Summary of Contents for ZAETECH TouchBox
- Page 1 TOUCHBOX W I R E L E S S C O N T R O L L E R iPhone I N S T R U C T I O N M A N U A L...
-
Page 2: Wiring Diagram
Thank you for purchasing TouchBox by ZAETECH. Disclaimer – TouchBox is for show and off road use only. It may not be used while the vehicle is running. By using this device you are agreeing to the terms of use and warranty on page 11. -
Page 3: Installation
1) Reference the wiring diagram on page 1 to connect the TouchBox valve control wires. 2) Plug each of the 8 TouchBox valve control wires to its corresponding T- Tap connector on your valves. Note: Ensure that the red spade connector is fully inserted straight into the blue T-Tap connector. - Page 4 4) Tape the ends of all unused auxiliary wires. 5) Plug the wiring harness into the TouchBox device. Note: The plug on the TouchBox device will glow red when powered. Note: Do not connect auxiliary accessories until the main harness is plugged in.
- Page 5 Note: Your iPhone will automatically connect to your TouchBox when you’re near your vehicle. Step 7: 1) Open the TouchBox app and you will be prompted to enter your device password. 2) Enter the password found on the bottom of your TouchBox device.
- Page 6 To ensure safety, this screen will only be active when you have a solid connection to a TouchBox device. You can also change the theme in the options menu. When the ignition is on this screen will remain lit but control of the valves will be disabled.
- Page 7 If you connect to another TouchBox, it will load the last settings you saved for that device. We plan on adding a lot more options as time goes on so make...
-
Page 8: Additional Features
5v device (i.e. aftermarket alarm functions). To use these with 12v devices (i.e. air valve or air horn) a 5v triggered relay is required for each auxiliary function. The TouchBox Auxiliary Relay, a 12v relay board with 5v triggers, is available to purchase separately. It includes 3,... -
Page 9: Detailed Information
• There is no way for you to change your password. Use caution when giving it out. • More then one iPhone can be connected to a TouchBox Wi-Fi network simultaneously. The iPhone that opens the app with the correct password first will have control over the device. -
Page 10: Troubleshooting
TROUBLESHOOTING I can’t connect to my TouchBox device • Make sure the TouchBox device powered on and the plug is glowing red. If you don’t see the red glow then your device is not receiving power. • Your TouchBox device may have encountered an error during its last connection and may be unable to establish a new connection. -
Page 11: Terms Of Use
TERMS OF USE • TouchBox is for show and off road use only. It may not be used while the vehicle is running. • TouchBox is designed to work with 8 electric valves. It is only to be installed with valves that draw less than 2 amps. - Page 12 ! 12! V1.3!