Audio Set Menu - Sony XDCAM EX PMW-EX1 Operating Instructions Manual

CAMERA SET
Menu items Subitems and setting values Contents
Steady Shot On / Off
Setting the image
stabilizer

AUDIO SET Menu

AUDIO SET
Menu items Subitems and setting values Contents
Audio Input TRIM CH-1
–8 dBu to –65 dBu (–41 dBu)
Setting for audio
inputs
TRIM CH-2
–8 dBu to –65 dBu (–41 dBu)
AGC Link
Linked / Separated
1KHz Tone
On / Off
Wind Filter CH-1
On / Off
Wind Filter CH-2
On / Off
EXT CH Select
CH-1
CH-1/CH-2
Audio Output Monitor CH
CH-1/CH-2 (CH-3/CH-4)
Setting for audio
CH-1+CH-2 (CH-3+CH-4)
outputs
CH-1 (CH-3)
CH-2 (CH-4)
Output CH
CH-1/CH-2
CH-3/CH-4
Alarm Level
0 to 10 (5)
Beep
On / Off
Turn the Steady Shot (image stabilizer) function on/off.
Finely adjust the sensitivity of channel 1 of external
microphone input in steps of 3 dB.
Finely adjust the sensitivity of channel 2 of external
microphone input in steps of 3 dB.
Select the gain link condition when the audio level adjustment
is in AGC mode.
Linked: To vary the CH-1 gain and the CH-2 gain in
synchronization.
Separated: To vary the CH-1 gain and the CH-2 gain
independently according to the respective levels.
Turn the 1-kHz reference tone signal on/off.
Turn the wind filter for channel 1 on/off.
Turn the wind filter for channel 2 on/off.
CH-1: To record channel 1 audio input on both channels 1
and 2.
CH-1/CH-2: To record channel 1 and channel 2 inputs on the
respective channels.
Select the audio channel(s) to be fed to the headphones and
the built-in speaker.
CH-1/CH-2 (CH-3/CH-4): Stereo
CH-1+CH-2 (CH-3+CH-4): Mix
CH-1 (CH-3): CH-1 (CH-3) only
CH-2 (CH-4): CH-2 (CH-4) only
( ): with Output CH set to "CH-3/CH-4"
Select audio output channels from either channels 1 and 2 or
channels 3 and 4.
Set the alarm sound volume.
Select whether or not to sound a beep upon each operation.
Setup Menu List 101