RCm Kapton EB10 Manual

1/10 scale 4wd electric off-road buggy

Advertisement

1/10 Scale 4WD Electric off-road buggy
Manual
S pe c ific a t io n s
S pe c ific a t io n s
S pe c ific a t io n s
B - 10E
B - 10E
B - 10E
Specifications
B-10E
Length:
Length:
Length:
Length:
417mm
4 1 7 m m
4 1 7 m m
4 1 7 m m
Width:
Width:
Width:
Width:
250/252mm
2 5 0 / 2 5 2 m m
2 5 0 / 2 5 2 m m
2 5 0 / 2 5 2 m m
Dimensiones: 417mm x 250/252mm x 151mm
Height:
Height:
Height:
Height:
151mm
1 5 1 m m
1 5 1 m m
1 5 1 m m
Distancia entre ejes: 290mm
Wheel Base:
Wheel Base:
Wheel Base:
Wheel Base:
290mm
2 9 0 m m
2 9 0 m m
2 9 0 m m
Ruedas (D/T): ø 87x34mm / ø 87x39mm
Gear Ratio:
Gear Ratio:
Gear Ratio:
Gear Ratio:
9.47:1
9 .4 7:1
9 .4 7:1
9 .4 7:1
Altura del suelo (D/T): 29/30mm
Tire Type:
Tire Type:
Tire Type:
Tire Type:
Φ87x34mm(F)
Φ 8 7 x 3 4 m m ( F ) Φ 8 7 x 3 9 m m ( R )
Φ 8 7 x 3 4 m m ( F ) Φ 8 7 x 3 9 m m ( R )
Φ 8 7 x 3 4 m m ( F ) Φ 8 7 x 3 9 m m ( R )
The Max. Ground Clearance:
The Max. Ground Clearance:
The Max. Ground Clearance:
The Max. Ground Clearance:
This manual expatiate the structure of the model. In order to better maintain and replace the spare parts, please keep and take it for reference. The
user who is not familar with the assembling,please contact with the wholesaler,nominated model shops and the Special after-sale service outlets.
The spare parts,appearance of this model will be tiny revised and changed before totally upgrade into a new
version,ZD reserve this rights,and no further notice.
The actual version is subject to the real standard.It would be varied because of different versions.
B-10E
Φ87x39mm(R)
(F/R):29/30mm
( F / R ) :2 9 / 3 0 m m
( F / R ) :2 9 / 3 0 m m
( F / R ) :2 9 / 3 0 m m
B R U S H LE S S /B R U S H E D
R
1:10
Ready To Run
Electric
Scale
This manual expatiate the structure of the model. In order to better
This manual expatiate the structure of the model. In order to better
This manual expatiate the structure of the model. In order to better
This manual expatiate the structure of the model. In order to better
maintain and replace the spare parts,please keep and take it for reference.
maintain and replace the spare parts,please keep and take it for reference.
maintain and replace the spare parts,please keep and take it for reference.
maintain and replace the spare parts,please keep and take it for reference.
The user who is not familar with the assembling,please contact with the
The user who is not familar with the assembling,please contact with the
The user who is not familar with the assembling,please contact with the
The user who is not familar with the assembling,please contact with the
wholesaler,nominated model shops and the Special after-sale service
wholesaler,nominated model shops and the Special after-sale service
wholesaler,nominated model shops and the Special after-sale service
wholesaler,nominated model shops and the Special after-sale service
outlets.
outlets.
outlets.
outlets.
The actual version is subject to the real standard.It would be varied
The actual version is subject to the real standard.It would be varied
The actual version is subject to the real standard.It would be varied
The actual version is subject to the real standard.It would be varied
because of different versions.
because of different versions.
because of different versions.
because of different versions.
2.4G
4WD
Radio

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Kapton EB10 and is the answer not in the manual?

Questions and answers

Summary of Contents for RCm Kapton EB10

  • Page 1 1/10 Scale 4WD Electric off-road buggy Manual B R U S H LE S S /B R U S H E D B-10E 2.4G 1:10 Ready To Run Electric Scale Radio S pe c ific a t io n s S pe c ific a t io n s S pe c ific a t io n s B - 10E...
  • Page 2: Quality Assurance

    B - 1 0 E B-10E IN T R O D U C E INTRODUCE     Thank you for choosing the ZD racing series products. Our company take the target of offering the top Than y k o f u o c r hoosin t s erie p...
  • Page 3: Safety Guidelines

    SAFETY GUIDELINES 1. Don't operation the models close to open fires or near heat source. 2. Operation must be in the open and dry site . 3. The thunderstorm weather is forbidden to operate this product. 4. Away from the high voltage cables. 5.
  • Page 4 EB10 5000 mAh 30C Li-po battery EB10...
  • Page 5 Recommended maintenance tools (not included) 1.5 Assorted Screwdrivers 2.0 Assorted Screwdrivers 2.5 Assorted Screwdrivers 8F5-300150-00-00 8F5-300200-00-00 8F5-200250-00-00 Wire Cutters Needle Nose Pliers Reamer 6Y7-000001-00-00 6T4-000096-00-00 8PT-040001-71-00 Hobby Scissors Hobby Knife 6Y7-000001-00-07 6X0-000028-00-00 Symbols used throughout the instruction manual All kinds of grease Apply CA glue Assemble both Assemble both...
  • Page 6 B-10E EB10 Brushless Car B-10E Brushless Car Brushless Motor Front Tire Battery Brushless ESC Receiver Drive Shaft Servo Rear Tire Wheel Hub Tail Drive Shaft Locknut Gear Box...
  • Page 7 EB10 Brushed Car B-10E Brushed Car Brushed Motor Front Tire Battery Brushed ESC Receiver Drive Shaft Servo Rear Tire Wheel Hub Tail Drive Shaft Locknut Gear Box...
  • Page 8 C H A R G IN G T H E B A T T E R Y P A C K CHARGING THE BATTERY PACK A Once the battery ready to be charged, first plug the AC quick charger into the outlet of AC power A Once the battery ready to be charged, first plug the AC quick charger into the outlet of AC power source, and then connect the battery input/output harness to the charger.
  • Page 9 B-10E Racing Operation Steps Racing Steps Put 4 AA batteries into the battery tank Open the cap of the radio Cover the cap of the radio (Please note the Positive and Negative ) Note: 1. In order to get the better control effect, we recommend you to use AA1.5 V alkaline batteries (not included in the product), the ratio of 1.2 V rechargeable battery effect is better.2.
  • Page 10 The adjustment of Radio First open the transmitter power,connect the Lipo battery power output plugs and electronic governor power input plug. Then turn on the ESC. (The 1 ps 7.4 V battery on the car,when turning on the power supply must pay attention to the positive and negative pole), hearing the tone or the power indicator light is lit.
  • Page 11: Troubleshooting

    TROUBLESHOOTING If you have trouble starting or keeping your love car running, here's a quick checklist of what to look for first. Problem Solution Description Car dies or slows Let it cool and try later Speed control over heats Check for loose wires, dead radio batteries Car is glitching Car has a problem on power or loose crystals.Check motor capacitors,...
  • Page 12: Differential Assembly

    B-10E 1:1 Scale .DIFFERENTIAL ASSEMBLY 7244 M2x10 Socket Cap Screw Add appropriate Add appropriate amount of oil amount of oil 7173 7171 13T大伞齿 7173 7171/7280 7276 7171 φ10xφ5.5x0.3 Washers 7172/7279 7244 7171 7173 7172 7279 7173 7172 Add appropriate 7271 amount of oil 7172 7275...
  • Page 13 1:1 Scale .REAR GEAR BOX ASSEMBLY 26.2mm 7251 7177 M3X10 Pan Self-tapping Screw Set 7270 7175 7270 7176 7175 Add appropriate amount of oil 7175 7272 7271 7170 7271 Ball bearing φ15x10x4 7177 7270 7251 Ball bearing φ10x5x4 7271 7272 E button φ2.5x0.4 .FRONT LOWER SUSPENSION ARM ASSEMBLY 7247...
  • Page 14 B-10E .REAR LOWER SUSPENSION ARM ASSEMBLY 1:1 Scale 7183 7247 7182 7254 7247 M3X12 Flat Head Self-tapping with a gap of 0.10mm Screw Set 7184 7181 50mm 7182 7181 3x30mm Hinge Pin 7184 54.9mm 7181 Susp. Arm Hinge 7254 Pin Brace rear M3X16 Pan Self-tapping Screw Set 50.8mm 7181...
  • Page 15 1:1 Scale .THE ASSEMBLY OF FRONT ANTI-SWAY BAR Front Sway Bar 7258 7194 Set Screw M3x3 Front Lower Suspension Pins right 128.61mm 7259 7192 7250 Set Screw M3x10 Left M3X6 Pan Self-tapping Screw Set 7192 7258 7253 M3X14 Pan Self-tapping Screw Set 7192 7192 7250...
  • Page 16 B-10E 1:1 Scale .FRONT UPPER ROD SET ASSEMBLY The camber of tire can be changed when you adjust the length of the pull rods 7195 Different driving feeling appears with different pull- rod length You can choose appropriate pull rods based on the field The front up pull-rod 3°(selective use) 7264 The front up pull-rod 2°(standard Use)
  • Page 17 1:1 Scale .THE ASSEMBLING OF THE UPPER DECK PILLAR, PIVOTING POINT AND CHASSIS 7249 M3X8 Flat Head Screw Set 7246 M3X10 Flat Head Self-tapping Screw Set 7200 Servo Saver Post 7199 7200 Hexagon of the pivoting point should align to that of baseboard 7198 7199 Aluminium strut...
  • Page 18 B-10E 1:1 Scale .REDUCTION GEAR AND MOTOR ASSEMBLY The screw should be locked in the planimetric position of shaft 7202 7203 7260 7208 7260 7202 7285 Set Screw M4x4 7289 7256 Put a little 7256 7209 screw glue M3X8 Pan Head Screw Set 7204 7268 7268...
  • Page 19: Rear Suspension Assembly

    1:1 Scale .REAR SUSPENSION ASSEMBLY The screw should be locked in the planimetric position of shaft 6.00mm 7260 Set Screw M4x4 7275 7275 φ8xφ5.1x0.3 Washers 7260 7207 7260 Put a little 7246 screw glue M3X10 Flat Head Self-tapping Screw Set 7246 .STEERING ASSEMBLY 7245...
  • Page 20 B-10E 1:1 Scale .STEERING SET ASSEMBLY 7215 7264 Add appropriate 7264 amount of oil M3x4.8 Screw rod 7269 7216 7264 转向组 7269 7269 Ball bearing φ8x5x2.5 7215 Steering Servo Turnbuckle Add appropriate amount of oil .UPPER DECK ASSEMBLY 7251 7197 7257 7257 M3X10 Pan Self-tapping Screw Set...
  • Page 21: Rear Shock Absorber Assembly

    1:1 Scale .FRONT SHOCK ABSORBER ASSEMBLY 7230 The nut should not be 7273 7261 locked too tightly, Add the Shock oil or the E buckle may Lock Nut M2.5 7225 fall of after extrusion 7228 7229 7228 7261 7273 7228 7232 Ball Head Set 7228...
  • Page 22 B-10E 1:1 Scale FRONT SHOCK ABSORBER ASSEMBLY 7255 M3X20 Pan Self-tapping Screw Set 7254 M3X16 Pan Self-tapping Screw Set 7219 7230 7230 Φ7x4.5 Shock End Set 7255 7219 7254 .REAR SHOCK ABSORBER ASSEMBLY 7255 M3X20 Pan Self-tapping Screw Set 7254 M3X16 Pan Self-tapping Screw Set 7220 7230...
  • Page 23: Battery Assembly

    1:1 Scale .SERVO\ ESC\ RECEIVER ASSEMBLY 7252 7211 M3X12 Pan Self-tapping Screw Set Receiver 7286 7245 7283 7286 7287 M3X8 Flat Head Self-tapping 7252 Sponge double- Screw Set 7286 sided tape Sponge double- sided tape 7250 7233 M3X6 Pan Self-tapping Screw Set 7246 M3X10 Flat Head Self-tapping Screw Set...
  • Page 24: Tire Assembly

    B-10E .TIRE ASSEMBLY 7236 7236 7237 7237 1 put the compressed sponge into the tire( Notice: the tire, sponge, of the front tire is narrower than the back tire 7234 7235 2. Largen the tire set and cover it on the tire rim ( Note: You need to distinguish the right side and reverse side according to the texture of the tire because the right...
  • Page 25: Body Assembly

    1:1 Scale BODY ASSEMBLY 7274 R-Pin Set 7239/7240/7241 7243 7274 7238 7274 7238 7274 7274...
  • Page 26 B-10E Diagram of bodyshell tags Kapton EB10 – RCM 200 x 155 mm http://www.rcmitico.es/...
  • Page 28: Replacement Parts

    B-10E REPLACEMENT PARTS 7170 7171 7172 7173 Differential Crown Gear Complete Differential Set Differential Case and Sealing Differential Gear Set (4pcs) 38T+Sealing 7174 7175 7176 7177 Differential Outdrives Diff Pinion Gear 13T (2pcs) Outdrive Gear Box front Gear Box (1pcs) front+rear 7178 7179...
  • Page 29 REPLACEMENT PARTS 7194 7195 7196 7197 Front /Rear Lower Suspension Pins Front Upper rod set 1 /2 /3 Rear Upper rod set 1 /2 /3 Wing Mount Plastics 7198 7199 7200 7201 Slipper Clutch complete Aluminium strut (4pcs) Chassis Servo Saver Post with Main Gear 7202 7203...
  • Page 30 B-10E REPLACEMENT PARTS 7218 7219 7220 7221 Middle Upper Chassis Plate Front Shock Spring(black) Front Shock Set Rear Shock Set 7222 7223 7224 7225 Rear Shock Spring(black) Shock cap Front Shock Rods Rear Shock Rods 7226 7227 7228 7229 Shock adjustmentring Shock absorber piston group Shock Sealing Set (4pcs) Shock seal cover...
  • Page 31 REPLACEMENT PARTS 7244 7245 7246 7247 M3X8 Flat Head Self- M3X10 Flat Head Self- M3X12 Flat Head M2x10 Socket Cap Screw tapping Screw Set tapping Screw Set Self-tapping Screw Set 7248 7249 7250 7251 M3X20 Flat Head M3X6 Pan Self-tapping M3X10 Pan Self-tapping Self-tapping Screw Set M3X8 Flat Head Screw Set...
  • Page 32 B-10E REPLACEMENT PARTS 7268 7269 7270 7271 Ball bearing φ8x5x2.5 Ball bearing φ10x5x4 Ball bearing φ15x10x4 φ2x11 Pin Set 7272 7273 7274 7275 E button φ2.5x0.4 φ8xφ5.1x0.3 Washers Ball Head Set R-Pin Set 7276 7277 7278 7279 φ10xφ5.5x0.3 Washers φ8xφ3.2x0.5 Washers Differential sealring Rear Wheel Shaft Washers 7239/7240/7241...
  • Page 33 REPLACEMENT PARTS R E P L A C E ME N T P A R T S 7283 7284 7285 7286 7 2 8 3 7 2 8 4 7 2 8 5 7 2 8 6 Brushed ESC Brushed ESC Ni-MH 3000mAh 7.2V 15C Ni-MH 3000mAh 7.2V 15C Brushed Motor 540...
  • Page 34 Por medio de la presente RC MITICO S.L. declara que el equipo de radiocontrol cumple los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Hereby, RC MITICO S.L. declares that this Radio Control Equipment is in compliance with the essential requirements and other relevant provisions of Directive 1995/5/EC.

Table of Contents

Save PDF