CLIO 3801 Owner's Manual

Owner's Manual
Model 3801
Version 09.04.13
PLEASE READ ALL INSTRUCTIONS AND SAFETY PRECAUTIONS BEFORE USING THIS
SHAVER.
WARNINGS:
This device is not a toy and is not intended for use by or on children.
The shaver is intended for household use only.
Do not use the shaver if it has a damaged or broken foil, blade or cutting unit, as injury may
occur.
Do not expose the shaver to direct sunlight, extreme temperatures or heated surfaces.
BATTERIES:
Your shaver requires 2 'AAA' 1.5 volt alkaline batteries. Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
• Remove the battery compartment cover located on the bottom of the shaver by twisting the
clasp in the direction of the arrows indicated on the battery door (Fig.1).
• Insert the batteries as shown on the indicator labels visible inside of each battery
compartment (Fig. 2).
• Line up the dash (-) lines on both the battery door and the shaver. Push the battery
compartment cover back onto the shaver so that it is inserted all of the way and then turn the
clasp back to its original position to secure the battery door in place. NOTE: the battery
compartment cover will only fit in one direction.
THE SHAVER WILL NOT OPERATE IF THE BATTERIES ARE IMPROPERLY INSTALLED
Fig. 1
Owner's Manual
Model 3801
Version 09.04.13
PLEASE READ ALL INSTRUCTIONS AND SAFETY PRECAUTIONS BEFORE USING THIS
SHAVER.
WARNINGS:
This device is not a toy and is not intended for use by or on children.
The shaver is intended for household use only.
Do not use the shaver if it has a damaged or broken foil, blade or cutting unit, as injury may
occur.
Do not expose the shaver to direct sunlight, extreme temperatures or heated surfaces.
BATTERIES:
Your shaver requires 2 'AAA' 1.5 volt alkaline batteries. Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
• Remove the battery compartment cover located on the bottom of the shaver by twisting the
clasp in the direction of the arrows indicated on the battery door (Fig.1).
• Insert the batteries as shown on the indicator labels visible inside of each battery
compartment (Fig. 2).
• Line up the dash (-) lines on both the battery door and the shaver. Push the battery
compartment cover back onto the shaver so that it is inserted all of the way and then turn the
clasp back to its original position to secure the battery door in place. NOTE: the battery
compartment cover will only fit in one direction.
THE SHAVER WILL NOT OPERATE IF THE BATTERIES ARE IMPROPERLY INSTALLED
Fig. 2
Fig. 1 Fig. 2