Advertisement
Quick Links
THIS USER GUIDE SHOULD ALWAYS BE USED IN CONJUNCTION WITH THE USER MANUAL
1. Preparing the machine
Adjust the handle to an upright
position by turning the handle
lever on the side of the machine
and securing in position.
Return the machine to the upright
position.
2. Using the machine
Fully unwind the supply cord from
the handle and plug into a
convenient socket outlet.
UK-ORBISECO-REV.00 (0218)
Orbis eco User Guide
Pull the handle down until it rests
on the floor and the brush guard
is raised.
Adjust the handle to a
comfortable working position
using the handle lever.
Fit the brush or drive board and
pad onto the drive plate and
rotate it anti-clockwise until
secure.
If you have a duo machine, select the
speed you wish to operate at. Always
ensure the machine is switched off
before changing the speed setting.
Advertisement
Related Manuals for Truvox International Orbis eco
Summary of Contents for Truvox International Orbis eco
-
Page 1: Preparing The Machine
Orbis eco User Guide THIS USER GUIDE SHOULD ALWAYS BE USED IN CONJUNCTION WITH THE USER MANUAL 1. Preparing the machine Adjust the handle to an upright Pull the handle down until it rests Fit the brush or drive board and... - Page 2 Push the power button and then The normal movement of the To stop the machine release both press and hold the switch triggers machine is from side to side across switch triggers. to start the machine. The switch the floor. Whilst it is engaged in the Do not leave the machine triggers must be held whilst using normal working position, lower the...
Need help?
Do you have a question about the Orbis eco and is the answer not in the manual?
Questions and answers