™ USED OIL STORAGE SYSTEMS Model No. AGS-180D AGS-245D AGS-285D AGS-500D Owner’s Manual AGS-285D AGS-245D REV 7/01...
Page 2
Assembly Instructions Please read the following before proceeding with installation and operation of the JohnDow Used Oil Storage System. Installation: 1. Position the tank in a location that is within 2” of level. 2. Attach the 10’ x 3/4” intake hose to the pump. 3.
Operating Instructions Automatic Overfill Protection The JohnDow Used Oil Storage System is equipped with an automatic air shut-off valve that stops the air supply to the pump to prevent over- filling and overflowing the tank. The air valve will engage when the tank is at approximately 85% of capacity.
Page 4
For Service Assistance Phone Toll Free 1-800-433-0708 JohnDow Industries, Inc. 151 Snyder Ave. Barberton, OH. 44203...