Download Print this page

Gryphon Wet-Belt Sander Instructions

• Wear eye protection and protective clothing

• Keep fingers away from belt and other moving parts when

using the sander

• Use only belts designed for this tool

• Always use water in the base when grinding hard materials

(glass, stone, etc.) Refresh water as required. Only sand

without water when sanding soft material such as wood.

Wet-Belt Sander

Important Precautions

Gryphon

Instructions

Table of Contents

Do you have a question about the Wet-Belt Sander and is the answer not in the manual?

Page 1 Gryphon Wet-Belt Sander Instructions Important Precautions • Wear eye protection and protective clothing • Keep fingers away from belt and other moving parts when using the sander • Use only belts designed for this tool • Always use water in the base when grinding hard materials (glass, stone, etc.) Refresh water as required.
Page 2: Belt Installation
Setup Your new belt sander comes assembled and ready for use. When choosing a location to use the sander, remember that there will be a small amount of water splash during use. Also, it advisable to choose a location with good lighting and good ventilation.
Page 3 Grinding glass and rock will generate a tremendous amount of heat in the belt, and requires some method of cooling the belt. In the Gryphon Wet Belt Sander, the cooling is provided by a wet sponge that contacts the bottom of the belt. e sponge remains wet because it sits in a water reservoir.
Page 4 You should not wash the sludge down your drain, as it will eventually clog your plumbing. If you have any questions regarding the setup or use of your Wet Belt Sander, please call: Gryphon Corporation www.gryphoncorp.com 818-890-7770 ®...