PrimeScales PS-C30KS-3KG User Manual
  1. Manuals
  2. Brands
  3. PrimeScales Manuals
  4. Scales
  5. PS-C30KS-3KG
  6. User manual

PrimeScales PS-C30KS-3KG User Manual

Counting scales
Hide thumbs

Advertisement

Table of Contents

PS-C30KS series
Counting Scales
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PS-C30KS-3KG and is the answer not in the manual?

Questions and answers

Summary of Contents for PrimeScales PS-C30KS-3KG

  • Page 1 PS-C30KS series Counting Scales User Manual...

  • Page 2: Section 1 Introduction

    All units include automatic zero tracking, audible alarm for pre-set weights, automatic tare, pre-set tare and an accumulation facility that allows the count to be stored and recalled as an accumulated total. SECTION 2 SPECIFICATIONS 2.1 QHC plus series QHC SERIES PS-C30KS-3KG PS-C30KS-6KG PS-C30KS-15KG PS-C30KS-30KG Model # 15kg 30kg Maximum Capacity 0.1g 0.2g...

  • Page 3: Section 3 Installation

    SECTION 3 INSTALLATION 3.1 GENERAL INSTALLATION The scales should be placed in a location that will not degrade the accuracy. Avoid extremes of temperature. Do not place in direct sunlight or near air conditioning vents. Avoid unsuitable surfaces. The table or floor must be rigid and not vibrate. Do not place near vibrating machinery.

  • Page 4: Section 5 Displays

    SECTION 5 DISPLAYS 5.1 Display map The scales have three digital displays. The displays show WEIGHT, UNIT WEIGHT And QUANTITY. 5.2 Weight Display This display indicates the weight on the scale. 5.3 Unit Weight Display This display indicates the unit weight of a sample. This value is either entered by the user or computed by the scale.

  • Page 5: Section 7 Parts Counting

    SECTION 7 PARTS COUNTING 7.1 The unit weight of Object is Unknown Place a sample quantity of items on the scale. Enter the sample size then press the [SPML] key. Once the scale stabilizes, the count is shown on the quantity display and enters counting mode automatically.

  • Page 6: Section 9 Checkweighing Setting

    SECTION 9 CHECKWEIGHING SETTING In the weighing mode, press [QTY PST] key to enter checkweighing setting. The left window will show LIMOF and the middle window will show Count or Weight, which allows you to select the checkweighing based on Count or Weight. Switch the Count or Weight by pressing [M+] key then press [QTY PST] key to move on.

  • Page 7: Section 11 Calibration

    Switch between ON or OFF by pressing [M+] key then press [MC] key to move on. The next parameter is PTE, which means if you allow the scale to set the pre-tare function with the load on the scale. Please refer to Section 7 for how to use this function. Switch between ON or OFF by pressing [M+] key then press [MC] key to move on.

This manual is also suitable for:

Ps-c30ks-6kgPs-c30ks-30kgPs-c30ks seriesPs-c30ks-15kg

Table of Contents

Save PDF