Advertisement
20-427 Owner's Manual Draft
your scanner's keypad
WX (Weather)/(skywarn) – scans through the seven preprogrammed weather channels, or
jumps to a Skywarn channel you programmed (300 CH).
MAR (Marine) – lets you search the scanner's preprogrammed marine band.
F/P (Fire/Police) – lets you search the scanner's preprogrammed fire/police band.
AIR (Aircraft) – lets you search the scanner's preprogrammed aircraft band.
HAM (Amateur radio) – lets you search the scanner's preprogrammed amateur radio band.
FUNC (Function) – lets you use various functions by pressing this key in combination with
other keys.
PRI (Priority) – sets and turns the priority function on or off.
ATT (Attenuate) – turns attenuation on to reduce the scanner's sensitivity and block
extremely strong signals, or turns it off to return the sensitivity to normal.
TUNE – press TUNE, PAUSE to tune to a frequency.
PAUSE – pauses search or tune operation.
SCAN/(stalker) – scans through the programmed channels, or activates the Signal Stalker
II function.
MAN (Manual) – stops scanning and lets you directly enter a channel number.
/¥ or ¥/ – selects the scan or search direction.
Number keys – press to enter a number or a character (in text mode).
•/DELAY – enters a decimal point (necessary when programming frequencies), or programs
delay time for the selected channel/search bank.
ENT (Enter) – completes the entry of frequencies.
DIM (Dimmer) – adjusts the backlight level (Light, Dark, or OFF).
L/OUT (Lock Out) – lets you lock out a selected channel, skip a specified frequency during
search, or lock out a selected ID code.
CLEAR – clears an incorrect entry.
PROG (Program) – programs frequencies in channels
PWR/VOL/SQ – long knob turns OFF/ON, and controls volume. Short knob controls
Page 2 of 36
Advertisement
