Page 7
Please take away all the packing and protecting material before assemble. Assemble wheels (No13.14) and the cylinder holder (No17). ( A)
Page 9
Loosen the screws which secure the side burner with Philips head screwdriver and take it out. Assemble the side valve, meanwhile put the knob seat on front panel and tighten the two screws together with knob seat and side valve. M4X8...
Page 10
Put back side burner and tighten the screws, meanwhile put the side burner inlet into side valve injector. Make sure side burner inlet put into side valve injector.
Need help?
Do you have a question about the CB4-SBC001-D and is the answer not in the manual?
Questions and answers