ENGLISH
F INSTRUCTIONS FOR USE
, BEFORE STARTING THE CUT
•
Inspect the clipper making sure that it is free from hair and dirt.
•
Seat the person so that their head is approximately at your eye level.
•
Before cutting, always comb the hair so it is tangle free and dry.
, TO ATTACH A COMB
•
Hold the comb with its teeth upward.
•
Slide it onto and along the clipper blade until the front of the comb firmly sits
against the clipper and click into position.
, TO REMOVE THE COMB
•
Holding the clipper with the blades facing away from you, firmly push the
comb upward and away from the blades.
•
Each comb attachment is marked accordingly on its outside middle surface.
, Please note a 0.5mm cutting length can be achieved from holding the
clipper, with no comb attachment, perpendicular to the skin. A 1.0mm
cutting length is achieved from holding the clipper, with no comb
attachment, with the top of the blade surface in contact with the skin.
•
This is with the taper setting set at the closest gap between the blades.
Guide Combs
1 (Grade 0)
2 (Grade 1)
3 (Grade 2)
4 (Grade 3)
5 (Grade 4)
6 (Grade 5)
7
8
9
4
Cutting Length
1.5mm
3mm
6mm
9mm
12mm
16mm
18mm
22mm
25mm