Nedap PowerRouter Application Manualline page 14

II.
Reinstall
With this setting you can reinstall the PowerRouter system. Please
be aware of the fact that when you reinstall the system you will
lose the basic settings you already have entered. If you want to
cancel the reinstallation, press "Cancel" in the upper-right corner
of this tool.
III.
Check for updates
Check if there are updates available for your system. These
updates include new versions of the system firmware, if available.
> This action requires an Internet connection.
>
With this option the firmware will only be loaded into the tool.
w Update firmware
This option allows you to update the firmware of the connected
system. If a newer firmware version is available for your system,
this will be indicated. You will be asked to confirm, and then the
update will begin. A complete update can take up to 15 minutes
depending on which modules will be updated. During this period
the system will not be operational.
The installation tool already includes the latest firmware versions,
so no internet connection is required to perform a system update.
The following conditions must be met before starting an update:
>
The PowerRouter must be properly connected to the grid.
>
A battery must be connected to the battery module.
If these conditions are not met, starting an update will result in an
incomplete update. In that case the system becomes unusable
until the entire update is completed.
V.
Language
Change the language of the installation tool.
Once all the settings are completed, the PowerRouter is
ready to function properly and ready for use.
I.
Settings
II.
Reinstall
III.
Check for updates
IV.
Update firmware
V.
Language
Figure 30: Advanced menu
Figure 31: Check for updates
Figure 32: Update firmware
Advanced
14