Download Print this page

General Information; Safety Information; Preparation - Patio Sense 61908 Assembly Instructions Manual

Cast aluminum bistro set

Advertisement

ITEM 61908, CAST ALUMINUM BISTRO SET

GENERAL INFORMATION:

Your new Bistro Set is made from the finest materials available. It should provide many
years of enjoyment with minimal care.
Keep your Bistro Set clean and apply a coat of wax a few times a year. For best results,
clean the Bistro Set with warm soapy water and use an outdoor furniture wax. If you use
furniture covers, always make sure the Bistro Set is clean and completely dry before
covering as mold may form in dark, wet places. Check the bolts on your Bistro Set
regularly to make sure they are tight.
To provide a rust free product this Bistro Set is made of Cast Aluminum which is a
relatively soft material. Be careful not to over tighten your hardware. Stripped
hardware is not covered under the manufacturer's warranty. The weight limit for this
Bistro Set is 225 lbs.

SAFETY INFORMATION:

WARNING
DO NOT stand or allow children to stand on the assembled product.
DO NOT tighten bolts completely until instructed to do so. After final alignment, make
sure all nuts and bolts are securely fastened.
NEVER use a power tool to assemble or tighten your furniture. Perform periodic checks
to make sure the hardware is secure and tighten if needed.
CAUTION
READ all instruction before beginning assembly. Failure to do so may result in faulty
assembly and potential injury. Assemble the item on a soft, non-abrasive surface such as
a carpet or cardboard to avoid damaging the item.

PREPARATION

Before beginning assembly, make sure all parts are present. Compare parts received
with the "Parts List." If any part is missing or damaged, do NOT attempt to assemble the
product. Contact our Customer Service Hotline toll-free at 1-866- 9 85-7877, Mon – Fri,
9AM to 6PM, EST.
2

Advertisement

loading