1. Manuals
  2. Brands
  3. Radio Pulse Manuals
  4. Remote Control
  5. MG2475-RDK
  6. Getting started

Radio Pulse MG2475-RDK Getting Started

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
[MG2475-RDK]
Getting Started
(No. ASW1008)
V0.96
www.radiopulse.co.kr

Advertisement

Table of Contents
loading

Related Manuals for Radio Pulse MG2475-RDK

Summary of Contents for Radio Pulse MG2475-RDK

  • Page 1 [MG2475-RDK] Getting Started (No. ASW1008) V0.96 www.radiopulse.co.kr...
  • Page 2 ASW1008 [MG2475-RDK] Getting Started REVISION HISTORY Version Date Description  The Beta version release. VER.0.91 2015.05.12  Images font modified. VER.0.92 2015.05.15  Contents link modified. VER.0.93 2015.05.21  HEX file name modified. VER.0.94 2015.05.29  RCS image modified. VER.0.95 2015.05.29...

  • Page 3: Table Of Contents

    ASW1008 [MG2475-RDK] Getting Started CONTENTS INTRODUCTION........................... 4 REFERENCE ............................5 [R1] ADT0007-Remote Controller-Simulator User's Guide_V1 0.pdf ............5 [R2] ADT0002-Device Programmer MD User's Guide_En_V2 2.pdf ............5 DEFINITIONS ............................6 KIT CONTENTS ............................. 7 QUICK START GUIDE .......................... 8 5.1.

  • Page 4: Introduction

    ASW1008 [MG2475-RDK] Getting Started 1. INTRODUCTION MG2475-RDK (Remote Controller Development Kit) is the development kit based on MG2475 which is an SOC chip including RF transceiver and 8051 micro controller, by RadioPulse. This document explains how to start with MG2475-RDK.

  • Page 5: Reference

    ASW1008 [MG2475-RDK] Getting Started 2. REFERENCE [R1] ADT0007-Remote Controller-Simulator User's Guide_V1 0.pdf [R2] ADT0002-Device Programmer MD User's Guide_En_V2 2.pdf V0.96 Page:5/31 www.radiopulse.co.kr...

  • Page 6: Definitions

    ASW1008 [MG2475-RDK] Getting Started 3. DEFINITIONS  MG2475: 2.4GHz RF Transceiver Chip in SoC type developed by RadioPulse, applied to ZigBee, IEEE802.15.4-2003, 2006. MG2475-Dongle: ‘RF to USB Bridge Controller’ module in USB dongle type which is  connected to Host. It connects RF communication and USB communication.

  • Page 7: Kit Contents

    ASW1008 [MG2475-RDK] Getting Started 4. Kit Contents  Remote Controller Development Board (MG2470B-RDB) with MG2475 Chip antenna type module(LM2475-C) and Touch pad module (MG2470-TP-TC30Q)  Remote Controller Development Board (MG2470B-RDB) with MG2475 Chip antenna type module(LM2475-C) and Gyro Sensor module (Mg2470-GS-MPU6150) ...

  • Page 8: Quick Start Guide

    ASW1008 [MG2475-RDK] Getting Started 5. Quick start guide 5.1. MG2475-Dongle(Target) to RDB(Controller) MG2475-Dongle and RDB firmware are already downloaded. Each firmware file is like below; MG2475-Dongle : MG2475_RdkTarget_DONGLE.hex  in [Package CD\0. Getting Started Manual\Firmware\] RDB : MG2475_RdkController.hex  in [Package CD\0. Getting Started Manual\Firmware\] 5.1.1.

  • Page 9: Usage Of Rdb

    ASW1008 [MG2475-RDK] Getting Started 5.1.2. Usage of RDB Install RDB: Modules Install power in RDB: Battery or USB Battery power Check 1. * Jumper setting Check 2. * Power switch locate to BAT_ON V0.96 Page:9/31 www.radiopulse.co.kr...
  • Page 10 ASW1008 [MG2475-RDK] Getting Started USB power Check 1. * Jumper setting Check 2. * Power switch locate to USB_ON Enter the paring mode ** Pairing mode will remain 30 seconds. Step 2. * When start the LED toggle, release the buttons.
  • Page 11 ASW1008 [MG2475-RDK] Getting Started Operating: KEY Open the “Notepad” and Press the buttons. Operating: MOUSE Move like the air mouse. V0.96 Page:11/31 www.radiopulse.co.kr...
  • Page 12 ASW1008 [MG2475-RDK] Getting Started Operating: VOICE Enter the “Voice” mode. Step 2. * When start the LED toggle, release the buttons. Step 1. * Press buttons “*” and “#” together.(about 3Sec) Step 3. * Press button “7” to request voice.
  • Page 13 ASW1008 [MG2475-RDK] Getting Started PC setting. V0.96 Page:13/31 www.radiopulse.co.kr...
  • Page 14 ASW1008 [MG2475-RDK] Getting Started Exit the “Voice” mode. Step 2. * When start the LED toggle, release the buttons. Step 1. * Press buttons “*” and “#” together.(about 3Sec) Step 3. * Press button “8” to exit voice. Un-pair Step 2.

  • Page 15: Mg2470-Evb(Target) To Rdb(Controller) : Operating With Rc- Simulator

    ASW1008 [MG2475-RDK] Getting Started 5.2. MG2470-EVB(Target) to RDB(Controller) : Operating with RC- Simulator Each firmware file is like below; MG2470-EVB : MG2475_RdkTarget_SIM.hex  in [Package CD\0. Getting Started Manual\Firmware\] RDB : MG2475_RdkController.hex  in [Package CD\0. Getting Started Manual\Firmware\] Usage of Remote Controller-Simulator 5.2.1.
  • Page 16 ASW1008 [MG2475-RDK] Getting Started (B) Touch Pad pointer position (C) Pair status indicator. (D) Handle the received voice data (E) Mouse position information window. (F) Pair Request button. (G) Cold-Reset button. Install MG2470-EVB+LM2475-EM V0.96 Page:16/31 www.radiopulse.co.kr...
  • Page 17 ASW1008 [MG2475-RDK] Getting Started Pairing * Click “Start Pairing” button Pairing Success When the pairing is completed, the pair status image of Remote-controller simulator is changed as below; V0.96 Page:17/31 www.radiopulse.co.kr...

  • Page 18: Usage Of Rdb

    ASW1008 [MG2475-RDK] Getting Started 5.2.2. Usage of RDB Install RDB: Modules Check 1. * Insert to J3 Install power in RDB: Battery or USB Battery power Check 1. * Jumper setting Check 2. * Power switch locate to BAT_ON V0.96 Page:18/31 www.radiopulse.co.kr...
  • Page 19 ASW1008 [MG2475-RDK] Getting Started USB power Check 1. * Jumper setting Check 2. * Power switch locate to USB_ON Enter the paring mode ** Pairing mode will remain 30 seconds. Step 2. * When start the LED toggle, release the buttons.

  • Page 20: Mg2475-Dongle(Target) To Rcu(Controller)

    ASW1008 [MG2475-RDK] Getting Started 5.3. MG2475-Dongle(Target) to RCU(Controller) MG2475-Dongle and RCU firmware are already downloaded. Each firmware file is like below; MG2475-Dongle : MG2475_RdkTarget_DONGLE.hex  in [Package CD\0. Getting Started Manual\Firmware\] RCU : Firmware is not provided. 5.3.1. Usage of MG2475-Dongle...

  • Page 21: Usage Of Rcu

    ASW1008 [MG2475-RDK] Getting Started 5.3.2. Usage of RCU Enter the paring mode * Before using RCU, the user must attach the battery (alkaline AA * 2) to the RCU. ** Pairing mode will remain 30 seconds. Step 2. * When start the LED toggle, release the buttons.
  • Page 22 ASW1008 [MG2475-RDK] Getting Started Un-pair Step 2. * When start the LED toggle, release the buttons. Step 1. Step 3. * Press buttons “*” and “#” * Press button together.(about 3Sec) “2” to un-pair. V0.96 Page:22/31 www.radiopulse.co.kr...

  • Page 23: Appendix A. Firmware Download

    ASW1008 [MG2475-RDK] Getting Started Appendix A. Firmware download. CP210X DRIVER INSTALLATION The CP210x on EVB is USB-to-UART controller. The driver for CP210x should be installed first, because it makes a PC to recognize the EVB. The following is the installation step.
  • Page 24 ASW1008 [MG2475-RDK] Getting Started (D) If the driver is not installed, it can be installed manually when CP210x is connected to the PC. The driver is located in “C:\Program Files\Silabs\MCU\CP210x” folder. NOTICE For other OS, the driver is available from www.silabs.com...

  • Page 25: Check Com Port

    ASW1008 [MG2475-RDK] Getting Started CHECK COM PORT Connect MG2470B-RDB to PC using “USB Receptacle Mini B 5pin” port of MG2470B-RDB. Set the power switch to “USB_ON”. Then, The PC recognizes MG2470B-RDB as COM port. The number of COM port is checked as follows.
  • Page 26 ASW1008 [MG2475-RDK] Getting Started (C) Port (COM & LPT) NOTICE If two or more EVBs are connected to one PC and the CP210x’s IDs are same, all expected ports are not displayed because the number of ports are same. Then, the CP210x’s ID should be unique by using “CP21xx Customization Utility”...

  • Page 27: Firmware Download

    ASW1008 [MG2475-RDK] Getting Started FIRMWARE DOWNLOAD To download the firmware (*.hex) of sample application, first, set the ISP switch to “ISP” and press “Reset”. Then, execute “RadioPulse Device Programmer MD”.(see also [R2]) (A) Select the device as “MG2475” and download method as “Direct-Download”.

  • Page 28: Appendix B. Operating With Rdb-Rdb

    ASW1008 [MG2475-RDK] Getting Started Appendix B. Operating with RDB-RDB RDB to RDB scenario operates like microphone(Controller) & speaker(Target). Each firmware file is like below; Controller RDB: MG2475_RdkController.hex  in [Package CD\0. Getting Started Manual\Firmware\] Target RDB : MG2475_RdkTarget_RDB.hex  in [Package CD\0. Getting Started Manual\Firmware\]...

  • Page 29: Voice: Connect (Only Controller)

    ASW1008 [MG2475-RDK] Getting Started Voice: Connect (Only Controller) Step 2. * When start the LED toggle, release the buttons. Step 1. * Press buttons “*” and “#” together.(about 3Sec) Step 3. * Press button “7” to request voice. Voice: Disconnect (Only Controller) Step 2.

  • Page 30: Appendix C. Usage Of Mg2470B-Rdb Key Scan

    ASW1008 [MG2475-RDK] Getting Started Appendix C. Usage of MG2470B-RDB Key Scan Key mapping – Function mode Step 2. * When start the LED toggle, release the buttons. Step 1. * Press buttons “*” and “#” together.(about 3Sec) V0.96 Page:30/31 www.radiopulse.co.kr...
  • Page 31 ASW1008 [MG2475-RDK] Getting Started RadioPulse Inc U-SPACE #1106, 660, Daewangpangyo-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-400, Korea URL: www.radiopulse.co.kr Tel: +82-70-7113-0925 Fax: +82-70-7113-0987 sue@ixys.net About RadioPulse Inc. RadioPulse is a Being Wireless solution provider offering wireless communication & network technologies and developing next generation wireless networking technologies.

Table of Contents