Advertisement
dIreCTIONs
divide the face into 6 sections as shown in
the picture. when starting treatment, you
should first use the mode for your skin type.
lOW FreQueNCy
(oRAnge led)
or
hIGh FreQueNCy
(Red led)
(You will not see the pulsating on this setting)
starting at section a, move the wand slowly over
that area for two minutes. Press lightly, only firmly
enough to keep the face of the baby quasar against the
skin. try not to let light escape as only the light penetrating
will have a therapeutic benefit. a soft tone will sound
signaling you to move to the next area.
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
12
sensitive skin,
Normal skin
next move clockwise to section
b. slowly move the wand over
that area for two minutes.
Moving in a clockwise direction,
treat each section c, d, e, f.
after treating all six sections,
continue by repeating the treatment
a second time using the continuous
wave (green led) or high frequency
(red led).
if you have special areas of concern,
use the light for another two minutes
in those areas on the continuous
wave (green led) strength setting.
13
Advertisement
