sinoptim Res-Q-Rinse How To Use

Advertisement

How to Use Res-Q-Rinse

A big thank you for choosing Res-Q-Rinse
Before each use, look for any damage or discoloration in bottle, mouthpiece, nosepiece and
tube. If discoloration is present, clean thoroughly by using the cleaning instructions on the
reverse side of this sheet. If damage is present, replace the device.
Safety: Res-Q-Rinse
DON'T LIKE TO READ? CHECK OUT OUR NIFTY HOW-TO VIDEO AT RESQRINSE.COM.
1. Remove screw-top from bottle.
2. Add contents of
®
Res-Q-Rinse
packet to bottle.
FIG 1
4. Cover bottle top
with palm of hand
and shake gently
to fully dissolve
saline powder.
FIG 3
6. Align and position mouthpiece and nosepiece:
a. Adjust tube up or down as needed. Note, nosepiece should
create a firm seal inside nostril, but without stretching.
b. Cup lips around mouthpiece and position nosepiece just
inside nostril opening.
7. Lean slightly
forward over
sink to allow
saline solution
to drain into
basin.
FIG 6
9. Continue blowing as solution flows up through nosepiece,
through nasal cavity and out opposite nostril into sink or
wherever you choose to rinse. Pressure of flow is controlled by
force of blowing.
per nostril.
FIG 8
PRO TIP: RINSING IN THE SHOWER WORKS GREAT. THE NEIGHBOR'S FLOWERBED? SURE. WHY NOT?
10. Repeat for opposite side as needed.
IMPORTANT: DO NOT USE TAP WATER WITH THIS DEVICE. USE DISTILLED OR PURIFIED WATER ONLY.
®
is not a toy. Please keep all parts away from children.
saline
FIG 1
FIG 3
FIG 6
Use about half of saline solution, or 5 ounces,
®
®
. Before first use, clean the product thoroughly.
3. Add room temperature
distilled or purified water
ONLY. 10 fl oz (300mL)
and 1 Res-Q-Rinse
packet = Isotonic.
DO NOT USE TAP WATER
WITH THIS DEVICE.
5. Replace screw-top and
align mouthpiece with
back of bottle.
DO NOT TWIST, ATTEMPT TO BEND
OR PULL ON MOUTHPIECE. BREAKAGE
MAY OCCUR.
8. Seal lips over mouthpiece,
tilt head away from bottle,
then gently squeeze bottle
and begin blowing through
mouthpiece to initiate flow
of saline solution. Do not
blow as hard as you can, just
enough to create a steady
flow.
FIG 7
DO NOT USE IF NASAL PASSAGES ARE COMPLETELY BLOCKED.
FIG 2
®
saline
FIG 2
FIG 4
FIG 4
FIG 5
FIG 7
DISTILLED
2
H
0
FIG 5
FIG 8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Res-Q-Rinse and is the answer not in the manual?

Questions and answers

Summary of Contents for sinoptim Res-Q-Rinse

  • Page 1 ® How to Use Res-Q-Rinse ® A big thank you for choosing Res-Q-Rinse . Before first use, clean the product thoroughly. Before each use, look for any damage or discoloration in bottle, mouthpiece, nosepiece and tube. If discoloration is present, clean thoroughly by using the cleaning instructions on the reverse side of this sheet.
  • Page 2 Replace bottle after three months. Visit website for subscription options. About Our Saline Simply put, nasal rinsing works. And at SinOptim we take great pride in our simple, all-natural saline formulas. Every Res-Q-Rinse ®...

Table of Contents