Download
Share
Print this page
  1. Manuals
  2. Brands
  3. EccoBike Manuals
  4. Scooter
  5. GAZELLE
  6. User manual

EccoBike GAZELLE User Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
GAZELLE
USER's MANUAL

Advertisement

loading

Summary of Contents for EccoBike GAZELLE

  • Page 1 GAZELLE USER's MANUAL...
  • Page 2 EccoBike™ by email to contact@eccobike.ca or call 1-888-401-3226 to check whether you need a return and refund. Get more information about warranty and refund policy on our website at https://eccobike.ca/ return/ Open the carton box and take out your Gazelle carefully. The package has following items: FRONT Gazelle...

  • Page 3: Install Front Wheel

    Install Front Wheel Make sure the brake disc is placed in the center of caliper gap and front wheel can rotate freely without any noise. When the brake disc is not in the gap, DO NOT pull brake lever.

  • Page 4: Install Pedals

    Install Pedals Use the pedal marked with an “L” on the left side and the right pedal marked with an “R” on the right side (side with drivetrain gears). The right-side pedal has a right-hand thread (removes counterclockwise, installs clockwise); the left side pedal has a left-hand thread (removes clockwise, installs counterclockwise).
  • Page 5 Insert, Remove or Adjust Saddle Height...
  • Page 6 Charge Battery before Your First Ride *On charger adapter, red light stands for charging, while green light stands for charging finished.
  • Page 7 If you are not going to use the battery for long time ,take out the battery  out of your EccoBike™ and store it with 50% battery left. Do not use battery when it has less than 10% capacity left.
  • Page 8 Uninstall & Install Battery Besides charging the battery with it’s in the ebike, you can also take out the battery home or office to find a safe place to charge. Turn the key to unlock position, then PULL the lever on top of battery to remove battery. When you install battery, do the same but start from the bottom part.
  • Page 9 C300S Manual...
  • Page 10 General: This Display should be used between -20℃ to 60℃. Dimension（Unit：mm） Button 3 buttons, including M, + and - M is for on/off switch and display switch. + is for up level and – is for down level.
  • Page 11 Press M to switch it on. It will shut down automatically after 5 mins if it’s not used. Current display : Showing output current. Each block stands for 2Amp. If current exceeds 12Amp, it shows 6 blocks. Backlight : hold + for 1.5s to turn on the backlight and front light. 6KM/H walking assistant : hold –...
  • Page 12 In setting interface: Press – to erase ODO, riding time and max speed Set speed limit. Set wheel diameter. For beach cruiser, please set 26inch. For 26inch fat tire models, please choose 28inch. Switch between KM/H and MPH...

  • Page 13: Battery Display

    Display: Under use interface, press M to switch to display: ODO, single time distance, riding time, max speed, or circularly display all. : Circularly display. Battery Display Six blocks: full battery Last block twinkle: really low battery. Must stop and charge immediately. low battery twinkle Shooting Brake ERROR 01: Current abnormal or MOSFET broken...
  • Page 14 ERROR 04: Hall sensor signal abnormal ERROR 05: Brake signal abnormal ERROR 06: under voltage ERROR 07: Motor protection, please do not block the motor from rotating. ERROR 08: Controller communication abnormal. ERROR 09: LCD communication abnormal.
  • Page 15 LEDS, fuses, etc. For more informatin visit: https://eccobike.ca/warranty If the warranty is void for any reason the customer shall bear any repair or replacement costs resulting from vehicle misuse, negligence or abuse.
  • Page 16 The warranty will be voided by any of the following circumstances: （1） Failure to follow all directions or recommendations listed in this warranty and user’s manual. （2） Cycling collision, accident or vehicle damage caused b y careless parking or storage. （3）...
  • Page 17 Due to the nature of the product some components must be exclusive from the manufacturer such as but not limited to the battery, motor, main gauge c luster, controllers, Led headlights, brake drums or disc rotors and pads etc. Other components such as tires, tubes, saddle, racks, baskets may be used from market-ready or compatible prod-ucts previous approval from the retailer or manufacturer.
  • Page 18 Check to see that all externally visible connectors are securely connected and pressed. All Eccobike™ e-bikes come with easy plug-in adaptors. Ensure the battery is in the locked position with the key switch lock.
  • Page 19 Check the wheels and tire inflation. Inflate the tire to the air pressure recommended to the side wall of the tire. If lower recommendation allies to the rim, inflate to a lower value. Warning: Excess air pressure can cause the tire to explode off the rim, causing permanent hearing loss, or if riding, a loss of control.
  • Page 20 If the brakes do not cut off the power immediately discontinue use and contact EccoBike™. If you believe that any other items in the above checklist are out of order immediately stop use until the issue is serviced.
  • Page 21 When you stop pedaling, there is a 1-2 second delay before pedal assist shuts off. This is to reduce the pedal assist power surging on and off whenever you stop pedaling momentarily, usually to adjust your foot on the pedals or your seating position.

  • Page 22: Wheels And Tires

    * EccoBike™ reserves the right, at its sole discretion, to change, modify, add or remove portions of these Terms of Use, Including the manuals and check lists at any time. It is your responsibility to check these Terms of Use periodically for changes.
  • Page 23 Unit 816 1015 Columbia St., New Westminster, BC, V3M 6V3, Canada Contact@eccobike.ca Toll free 1(888)401-ECCO(3226) Get more information of promotion, coupon and new product launch at: www.eccobike.ca...