The CLUB XXL
™
WARNING: Read all instructions and safety warnings and
follow them thoroughly. Failure to follow these instructions
may result in serious injury or death!
STEP 1: Remove your blind from the carry bag and unclip the
tie strap. (fig. 1)
STEP 2: Spread the corners of the blind out (fig. 2) and flip it
open so you see the center hub on the top of the blind.
STEP 3: Firmly pull the cord attached to the center hub until
the top pops out. (fig. 3)
STEP 4: Lift the top of the blind so you have access to the
center hub on one of the walls and firmly pull the hub
until the wall pops out. (fig. 3 & 3a)
STEP 5: Continue around the blind, pulling the hubs one at a
time until all of the walls are set up.
Your blind should now be standing square.
STEP 6: Use stakes to secure your blind to the ground.
(fig. 4)
STEP 7: Adjust the windows to your liking. Add native brush
to your blind to optimize your camouflage. (fig. 4)
FIGURE 3a
FIGURE 4
, The CLUB XL & The CLUB
™ ™
loops for added concealment.
™
, The CLUB XL
™
Model No. 65102
XXL
™
Model No. 65101,
Detail of center hub ring from
the outside of the blind.
Pulling on the center hub
cord will expand blind top
and walls.