Exhibitor’s reference. The program flow is summarized by the flow chart below. Figure 2 Exhibitor Module Flow Chart ACR122U NFC Reader Visitor Management System Manual Page 3 of 10 Version 1.1...
3.1 Registration Module 1. In the main menu click on the Registration button. 2. The Registration Module will open. Place the card on top of the reader. ACR122U NFC Reader Visitor Management System Manual Page 4 of 10 Version 1.1 October 2008...
Page 5
The application will automatically create the database. 5. A pop up window will appear once the data successfully saved contactless card and the database. ACR122U NFC Reader Visitor Management System Manual Page 5 of 10 Version 1.1 October 2008...
Page 6
6. There are other options that can be used in the Registration Module under the File Menu. 7. If you have several ACR122U NFC Readers connected to your computer, this option will allow you to choose which device you want to use.
12. The Exit Option closes the application. 3.2 Exhibitor Module 1. In the main menu click on the Exhibitor button. ACR122U NFC Reader Visitor Management System Manual Page 7 of 10 Version 1.1 October 2008...
Page 8
The application will automatically create the database. 4. You will see the information stored in the card. This data is saved in an excel file. ACR122U NFC Reader Visitor Management System Manual Page 8 of 10 Version 1.1 October 2008...
Page 9
Exhibitor’s booth. 8. Under the File Menu, you can also click on the Preference button which will open the Registration Settings Window. ACR122U NFC Reader Visitor Management System Manual Page 9 of 10 Version 1.1 October 2008...
Page 10
11. As the name of the Switch Module implies, it allows you to switch between the two modules of the application. 12. The Exit Option closes the application. ACR122U NFC Reader Visitor Management System Manual Page 10 of 10 Version 1.1 October 2008...
Need help?
Do you have a question about the ACR122U and is the answer not in the manual?
Questions and answers