Summary of Contents for dBTechnologies FlexSys FMX12
Page 1
Las advertencias del presente manual se deben tener en cuenta conjuntamente con las del “MANUAL DEL USUARIO” - Sección 2”. A.E.B. Industriale Srl Via Brodolini, 8 Località Crespellano 40053 VALSAMOGGIA BOLOGNA (ITALIA) Tel +39 051 969870 Fax +39 051 969725 www.dbtechnologies.com info@dbtechnologies-aeb.com FMX 12 Rev 1.2 cod. 420120315Q...
Page 2
Thank you for choosing a dBTechnologies Product! The FMX 12 is a versatile coaxial active stage monitor. It is equipped with one 1” compression driver (1.3” voice coil), and one 12” woofer (2” voice coil). The coverage pattern is 60° (H) x 90° (V), (the horn is rotatable) and the mechanical design allows also the vertical usage (36 mm diameter pole mount hole).
Page 3
3) Connections and controls a) Connect the audio input (1). In case of a microphone, plug it and select “Mic” in the Input sensitivity switch (6). In the other cases check that the switch is set on “Line”. Adjust the level of Sensitivity (2).
Page 4
If you use the loudspeakers outdoor avoid spots exposed to bad weather conditions. Contact dB Technologies for accessories to be used with speakers. dBTechnologies will not accept any responsibility for damages caused by inappropriate accessories or additional devices.
Need help?
Do you have a question about the FlexSys FMX12 and is the answer not in the manual?
Questions and answers