Sony Handycam HDR-CX130 Handbook page 85

The menu settings have been changed
automatically.
While Intelligent Auto is active, some menu

settings related to image quality will be
changed automatically.
The following menu items return to the

default settings when you switch between
movie recording and photo recording and
playback modes.
[ Fader]

[ Self-Timer]

[Tele Macro]

Your camcorder gets warm.
Your camcorder may become warm during

operation. This is not a malfunction.
A rattling noise can be heard when you
shake the camcorder.
If no noise is heard when the camcorder is

turned on and is in the movie/photo recording
mode, the noise is produced by the movement
of the internal lens. This is not a malfunction.
Intelligent Auto is canceled.
The Intelligent Auto setting is canceled if you

change the following settings:
[Smth Slw REC]

[Golf Shot]

[White Balance]

[Spot Meter/Fcs]

[Spot Meter]

[Spot Focus]

[Exposure]

[Focus]

[Low Lux]

[Scene Selection]

[Tele Macro]

[ SteadyShot]

[ SteadyShot]

[Auto Back Light]

[Face Detection]

Batteries/power sources
The power abruptly turns off.
Use the AC Adaptor.

In the default setting, when about 5 minutes

have elapsed while you do not operate your
camcorder, the camcorder is automatically
turned off (A. Shut Off). Change the setting
of [A. Shut Off] (p. 82), or turn on the power
again.
Charge the battery pack (p. 13).

The CHG (charge) lamp does not light
while the battery pack is being charged.
Close the LCD screen (p. 13).

Attach the battery pack to the camcorder

correctly (p. 13).
Connect the power cord (mains lead) to the

wall outlet (wall socket) properly.
The battery charge is completed (p. 13).

The CHG (charge) lamp flashes while the
battery pack is being charged.
If the temperature of the battery pack is too

high or too low, you may not be able to charge
it (p. 97).
Attach the battery pack to the camcorder

correctly (p. 13). If the problem persists,
disconnect the AC Adaptor from the wall
outlet (wall socket) and contact your Sony
dealer. The battery pack may be damaged.
The remaining battery time indicator does
not indicate the correct time.
The ambient temperature is too high or too

low. This is not a malfunction.
The battery pack has not been charged

enough. Fully charge the battery again. If the
problem persists, replace the battery pack with
a new one (p. 98).
The indicated time may not be correct

depending on the environment of use.
US