Alien ALR-9650 Quick Installation Manual
Hide thumbs
Also See for ALR-9650:
- Hardware setup manual (26 pages) ,
- Hardware setup manual (24 pages)
Advertisement
Cautions & Warnings!
Reader antennas should be positioned so that personnel in
the area for prolonged periods may safely remain at least 23
cm (9 in) in an uncontrolled environment from the antenna's
surface. See FCC OET Bulletin 56 "Hazards of radio
frequency and electromagnetic fields" and Bulletin 65
"Human exposure to radio frequency electromagnetic fields."
System Requirements
To operate the reader and the Alien RFID Gateway demo
software you will need the following:
•
PC running Windows® 98 or higher, with minimum 200
MHz speed, and 128 MB RAM
•
Minimum of 45 MB of available disk space
•
Ethernet connectivity
•
CD-ROM drive
•
120/220 VAC standard power outlet
Alien Technology Corp.
18220 Butterfield Blvd.
Morgan Hill, CA 95037
Tel 408-782-3900
Fax 408-782-3910
http://www.alientechnology.com
8102092-000 Rev A
ALIEN TECHNOLOGY
QUICK
INSTALLATION
GUIDE
ALR-9650
December 2007
®
Advertisement
Table of Contents
Related Manuals for Alien ALR-9650
Summary of Contents for Alien ALR-9650
- Page 1 Bulletin 65 “Human exposure to radio frequency electromagnetic fields.” QUICK INSTALLATION System Requirements To operate the reader and the Alien RFID Gateway demo software you will need the following: GUIDE • PC running Windows® 98 or higher, with minimum 200 MHz speed, and 128 MB RAM •...
- Page 2 Power over Ethernet (PoE) “LAN+DC” power supply connector. To launch the Alien RFID Gateway software, double-click on its icon (located directly on the desktop, and under Start / Programs / Alien Connect a second straight-through Ethernet cable from the PoE RFID / Gateway / Alien RFID Gateway).
Need help?
Do you have a question about the ALR-9650 and is the answer not in the manual?
Questions and answers