Table of Contents
Advertisement
Quick Links
TRUBLUE
SPEED
AUTO BELAY
Operator Manual
Model: TBSD150-20
NOTE TO INSTALLERS
Always Read Instructions Before Use
Leave this Operator Manual attached to the auto belay.
The Operator Manual contains information relating to the
safe use of the TRUBLUE Speed Auto Belay and includes all
product registration and warranty information. This docu-
ment may only be removed by the end user. Ensure that this
Operator Manual is readily available to operators at all times
Head Rush Technologies TRUBLUE Speed Operator Manual
P/N 11764-04
Head Rush Technologies products are covered by a number of patents, including
U.S. Patents 8,490,751; 8,851,235; 9,016,435; 8,851,235 and D654,412
& corresponding patents/applications in the USA and in other countries worldwide.
Advertisement
Table of Contents
Related Manuals for head rush technologies TBSD150-20
Summary of Contents for head rush technologies TBSD150-20
- Page 1 Head Rush Technologies TRUBLUE Speed Operator Manual P/N 11764-04 Head Rush Technologies products are covered by a number of patents, including U.S. Patents 8,490,751; 8,851,235; 9,016,435; 8,851,235 and D654,412 & corresponding patents/applications in the USA and in other countries worldwide.
- Page 3 If items external to the device have been removed, and retraction problems persist, immediately send the device to your nearest authorized Head Rush Technologies service center. Examples of external items that could prevent or affect retraction of a TRUBLUE Speed device: ƒ...
-
Page 4: Table Of Contents
TABLE OF CONTENTS SAFETY INFORMATION 1.1 Health and Safety 1.2 Symbols Used in this Manual WARRANTY CONDITIONS 2.1 Customer Responsibility CERTIFICATION 3.1 Standards DESCRIPTION SPECIFICATIONS AUTO BELAY PARTS 6.1 Label 6.2 Location of Labels 6.3 Icon Descriptions UNPACKING 7.1 Precautions 7.2 Receipt of the Auto Belay 7.3 Unpacking the Auto Belay 7.4 Storage... - Page 5 10.0 INSPECTION & MAINTENANCE 10.1 Annual Recertification 10.2 Scheduled Maintenance 10.2.3 Safety Precautions 10.3 Daily Inspection 10.4 Weekly Inspection 10.4.1 Inspection Procedure 10.4.2 Webbing Wear 10.5 Six Month Inspection 10.5.1 Inspection Procedure 10.5.2 Webbing Inspection 10.6 Nozzle Replacement 10.7 Webbing Line Replacement 10.7.1 Safety Precautions 10.7.2 Webbing Line Replacement Procedure 10.8 Replacement Parts...
-
Page 6: Safety Information
TRUBLUE Speed Auto Belay may result in death and/or serious injury. TRUBLUE Speed Auto Belay Model TBSD150-20 12.5 meter and 16 meter and associated equipment are designed and specified for use in the recreational climbing industry as a controlled descent device. -
Page 7: Symbols Used In This Manual
Symbols Used in this Manual The following safety symbols are used throughout this manual to highlight po- tential dangers. One or more precautions may be associated with practices and procedures described within this manual. Failure to adhere to any precautions highlighted can result in death, serious injury, or equipment damage. -
Page 8: Warranty Conditions
No person, agent or Distributor is authorized to give any warranty, other than the one herein expressed, on behalf of Head Rush Technologies, or to as- sume for it any liability pertaining to such products. Head Rush Technologies expressly disclaims any implied guarantee of merchantability, or claim as to whether the device is suited for a particular purpose. - Page 9 ƒ Normal deterioration due to use and exposure. ƒ The installer and operator must fully understand these instructions. Any questions must be submitted in writing to Head Rush Technologies. Adherence to the Operator Manual, manufacturer’s instructions, and advice given by authorized Head Rush service technicians is the responsibility of the buyer, installer, and operator.
-
Page 10: Certification
3.0 CERTIFICATION Standards NOTE If the TRUBLUE Speed Auto Belay is resold outside of the country of desti- nation, the reseller must provide instructions for use, service, maintenance and repair in the language of the country of use. The TRUBLUE Speed Auto Belay can be used as a climbing/descent system device only in combination with other components (harness, mounting hard- ware, etc.). -
Page 11: Description
4.0 DESCRIPTION The TRUBLUE Speed Auto Belay is a controlled descent device designed specifically for use in the climbing industry. The TRUBLUE offers a maximum descent height of 12.5 m (41 ft) or 16 m (52.5 ft) based on webbing length selected for your device. -
Page 12: Specifications
5.0 SPECIFICATIONS MODELS TRUBLUE Speed: TBSD150-20 IN ACCORDANCE WITH EN 341:2011-1A AND CERTIFICATION EN 360:2002 DIMENSIONS 380 x 320 x 216 mm (15 x 12.6 x 8.5 in) NET WEIGHT 19.75 kg (44 lbs) MATERIALS CASING Aluminum Alloy INTERNAL PARTS Zinc plated steel... -
Page 13: Auto Belay Parts
COVER (FRONT) WEBBING LINE NOZZLE WEBBING HANDLE *not to scale* CARABINER Label TBSD150-20 SN## # ### # Model number Unit serial number 0123 IN ACCORDANCE WITH EN 341:2011-1A AND EN 360:2002 Notified body EN standard and for CE type device classification examination www.headrushtech.com | +1-720-565-6885... -
Page 14: Location Of Labels
Location of Labels SPECIFICATION LABEL INFORMATION LABEL SERIAL NUMBER LABEL MODEL: TBSD150-20 ALWAYS READ AND FOLLOW THE WARNINGS AND RATED BODY WEIGHT: INSTRUCTIONS FOR USE 10 to 136kg (22 to 300lbs) DEVICE WEIGHT: 18.5 kg (41 lbs MOUNTING HEIGHT*: 12.5 m black webbing end: Max. 12.5 m (41.0 ft) -
Page 15: Icon Descriptions
Icon Descriptions Device Weight Only one user at a time Body Weight Harness standards EN 12277, UIAA 105, EN 361 Do not alter the line. Do Descent Rate not clamp, knot or tie on additional line Do not store the line Country of Manufacture inside the device wet Never install the device... - Page 16 Check descent path is clear, Always land with Inspect the Webbing slightly bent knees to absorb landing Do not let TBSD150-20 (The TRUBLUE Speed Serial number only) retract uncon- trolled EN 362/EN 12275 Minimum connector...
-
Page 17: Unpacking
The TRUBLUE Speed Auto Belay is packaged in a recycled cardboard box and contains: ƒ 1 x TRUBLUE Speed Auto Belay Model TBSD150-20 ƒ 1 x 12.5 m (41 ft) or 1 x 16 m (52.5 ft) Webbing Lower Line ƒ... -
Page 18: Storage
3. Check the Certification Label for the ‘Next Recertification Required’ date. If the date shown has passed or the label is missing or illegible, the Auto Belay must not be put into service. 4. Register your Auto Belay online at headrushtech.com/register. PRODUCT REGISTRATION MUST BE COMPLETED Product Registration is critical for receiving product notifications, re- certification notices, and up-to-date information for the safe use of the... -
Page 19: Installation
8.0 INSTALLATION Precautions ALWAYS USE DESIGNATED MOUNTING POINTS Never install the Auto Belay using any part of the device apart from the designated mounting points. Incorrect mounting can result in serious injury or death. ALWAYS USE THE CORRECT MOUNTING HEIGHT Failure to install the device at the correct mounting height could result in damage to the device or loss in device performance. -
Page 20: Anchor Points
All anchor points and connectors used with a TRUBLUE Speed Auto Belay must conform to any federal or state requirements for such devices. Head Rush Technologies requires anchor points to have a minimum load ca- pacity of 10 kN (2200 lbs) in expected directions of application. Other national and international standards for anchor points may apply and require higher load capacity. -
Page 21: Selecting A Location
8.2.4 SELECTING A LOCATION The TRUBLUE Speed Auto Belay is to be mounted at the top of the climbing route with the nozzle and webbing line pointed down. When selecting a location to mount the Auto Belay, always check: ƒ The Auto Belay will hang vertically over the climbing route with the noz- zle pointing down. -
Page 22: Mounting
Mounting With a suitable location for the Auto Belay selected, it can be mounted only using the methods and hardware de- scribed in this manual. When mounting the Auto Belay be aware of the following Front Side Cover precautions: with Bump Out *face away from ƒ... -
Page 23: Orientation
Ensure mounting hardware is secure and the unit is free to pivot in all directions. Other mounting options are available. Contact Head Rush Technologies for more information. 8.3.2... -
Page 24: Operation
9.0 OPERATION Owners and purchasers of the TRUBLUE Speed Auto Belay are responsible for the safety and supervision of any person using this equipment and are required by the manufacturer to read, understand and follow all instructions in this Operator Manual regarding the correct installation and operation of the Auto Belay prior to any use. -
Page 25: Operator Training
Speed device back into service. If items external to the device have been removed, and retraction problems persist, immediately send the device to your nearest authorized Head Rush Technologies service center. Examples of external items that could prevent or affect retraction of a TRUBLUE Speed device: ƒ... - Page 26 WARNING Climbing is considered a strenuous activity. If you have any physical or medical conditions that may affect your climbing ability consult a medical professional prior to participation. POTENTIAL FOR PARTICIPANT ENTANGLEMENT Potential for participant entanglement exists during descent. Ensure all loose items that may become tangled are tightened or removed before using the Auto Belay.
-
Page 27: Climbing Harness
Climbing Harness USE AN APPROVED HARNESS Always use a climbing harnesses complying with the standards specified in this manual. Ensure the harness is appropriate for use, in a serviceable condition and correctly fitted. Always follow the harness manufacturer’s instructions for fit, care and use. Carabiner Use On some models, a triple locking self closing carabiner is supplied as an inte- gral part of the descent line. -
Page 28: Secondary Connections
9.4.2 SECONDARY CONNECTIONS Based on the site risk analysis, a secondary connector may be recommended to be used with an Auto Belay. Head Rush Technologies offers several options for secondary connectors, or continuous connection systems. www.headrushtech.com | +1-720-565-6885... -
Page 29: Inspection & Maintenance
The TRUBLUE Speed Auto Belay requires an annual service and recertification inspection to be carried out by an authorized Head Rush Technologies service agent. The Certification expiration date is shown on the Certification Label located on the side of the front casing. -
Page 30: Safety Precautions
NO UNAUTHORIZED SERVICING Do not attempt to carry out any maintenance, repair or service actions not detailed in the User Manual. Any unauthorized maintenance, repair or modifications to the Auto Belay will compromise safety, render the unit not fit for use, and void the war- ranty provisions. -
Page 31: Inspection Procedure
10.4.1 INSPECTION PROCEDURE Ensure adequate lighting and unrestricted access is available to permit a thor- ough inspection of all areas of the Auto Belay. This inspection should be com- pleted either with the Auto Belay dismounted or by climbing to the location of the Auto Belay and anchoring in, so you may visually inspect the unit and the entire length of webbing. -
Page 32: Webbing Wear
8. Complete and file ‘Weekly Inspection Log’ documentation. 9. Return Auto Belay device to service. 10.4.2 WEBBING WEAR INSPECT WEBBING DAILY Webbing in your TRUBLUE must be evaluated on a daily basis. A detailed description of when a webbing should be taken out of service is included in the Wear Tables below. - Page 33 WEAR TABLES Webbing pictures outlined in in the tables below show webbing that MUST be taken out of service and replaced immediately to continue using your TRUBLUE. green outlined photos show webbing that can be kept in operation. TRUBLUE 16 m Degree of Wear Edge Wear Face Wear...
- Page 34 TROUBLESHOOTING WEBBING WEAR Symptoms Potential Causes Potential Solutions Climbers are excessively Mark out auto belay boundaries so climbers swinging as they descend do not pendulum greatly as they descend. Stainless steel nozzle Inspect nozzle insert for burrs and other insert is damaged damage.
-
Page 35: Six Month Inspection
10.5 Six Month Inspection The TRUBLUE Speed Auto Belay requires an in depth six (6) month inspection by the Operator to maintain its safe and efficient operation. For the six month inspections the unit must be dismounted and removed to a sturdy work table. 10.5.1 INSPECTION PROCEDURE 1. -
Page 36: Nozzle Replacement
3. Inspect the webbing joining shackle. Ensuring that: ƒ The shackle pin is secure and straight – do not attempt to tighten or loosen. NOTE The shackle pin is secured with thread locking compound and any attempt to turn will compromise its security. ƒ... - Page 37 ALWAYS REPLACE NOZZLE AS A PAIR If nozzle requires replacement, always replace as a matched pair – do not mix worn and new nozzle pieces. To remove the nozzle assembly: Assembled nozzle Remove alignment pin Lift and remove the two halves.
-
Page 38: Webbing Line Replacement
10.7 Webbing Line Replacement If the lower webbing line shows signs of wear, damage or contamination then it will need to be replaced. The short webbing loop inside the device does not receive wear under normal operation and is not inspectable by the operator. Replace Line as follows: 10.7.1 SAFETY PRECAUTIONS... - Page 39 DRUM LEAD WEBBING LINE WEBBING JOINING SHACKLE Webbing joining link parts 5. Unscrew the shackle pin. 6. Remove webbing line and complete shackle assembly from the drum lead. 7. Fit new shackle supplied with the line – Ensure the loop part of the shackle is fitted to the drum lead.
-
Page 40: Replacement Parts
Your TRUBLUE Speed Auto Belay is fitted with a number of user replaceable parts that may be refitted without the need to return the device to an autho- rized Head Rush Technologies Service Center. Always follow the Manufac- turer’s instructions as detailed in this User Manual and any Part Replacement Guide supplied when undertaking replacement of a part. -
Page 41: Troubleshooting
Head Rush Technologies Distributor or Service Center, or online at https://store.headrushtech.com. When shipping the unit back to an authorized Head Rush Technologies Service Center, place it in the box with the front cov- er with bump facing UP and the white foam facing UP. You will be responsible for the cost of any damage and necessary repairs due to shipping your auto belay in unauthorized packaging. -
Page 42: Manufacturer's Details
11.0 MANUFACTURER’S DETAILS For Recertification or unscheduled service or repairs, return your TRUBLUE Speed Auto Belay to your nearest Head Rush Technologies Authorized Service Center or to the Manufacturer at the address shown below. ADDRESS CONTACT DETAILS Head Rush Technologies... - Page 44 REGISTER YOUR DEVICE Get automatic updates on recertification and product information – visit headrushtech.com/register ANNUAL RECERTIFICATION IS REQUIRED Please keep the shipping box for your device. For instructions on annual recertification, visit headrushtech.com/recertification +1-720-565-6885 www.headrushtech.com info@headrushtech.com March 2019...
Need help?
Do you have a question about the TBSD150-20 and is the answer not in the manual?
Questions and answers