Whale Intelligent Control i Van Quick Manual page 5

SET UP AND OPTIONS
SETTING YOUR CLOCK
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To set the clock:
Press and hold the Home button
to access 'Set up and Options'
Press
Use and
Use and
SETTING YOUR ROOM AND WATER HEATER TIMERS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Set up to 6 timers (3 per heating device)
Press and hold the Home button
Then press
Use the and
Use the and
across to set energy source, on/off time, as well as the
desired temperature.
For Room Heater only
Please note that water temperature is pre-set by Whale and cannot be adjusted.
To activate timers
Press to return to the home screen, then press
The Timer icon will have a yellow frame to
show that the timers have been enabled.
The Timer icon will turn green to show that
the timers have been activated.
to adjust the hour
to adjust the minutes
OR
keys to adjust the heat setting.
buttons to move the cursor
and can be used to adjust the temperature.
When a timer is set
and active, a timer
icon will appear top
right of the icon.
Timer
in use