Machineart ADVance GUARD Installation Manual

TOOLS REQUIRED:
May vary according to model
T25 Torx Driver
T30 Torx Driver
T45 Torx Driver
T55 Torx Driver
6MM Hex Driver
GUARD KIT
Sets may come pre-assembled
1_INSERT - x2
2_GUARD - x2
3_GUARD SHIELDS - x2
(1-LEFT / 1-RIGHT)
4_RETAINING WASHERS - x6
5_THUMBSCREWS - x6
FITMENT KIT
KIT-1
FITS:
2013+ BMW R1200 GS/A_LC
2015+ BMW S1000 XR
MOUNT x2
Adjustable-Short
BAR ADAPTER x2
Taper Bar
MOUNT SCREW x4
BAR CAP x2
BAR END SCREW
Reuse Stock Screw
FITS:
Triumph Tiger XC, XR
MOUNT x2
Adjustable-Long
BAR ADAPTER x2
Taper Bar
MOUNT SCREW x4
BAR CAP x2
BAR SPACER x2
M6 WASHER x2
BAR END SCREW x2
M6 x 40
P1
GUARD
*
IMPORTANT:
*
BEFORE BEGINNING WORK,
READ THESE INSTRUCTIONS
FROM START TO FINISH.
*
PLACE BIKE ON CENTER
STAND ON LEVEL GROUND.
1
2
NOTES: Contents are model specific.
Certain included parts may not
be needed for your application.
FITS:
all years BMW F800GS/A
all years BMW F650/700GS
MOUNT x2
Adjustable-Long
BAR ADAPTER x2
F800 Taper Bar
BAR ADAPTER x4
F650/700 7/8" Bar
MOUNT SCREW x4
BAR CAP x2
M8 WASHER x2
BAR END SCREW x2
Installation Guide
*
These instructions are written based upon our current
state of knowledge. Information is subject to modification.
Due to motorcycle manufacturing tolerance variations
from the factory, or due to owner made alterations, each
installation is subject to modification to ensure proper fit.
X1
4
3
Contents may be revised periodically
reflecting changes made by Original
Equipment Manufacturers.
KIT-2
FITS:
2005~2012 BMW R1200 GS
2013 BMW R1200 GSA
BAR END SCREW x2
M8 x 45
We assume no liability for direct or consequential damage
to the vehicle or personal injury caused by a fall, accident,
V1-C 2017
5
KIT-3
FITS:
Most ADV models: Honda, KTM,
Suzuki, Kawasaki, Yamaha
MOUNT x2
Fixed
BAR ADAPTER x2
Taper Bar
MOUNT SCREW x4
M12 x 90
BAR CAP
Reuse Stock Cap
Installation requires technical experience.
Machineart Moto products should be installed by
a qualified motorcycle technician. Improper installation
or incorrect installation of our products.
MOUNT x2
Pivot Tip
BAR ADAPTER x2
Taper Bar
BAR ADAPTER x4
7/8" Bar
MOUNT SCREW x4
BAR CAP x2
M8 WASHER x2
BAR END SCREW x2
M8 x 60
*
IMPORTANT:
may cause injury or death.