10Base-T Cable Connection - Panasonic KX-TDA0480 Getting Started

2.2 Cable Connection
2.2.2

10BASE-T Cable Connection

Use a standard 10BASE-T cable with an RJ45 connector to interconnect the VoIP Gateway
Card with a network device.
1.
Connect the RJ45 connector into the 10BASE-T/LAN port on the VoIP Gateway Card's
front panel.
2.
Connect the other end of the cable to the remote LAN equipment.
PC
PC
When connecting the VoIP Gateway Card directly to a router or PC, use a 10BASE-T cross
(rollover) cable; when connecting to a switching HUB, use a 10BASE-T straight cable.
18 Getting Started
Router
Switching Hub
10BASE-T Cross (Rollover) Cable
Router
RJ45
10BASE-T Straight Cable
RJ45