Tripp Lite SRCOOLNET2 Installation And Quick Start Manual page 9

Snmp/web management accessory

Table of Contents

Available languages

Installation

4-5

Remove Configuration Cable: Remove the configuration cable that connects

the SRCOOLNET2 to the computer.

5 - Test and Configure

5-1

Test Network Connection: After an IP address has been assigned to the

SRCOOLNET2, try to access it with a Web browser that supports Java™. Open a

Web browser on a computer connected to the LAN and enter the SRCOOLNET2's

IP address. The user name is localadmin and the default password is localadmin.

After you enter the user name and password, the PowerAlert Status page will

appear in the browser window. For more information about configuration and

operation of the managed device, refer to the Owner's Manual, available for

download at www.tripplite.com.

Note: When using the SRCOOLNET2 with the SRCOOL7KRM or SRCOOL18K, do

not use the cooling unit's manual control panel.

15-02-247-93342E.indb 9

4/9/2015 9:52:08 AM

Table of Contents

Chapters

Table of Contents

Do you have a question about the SRCOOLNET2 and is the answer not in the manual?