Page 1
BLE Beacon RS-232 Reader user manual V1.3 2018.06.24 Beacon RS-232 Reader Bluetooth BLE “Uconnect”, “iBeacon”, “Eddystone” or “Altbeacon” Model: BLE-232R 1. Package content: BLE Beacon RS-232 Reader Package Contents: BLE RS-232 adapter x 1 Screw x2, Nut x 2 ...
Page 2
▲ DCE ▼ DTE Swap TX & RX DIP Switch 3. Packet Format: 3.1 All DIP switch is “0” by default. The reader will filter “Uconnect”, “iBeacon”, “Eddystone” or “Altbeacon”. $<msg type>,<reader id>,<tag type>,<tag id>,<battery>,<button>,<G-sensor>,<sensor>,<RSSI># Field Description start of report msg type Type of message ex.
Page 3
BLE Beacon RS-232 Reader user manual V1.3 2018.06.24 tag id 6 bytes ID of tag in hex => 12 chars tag batt (*)(**) batt voltage of tag in 1/10 volt unit tag button status (*) button status ex. 0: released, 1: pushed tag motion status (*) motion status ex.
Page 4
BLE Beacon RS-232 Reader user manual V1.3 2018.06.24 5. Wireless or Wire communication integration: (option, please contact the supplier) 5.1 WiFi RS-232 (Model: WA-232E) 5.2 Ethernet RS-232 (Model: EA-232) 5.3 Bluetooth V2.1 SPP RS-232 (Model: BT-232B or BT-232B-E) 5.4 LoRa or Wi-Sun RS-232 converter (Model: LORA-232, Wi-Sun-232) The reader will connect with one of the above communication to bridge the tag data to the controller.