Removal Of The Battery - Magic MGC LSH 3 R Operating Instructions Manual

Fax +32 2 359 95 50
•
To clean the shaver head, once it is mounted on the appliance, it must be disassembled.
To do so, press the release button and lift upward simultaneously. You can now clean the
blade with the cleaning brush provided. Also use the brush to clean the inside of the
head by taking the razor blade from the head. After cleaning, do not forget to replace
the complete head on the appliance.
STORAGE
Do not wind the power cord around the appliance. Always untwist the power cord before and
after use. Store the appliance and all its accessories in the travelling pouch in order to have all
accessories at your disposal when you need them.

REMOVAL OF THE BATTERY

When you decide to throw away your appliance, first remove the battery to protect the
environment.
•
The appliance must be unplugged when you remove the battery.
•
Remove the head.
•
Hold the appliance with one hand with the head part upwards, and make one of the
sides slide (downwards) with your other hand. Proceed in the same way for the other
side.
•
Open the appliance by removing the part before the back part.
•
Take out the battery and throw it away according to regulations.
PROTECTION OF THE ENVIRONMENT– DIRECTIVE 2002/96/EC
In order to preserve our environment and protect human health, the waste electrical and
electronic equipment should be disposed of in accordance with specific rules with the
implication of both suppliers and users. For this reason, as indicated by the symbol
rating label or on the packaging, your appliance should not be disposed of as unsorted
municipal waste. The user has the right to bring it to a municipal collection point performing
waste recovery by means of reuse, recycling or use for other applications in accordance with
the directive.
Copies of the I/B. Please reproduce them without any
changes except under
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
11
Assembly page 11/32
special instruction from Team
on the
MGC LSH 3 R - 080308