Dry Vacuuming; Regular Vacuuming; Connecting Vacuum Cleaner - Bosch GAS18V-3 Operating Instructions And Safety Instructions

160992A45R_GAS18V-3 12/21/17 12:40 PM Page 12
condition of the filter, therefore clean
the filter regularly. Replace any
damaged filters immediately.
- Switch the unit off and replace the
battery pack (See Inserting And
Releasing Battery Pack).
- Unlock the latches 2 and remove the
motor unit 5 (Fig. 10).
- Turn the filter 27 as far as it will go in
the direction of "
from the filter base 28 (Fig. 12).
If the filter is dry:
- To preserve the maximal suction
power, brush down the flaps of the
filter regularly with a soft brush
or
If the filter is wet:
- Rinse the filter 27 under running
water and then leave it to dry
thoroughly.
or
Replace a damaged filter:
- Insert the filter 27 into the filter base
28 and turn it as far as it will go in the
direction of "
- Reattach the motor unit 5 and lock
the latches 2. Make sure that the
latches engage firmly.

▶ Dry Vacuuming

▼ REgULAR VACUUMINg

- To switch on the vacuum cleaner,
briefly press the on/off button 3.
- To switch off the vacuum cleaner,
press the On/Off button 3 again.
To save energy, only switch the vacuum
cleaner on when using it.

▼ CONNECTINg VACUUM CLEANER

TO POWER TOOLS AND
ATTACHMENTS
This vacuum cleaner can also be
connected to various power tools or
their attachments to easily extract and
collect dust. These power tools include
sanders, routers, planers and saws. To
determine if any attachment and/or
adapter is required to connect a given
power tool and vacuum hose, consult
the Bosch
(www.boschtools.com). Depending on
the dust port on the power tool or
attachment, the optional VX120 power
12
Operating Instructions
" and remove it
" (Fig. 13).
catalog or website
Fig. 12
A
Fig. 13
A
27
Fig. 14
26
B
27
B
28
14
15