Connecting To The Forticontroller-5103B Web-Based Manager (Gui); Connecting To The Forticontroller-5103B Command Line Interface (Cli) - Fortinet FortiController-5103B Session-Aware Load Balancer Manual

Connecting to the FortiController-5103B Web-based manager (GUI)

Connecting to the FortiController-5103B Web-based manager
(GUI)
Connecting to the FortiController-5103B command line interface
(CLI)
24
Figure 5: Example session-aware load balanced cluster
Internal network
You can connect to the FortiController-5103B web-based manager by browsing to the
FortiController-5103B mgmt interface IP address. From the FortiController-5103B
web-based manager you can add workers to the cluster and configure load balancing
settings.
By default, you can connect to the FortiController-5103B web-based manager by
connecting the mgmt interface to your network and browsing to https://192.168.1.99.
You can connect to the FortiController-5103B CLI using the serial cable that came
packaged with your FortiController-5103B board or an Ethernet connection to the mgmt
interface.
Load Balanced Traffic
on Fabric Backplane
Single
FortiController
Slot 1
fctrl/f1
fctrl /f3
Management
(mgmt)
Management and
Control Traffic on
Base Backplane
FortiController-5103B Session-Aware Load Balancer Guide
Basic Configuration
FortiGate
Worker Boards
Slots 3 to 14
10-500-161552-20140822
http://docs.fortinet.com/