1. Manuals
  2. Brands
  3. Mouser Manuals
  4. Motherboard
  5. IB970
  6. User manual

Mouser IB970 User Manual

3rd gen. intel core i7/i5 + b75 pch full size cpu card
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IB970
®
TM
3rd Gen. Intel
Core
i7/i5
+ B75 PCH
Full Size CPU Card
USER'S MANUAL
Version 1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IB970 and is the answer not in the manual?

Questions and answers

Related Manuals for Mouser IB970

Summary of Contents for Mouser IB970

  • Page 1 IB970 ® 3rd Gen. Intel Core i7/i5 + B75 PCH Full Size CPU Card USER’S MANUAL Version 1.0...
  • Page 2 Intel and Intel® Sandy Bridge DC/QC Processor are registered trademarks of Intel Corporation. Microsoft Windows is a registered trademark of Microsoft Corporation. Winbond a registered trademark of Winbond Electronics Corporation. All other product names or trademarks are properties of their respective owners. IB970 User’s Manual...

  • Page 3: Table Of Contents

    Board Dimensions .............. 5 Installations ............6 Installing the CPU .............. 7 Installing the Memory............8 Setting the Jumpers............. 9 Connectors on IB970 ............14 BIOS Setup ............23 Drivers Installation ........49 Intel Chipset Software Installation Utility ......50 VGA Drivers Installation ..........53 Realtek HD Audio Driver Installation ......
  • Page 4 This page is intentionally left blank. IB970 User’s Manual...

  • Page 5: Introduction

    INTRODUCTION Introduction Product Description ® The IB970 PICMG 1.0 full size CPU Card is based on the latest Intel ® BD82B75 chipset. The platform supports 3rd Generation Intel Core i7/i5 in FCLGA1155 LGA1155 packing and features an integrated dual-channel DDR3 memory controller as well as a graphics core (4000).

  • Page 6: Checklist

    INTRODUCTION Checklist Your IB970 package should include the items listed below. • The IB970 Full-Size CPU Card • This User’s Manual • 1 CD containing chipset drivers and flash memory utility IB970 User’s Manual...

  • Page 7: Ib970 Specifications

    INTRODUCTION IB970 Specifications Product Name IB970F [with LVDS support] IB970 [w/o LVDS , w/oTPM] IB970RF [with LVDS support, Q77 on board] PICMG 1.0 Full size CPU card Form Factor ® CPU Type Generation Intel Core i7/i5 DT processor - FCLGA1155 package [37.5 mm x 37.5mm] - TDP: QC= 77W/65W/45W/35W 2.3GHz ~ 3.4GHz (TDP=45W~77W)
  • Page 8 Connector 1x 4 pins box header x 1 for LCD brightness control (IB970F/RF only) 2x13 pins box-header x1 for Printer (IB970 only) DF11-20 pins box-header x1 for COM1/2 DF11-20 pins box-header x1 for COM3/4 2x4 pins pin-header x 2 for USB 2.0 #1-4 2x6 pins pin-header x1 for Audio (Line-Out, Line-In &...

  • Page 9: Board Dimensions

    INTRODUCTION Board Dimensions IB970 User’s Manual...

  • Page 10: Installations

    INSTALLATIONS Installations This section provides information on how to use the jumpers and connectors on the IB970 in order to set up a workable system. The topics covered are: Installing the CPU................7 Installing the Memory ................8 Setting the Jumpers................9 Connectors on IB970 .................

  • Page 11: Installing The Cpu

    INSTALLATIONS Installing the CPU The IB970 board supports an LGA1155 Socket (shown below) for Intel Sandy Bridge processors. To install the CPU, unlock first the socket by pressing the lever sideways, then lift it up to a 90-degree. Then, position the CPU above the socket such that the CPU corner aligns with the gold triangle matching the socket corner with a small triangle.

  • Page 12: Installing The Memory

    INSTALLATIONS Installing the Memory The IB970 board supports two DDR3 memory socket for a maximum total memory of 8GB in DDR3 DIMM memory type. Installing and Removing Memory Modules To install the DDR3 modules, locate the memory slot on the board and perform the following steps: 1.

  • Page 13: Setting The Jumpers

    INSTALLATIONS Setting the Jumpers Jumpers are used on IB970 to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on IB970 and their respective functions.

  • Page 14: Jumper Locations On Ib970

    INSTALLATIONS Jumper Locations on IB970 IB970 User’s Manual...

  • Page 15: Jp1: Com1 Rs232 Ri/+5V/+12V Power Setting

    +12V Short/Closed Pin 3-4 Short/Closed Pin 3-5 Short/Closed JP3: Power On Type Function ATX Mode Open (Default) Close AT Mode JP8: Flash Descriptor Security Override (Factory use only) Flash Descriptor Security Override Disabled Open (Default) Close Enabled IB970 User’s Manual...

  • Page 16: Jp11: Lvds Panel Power Selection

    Pin 1-2 +3.3V Short/Closed Pin 3-4 Short/Closed Pin 5-6 +12V(Default) Short/Closed JP15: BL_ADJ_LEVEL Setting JP15 Function Open 3.3V Close 5V (default) JBAT1: Clear CMOS Contents JBAT1 Setting Function Pin 1-2 Normal Short/Closed Pin 2-3 Clear CMOS Short/Closed IB970 User’s Manual...

  • Page 17: Sw1: Lvds Panel Type Setting

    1280*768 18bit 1ch 1280*800 18bit 1ch 1280*960 18bit 1ch 1280*1024 24bit 2ch 1366*768 18bit 1ch 1366*768 24bit 1ch 1440*900 24bit 2ch 1440*1050 24bit 2ch 1600*900 24bit 2ch 1680*1050 24bit 2ch 1600*1200 24bit 2ch 1920*1080 24bit 2ch 1920*1200 24bit 2ch IB970 User’s Manual...

  • Page 18: Connectors On Ib970

    INSTALLATIONS Connectors on IB970 Connector Locations on IB970 ............15 CN1, CN3, CN4, CN5, CN6: SATA2 Connectors ......16 CN2: SATA3 Connectors ..............16 CN7: DB-15 VGA Connector ............16 CN8: USB3 Connector ..............16 CN9: USB2.0 Connector ..............16 CN10: Gigabit LAN (Intel 82579V)...........

  • Page 19: Connector Locations On Ib970

    INSTALLATIONS Connector Locations on IB970 IB970 User’s Manual...

  • Page 20: Cn1, Cn3, Cn4, Cn5, Cn6: Sata2 Connectors

    CN8: USB3 Connector Signal Name Pin # Pin # Signal Name P1_SSRX- P1_SSRX+ P2_SSRX- P2_SSRX+ P1_SSTX- P1_SSTX+ P2_SSTX- P2_SSTX+ P1_U2_D- P1_U2_D+ P2_U2_D- P2_U2_D+ CN9: USB2.0 Connector CN10: Gigabit LAN (Intel 82579V) CN11: Gigabit LAN (Intel 82583V) CN12: USB3.0 Connector IB970 User’s Manual...

  • Page 21: Cn13: Lcd Backlight Connector

    RTS4 RXD4 CTS4 TXD4 DTR4 Ground J2: COM1, COM2 Serial Port (DF11 Connector) Signal Name Pin # Pin # Signal Name DSR1 DCD1 RTS1 RXD1 CTS1 TXD1 DTR1 Ground DSR2 DCD2 RTS2 RXD2 CTS2 TXD2 DTR2 Ground IB970 User’s Manual...

  • Page 22: J3: Front Panel Function Connector

    JD MIC1 Ground J8: ATX 12V Power Connector This connector supplies the CPU operating voltage. Pin # Signal Name Ground Ground +12V +12V J9: Digital I/O Signal Name Pin # Pin # Signal Name OUT3 OUT1 OUT2 OUT0 IB970 User’s Manual...

  • Page 23: J10: Pci Lan Wake Up Connector

    PD2, parallel data 2 Select PD3, parallel data 3 Ground PD4, parallel data 4 Ground PD5, parallel data 5 Ground PD6, parallel data 6 Ground PD7, parallel data 7 Ground ACK, acknowledge Ground Busy Ground Paper empty Ground Select Ground IB970 User’s Manual...

  • Page 24: J15, J16: Usb Connectors

    J22: MCU Flash Connector (factory use only) J24: Mini PCIE Connector CPU_FAN1: CPU Fan Power Connector Pin # Signal Name Ground +12V Rotation detection Control SYS_FAN1: System Fan1 Power Connector Pin # Signal Name Ground +12V Rotation detection IB970 User’s Manual...

  • Page 25: Ch1, Ch2: Lvds Connectors

    INSTALLATIONS CH1, CH2: LVDS Connectors Signal Name Pin # Pin # Signal Name ENABLE LCD_PWR CLK+ CLK- LD2+ LD2- LD3+ LD3- LCD_PWR LD1+ LD1- LD0+ LD0- IB970 User’s Manual...
  • Page 26 INSTALLATIONS This page is intentionally left blank. IB970 User’s Manual...

  • Page 27: Bios Setup

    The topics covered in this chapter are as follows: BIOS Introduction ................24 BIOS Setup ..................24 Advanced Settings ................26 Chipset Settings ................. 37 Boot Settings ..................44 CSM parameters ................45 Security Settings ................46 Save & Exit Settings ................47 IB970 User’s Manual...

  • Page 28: Bios Introduction

    These defaults have been carefully chosen by both AMI and your system manufacturer to provide the absolute maximum performance and reliability. Changing the defaults could cause the system to become unstable and crash in some cases. IB970 User’s Manual...
  • Page 29 F3: Optimized Default F4: Save ESC: Exit System Language Choose the system default language. System Date Set the Date. Use Tab to switch between Data elements. System Time Set the Time. Use Tab to switch between Data elements. IB970 User’s Manual...

  • Page 30: Advanced Settings

    Disabled F4: Save ESC: Exit SERR# Generation Disabled ► PCI Express Settings Above 4G Decoding Enables or Disables 64bit capable devices to be decoded in above 4G address space (only if system supports 64 bit PCI decoding). IB970 User’s Manual...
  • Page 31 Keep Link ON Relaxed Ordering Enables or disables PCI Express Device Relaxed Ordering. Extended Tag If ENABLED allows device to use 8-bit Tag field as a requester. No Snoop Enables or disables PCI Express Device No Snoop option. IB970 User’s Manual...
  • Page 32 Defines number of Microseconds software will wait before polling ‘Link Training’ bit in Link Status register. Value range from 10 to 1000 uS. Unpopulated Links In order to save power, software will disable unpopulated PCI Express links, if this option set to ‘Disable Link’. IB970 User’s Manual...
  • Page 33 OS. ACPI Sleep State Select ACPI sleep state the system will enter, when the SUSPEND button is pressed. Lock Legacy Resources Enabled or Disabled Lock of Legacy Resources. S3 Video Repost Enable or disable S3 Video Repost. IB970 User’s Manual...
  • Page 34 TPM support. O.S. will not show TPM. Reset of platform is required. Security Device Support Enables or disables BIOS support for security device. O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not be available. IB970 User’s Manual...
  • Page 35 Disabled for Windows XP. Execute Disable Bit XD can prevent certain classes of malicious buffer overflow attacks when combined with a supporting OS (Windows Server 2003 SP1, Windows XP SP2, SuSE Linux 9.2, Re33dHat Enterprise 3 Update 3.) IB970 User’s Manual...
  • Page 36 Empty Software Preserve Unknown F4: Save ESC: Exit SATA Port4 Empty Software Preserve Unknown SATA Port5 Empty Software Preserve Unknown SATA Controller(s) Enable / Disable Serial ATA Controller. SATA Mode Selection (1) IDE Mode. (2) AHCI Mode. IB970 User’s Manual...
  • Page 37 Change Field F1: General Help F2: Previous Values F3: Optimized Default F4: Save ESC: Exit ISmart Controller Setup the power on time for the system. Schedule Slot 1 / 2 Setup the hour/minute for system power on. IB970 User’s Manual...
  • Page 38 DISABLE option will keep USB devices available only for EFI applications. USB3.0 Support Enable/Disable USB3.0 (XHCI) Controller support. XHCI Hand-off This is a workaround for OSes without XHCI hand-off support. The XHCI ownership change should be claimed by XHCI driver. IB970 User’s Manual...
  • Page 39 F2: Previous Values ► Parallel Port Configuration F3: Optimized Default F4: Save ESC: Exit Serial Port Configuration Set Parameters of Serial Ports. User can Enable/Disable the serial port and Select an optimal settings for the Super IO Device. IB970 User’s Manual...
  • Page 40 PC health status. Fan1/Fan2 Smart Fan Control This field enables or disables the smart fan feature. At a certain temperature, the fan starts turning. Once the temperature drops to a certain level, it stops turning again. IB970 User’s Manual...

  • Page 41: Chipset Settings

    Boot Security Save & Exit ► PCH-IO Configuration → ← ► System Agent (SA) Configuration Select Screen ↑↓ Select Item Enter: Select Change Field F1: General Help F2: Previous Values F3: Optimized Default F4: Save ESC: Exit IB970 User’s Manual...
  • Page 42 F4: Save ESC: Exit PCH LAN Controller Enable or disable onboard NIC. Wake on LAN Enable or disable integrated LAN to wake the system. (The Wake On LAN cannot be disabled if ME is on at Sx state.) IB970 User’s Manual...
  • Page 43 Enable or disable PCI Express Clock Gating for each root port. DMI Link ASPM Control The control of Active State Power Management on both NB side and SB side of the DMI link. PCIe-USB Glitch W/A PCIe-USB Glitch W/A for bad USB device(s) connected behind PCIE/PEG port. IB970 User’s Manual...
  • Page 44 Enable or disable xHCI Maximum Primary Stream Array Size. EHCI1/2 Control the USAB EHCI (USB 2.0) functions. One EHCI controller must always be enabled. USB Ports Per-Port Disable Control Control each of the USB ports (0~13) disabling. IB970 User’s Manual...
  • Page 45 F3: Optimized Default ► Memory Configuration F4: Save ESC: Exit VT-d Check to enable VT-d function on MCH. Enable NB CRID Enable or disable NB CRID WorkAround. C-State Pre-Wake Controls C-State Pre-Wake feature for ARAT, in SSKPD[57]. IB970 User’s Manual...
  • Page 46 Select the Video Device that will be activated during POST. This has no effect if external graphics present. Secondary booty display selection will appear based on your selection. VGA modes will be supported only on primary display. IB970 User’s Manual...
  • Page 47 CAS Latency (tCL) ↑↓ Select Item Minimum delay time Enter: Select CAS to RAS (tRCDmin) Change Field Row Precharge (tRPmin) F1: General Help Active to Precharge (tRASmin) F2: Previous Values F3: Optimized Default F4: Save ESC: Exit IB970 User’s Manual...

  • Page 48: Boot Settings

    UPON REQUEST – GA20 can be disabled using BIOS services. ALWAYS – do not allow disabling GA20; this option is useful when any RT code is executed above 1MB. Option ROM Messages Set display mode for Option ROM. Options are Force BIOS and Keep Current. IB970 User’s Manual...

  • Page 49: Csm Parameters

    Controls the execution of UEFI and Legacy Storage OpROM. Launch Video OpROM policy Controls the execution of UEFI and Legacy Video OpROM. Other PCI device ROM priority For PCI devices other than Network, Mass storage or Video defines which OpROM to launch. IB970 User’s Manual...

  • Page 50: Security Settings

    The password length must be F1: General Help in the following range: F2: Previous Values Minimum length F3: Optimized Default Maximum length F4: Save ESC: Exit Administrator Password User Password Administrator Password Set Setup Administrator Password. User Password Set User Password. IB970 User’s Manual...

  • Page 51: Save & Exit Settings

    Discard Changes done so far to any of the setup options. Restore Defaults Restore/Load Defaults values for all the setup options. Save as User Defaults Save the changes done so far as User Defaults. Restore User Defaults Restore the User Defaults to all the setup options. IB970 User’s Manual...
  • Page 52 BIOS SETUP This page is intentionally left blank. IB970 User’s Manual...

  • Page 53: Drivers Installation

    LAN Drivers Installation ..............58 Intel® Management Engine Interface ..........62 Intel® USB 3.0 Drivers ..............65 IMPORTANT NOTE: After installing your Windows operating system, you must install first the Intel Chipset Software Installation Utility before proceeding with the drivers installation. IB970 User’s Manual...

  • Page 54: Intel Chipset Software Installation Utility

    Plug & Play INF support for Intel chipset components. Follow the instructions below to complete the installation. 1. Insert the CD that comes with the board. Click Intel and then Intel(R) 7 Series Chipset Drivers. 2. Click Intel(R) Chipset Software Installation Utility. IB970 User’s Manual...
  • Page 55 DRIVERS INSTALLATION 3. When the Welcome screen to the Intel® Chipset Device Software appears, click Next to continue. 4. Click Yes to accept the software license agreement and proceed with the installation process. IB970 User’s Manual...
  • Page 56 DRIVER INSTALLATION 5. On the Readme File Information screen, click Next to continue the installation. 6. The Setup process is now complete. Click Finish to restart the computer and for changes to take effect. IB970 User’s Manual...

  • Page 57: Vga Drivers Installation

    Driver, the Microsoft .NET Framework 3.5 SPI should be first installed. To install the VGA drivers, follow the steps below. 1. Insert the CD that comes with the board. Click Intel and then Intel(R) Q7 Series Chipset Drivers. 2. Click Intel(R) Q77 Chipset Family Graphics Driver. IB970 User’s Manual...
  • Page 58 DRIVER INSTALLATION 3. When the Welcome screen appears, click Next to continue. 4. Click Yes to to agree with the license agreement and continue the installation. IB970 User’s Manual...
  • Page 59 5. On the Readme File Information screen, click Next to continue the installation of the Intel® Graphics Media Accelerator Driver. 6. On Setup Progress screen, click Next to continue. 7. Setup complete. Click Finish to restart the computer and for changes to take effect. IB970 User’s Manual...

  • Page 60: Realtek Hd Audio Driver Installation

    Realtek HD Audio Driver Installation Follow the steps below to install the Realtek HD Audio Drivers. 1. Insert the CD that comes with the board. Click Intel and then Intel(R) Q7 Series Chipset Drivers. 2. Click Realtek High Definition Audio Driver. IB970 User’s Manual...
  • Page 61 DRIVERS INSTALLATION 3. On the Welcome to the InstallShield Wizard screen, click Next to proceed with and complete the installation process. 4. The InstallShield Wizard Complete. Click Finish to restart the computer and for changes to take effect. IB970 User’s Manual...

  • Page 62: Lan Drivers Installation

    DRIVER INSTALLATION LAN Drivers Installation 1. Insert the CD that comes with the board. Click Intel and then Intel(R) Q7 Series Chipset Drivers. 2. Click Intel(R) PRO LAN Network Driver. IB970 User’s Manual...
  • Page 63 DRIVERS INSTALLATION 3. Click Install Drivers and Software. 4. When the Welcome screen appears, click Next. IB970 User’s Manual...
  • Page 64 DRIVER INSTALLATION 5. Click Next to to agree with the license agreement. 6. Click the checkbox for Drivers in the Setup Options screen to select it and click Next to continue. IB970 User’s Manual...
  • Page 65 DRIVERS INSTALLATION 7. The wizard is ready to begin installation. Click Install to begin the installation. 8. When InstallShield Wizard is complete, click Finish. IB970 User’s Manual...

  • Page 66: Intel® Management Engine Interface

    DRIVER INSTALLATION Intel® Management Engine Interface Follow the steps below to install the Intel Management Engine. 1. Insert the CD that comes with the board. Click Intel and then Intel(R) AMT 8.0 Drivers. IB970 User’s Manual...
  • Page 67 DRIVERS INSTALLATION 2. When the Welcome screen to the InstallShield Wizard for Intel® Management Engine Components, click the checkbox for Install Intel® Control Center & click Next. 3. Click Yes to to agree with the license agreement. IB970 User’s Manual...
  • Page 68 DRIVER INSTALLATION 4. When the Setup Progress screen appears, click Next. Then, click Finish when the setup progress has been successfully installed. IB970 User’s Manual...

  • Page 69: Intel® Usb 3.0 Drivers

    DRIVERS INSTALLATION Intel® USB 3.0 Drivers 1. Insert the CD that comes with the board. Click Intel and then Intel(R) Q7 Series Chipset Drivers. 2. Click Intel(R) USB 3.0 Drivers. IB970 User’s Manual...
  • Page 70 DRIVER INSTALLATION 3. When the Welcome screen to the InstallShield Wizard for Intel® USB 3.0 eXtensible Host Controller Driver, click Next. 4. Click Yes to to agree with the license agreement and continue the installation. IB970 User’s Manual...
  • Page 71 5. On the Readme File Information screen, click Next to continue the installation of the Intel® USB 3.0 eXtensible Host Controller Driver. 6. Setup complete. Click Finish to restart the computer and for changes to take effect. IB970 User’s Manual...
  • Page 72 DRIVER INSTALLATION This page is intentionally left blank. IB970 User’s Manual...

  • Page 73: Appendix

    0F0h Clear Math Coprocessor Busy Signal 0F1h Reset Math Coprocessor 1F0h - 1F7h IDE Interface 2F8h - 2FFh Serial Port #2(COM2) 2B0h- 2DFh Graphics adapter Controller 360h - 36Fh Network Ports 3F8h - 3FFh Serial Port #1(COM1) IB970 User’s Manual...

  • Page 74: Interrupt Request Lines (Irq)

    The following table shows the IRQ used by the devices on board. Level Function IRQ0 System Timer Output IRQ1 Keyboard IRQ3 Serial Port #2 IRQ4 Serial Port #1 IRQ8 Real Time Clock IRQ14 Primary IDE IRQ15 Secondary IDE IB970 User’s Manual...

  • Page 75: Watchdog Timer Configuration

    Fintek 81866, program abort.\n"); return(1); }//if (SIO == 0) if (argc != 2) printf(" Parameter incorrect!!\n"); return (1); bTime = strtol (argv[1], endptr, 10); printf("System will reset after %d seconds\n", bTime); if (bTime) EnableWDT(bTime); } else DisableWDT(); return 0; IB970 User’s Manual...
  • Page 76 //--------------------------------------------------------------------------- void DisableWDT(void) unsigned char bBuf; Set_F81866_LD(0x07); //switch to logic device 7 bBuf = Get_F81866_Reg(0xFA); bBuf &= ~0x01; Set_F81866_Reg(0xFA, bBuf); //disable WDTO output bBuf = Get_F81866_Reg(0xF5); bBuf &= ~0x20; bBuf |= 0x40; Set_F81866_Reg(0xF5, bBuf); //disable WDT //--------------------------------------------------------------------------- IB970 User’s Manual...
  • Page 77 F81866_UNLOCK); outportb(F81866_INDEX_PORT, F81866_UNLOCK); //--------------------------------------------------------------------------- void Lock_F81866 (void) outportb(F81866_INDEX_PORT, F81866_LOCK); //--------------------------------------------------------------------------- void Set_F81866_LD( unsigned char LD) Unlock_F81866(); outportb(F81866_INDEX_PORT, F81866_REG_LD); outportb(F81866_DATA_PORT, LD); Lock_F81866(); //--------------------------------------------------------------------------- void Set_F81866_Reg( unsigned char REG, unsigned char DATA) Unlock_F81866(); outportb(F81866_INDEX_PORT, REG); outportb(F81866_DATA_PORT, DATA); Lock_F81866(); //--------------------------------------------------------------------------- IB970 User’s Manual...
  • Page 78 (F81866_BASE) #define F81866_DATA_PORT (F81866_BASE+1) //--------------------------------------------------------------------------- #define F81866_REG_LD 0x07 //--------------------------------------------------------------------------- #define F81866_UNLOCK 0x87 #define F81866_LOCK 0xAA //--------------------------------------------------------------------------- unsigned int Init_F81866(void); void Set_F81866_LD( unsigned char); void Set_F81866_Reg( unsigned char, unsigned char); unsigned char Get_F81866_Reg( unsigned char); //--------------------------------------------------------------------------- #endif //__F81866_H IB970 User’s Manual...
  • Page 79 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: IBASE SBC-IB970 SBC-IB970F SBC-IB970RF IB970RF...

Table of Contents