Related Manuals for soloprotect ID
Summary of Contents for soloprotect ID
- Page 1 Quick Start Guide...
- Page 2 Keeps the SoloProtect ID battery fully charged. How to use: Insert the SoloProtect ID charger lead into the indicated Micro USB socket. The battery symbol and LED will start to flash. When fully charged the battery symbol will show full and the LED will display a constant green light.
-
Page 3: Turning On/Off
How to use: Press highlighted buttons simultaneously until you feel a vibration. On – You will feel one vibration and the SoloProtect ID will then go through a symbol, light, vibrate and tone sequence. Off – You will feel two vibrations. -
Page 4: Device Check
Once complete, the device will obtain a Geolocation fix denoted by a symbol on the display, and blue, flashing LEDs. See section 8 for more information. • Do not rely on SoloProtect ID if either battery or signal displays red. Quick Start... - Page 5 Amber Alert Function: Use ‘Amber Alert’ to pre-record details of your location and/or to initiate an amber timer*. How to use: Press the highlighted button until you feel three short vibrations. When the LED lights and display starts to flash, you should commence recording.
-
Page 6: Red Alert
Red Alert Function: Use ‘Red Alert’ any time you feel your personal safety is being compromised*. How to use: Press the highlighted button for two seconds until you feel three short vibrations and the alert symbol is shown. This will mean the ‘Red Alert’ has been activated and the call is connected. - Page 7 Incapacitation Alarm Function: Incapacitation detection is used to raise an alert if you have fallen or collapsed* - SoloProtect ID’s two-way audio allows an operator to talk directly to a user. How to use: SoloProtect ID will detect an Incapacitation scenario and go through a pre-alert phase.
- Page 8 How to use: If SoloProtect ID is forcefully pulled from the user the device will go into ‘Red Alert’. • Alternatively if you do not want to be discreet in raising a ‘Red Alert’, you can manually pull the pin out of the device.
- Page 9 Geolocation (via GNSS) Function: In conjunction with ‘Device Check’, use to update your location. How to use: After completing a 'Device Check' the LED will flash blue and show a Geolocation display symbol, before going solid blue with a short vibration when a fix is found –...
-
Page 10: Multi-Function Buttons
Multi-Function Buttons Function: Each button can be defined to make an audio call or to trigger an SMS text message to a pre-defined contact*. How to use: Press one of the highlighted buttons, specific to each contact to call or trigger an SMS text*. - Page 11 • Keep your SoloProtect ID clean and avoid unnecessary knocks or drops. • SoloProtect ID is not waterproof; avoid exposure to rain or other wet conditions. • If you wear your SoloProtect ID on a lanyard, remember to check the lanyard plug regularly and replace it whenever it becomes damaged.
- Page 12 WE MAKE WORKING ALONE SAFER Tel: 0114 399 6000 (Option 4) info@SoloProtect.com www.SoloProtect.com...
Need help?
Do you have a question about the ID and is the answer not in the manual?
Questions and answers