Advertisement

Available languages

Available languages

Please read and follow all of the instructions & safety precautions detailed below prior to using this
product. Failure to do so may result in serious personal injury and / or property damage.
Read all the instructions before using the product.
Power bank main unit contains an internal lithium ion battery. Upon initial use or after a prolonged
storage period, fully charge it once. The unit's full performance is achieved only after 2 or 3
completed charge and discharge cycles.
Power banks are not allowed in checked luggage on commercial airline flights. Handle with care
and dispose of in accordance to local regulations. Carry-on only.
To reduce the risk of injury, close supervision is necessary when the product is used near
children.
Do not put fingers or hands into the product.
Do not expose power bank to rain, snow, water or liquids.
Use of a power supply or charger not recommended or sold with power bank manufacturer may
result in a risk of fire or injury to persons.
Do not use the power bank in excess of its output rating. Overload outputs above rating may
result in a risk of fire or injury to persons.
Do not use the power bank that is damaged or modified. Damaged or modified batteries may
exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
Do not disassemble the power bank. Bring unit to a qualified service person when service or
repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
Do not expose a power pack to fire or excessive temperature. Exposure to fire or temperature
above 100°C may cause explosion. The temperature of 100°C is equivalent to the temperature of
212°F.
Have servicing performed by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the product is maintained.
Do not charge an electronic device while the power bank unit is being charged.
Disconnect charging cable from the power bank when not in use
The T1036 is a UL 2056 Certified 4,400 mAh rubberized power bank. Please see below product
specifications & user guide.

T1036 Specifications

1. Item No.: T1036
2. Model: SP8186
3. Battery Type: UL Certified lithium Ion battery
4. Battery Duration/Lifespan: 500 times

WARNING

T1036 USER MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the T1036 and is the answer not in the manual?

Questions and answers

Summary of Contents for Spectech T1036

  • Page 1  Disconnect charging cable from the power bank when not in use T1036 USER MANUAL The T1036 is a UL 2056 Certified 4,400 mAh rubberized power bank. Please see below product specifications & user guide. T1036 Specifications 1. Item No.: T1036 2.
  • Page 2 LED indicator To Recharge T1036 1. Insert the micro USB output of the charging cable into the T1036 & connect USB output to a power supply (wall adapter with DC 5V output – not included). 2. Red LED lights will flash while charging & will remain solid red once power bank is fully charged.
  • Page 3 2. Turn the power bank ON (press power button once). 3. Blue LED lights will remain lit while your device is being charged (the T1036 will automatically power off once your device is fully charged) 4. To stop charging, double press the power button & disconnect the charging cable...
  • Page 4 Débrancher le câble de chargement du chargeur lorsqu’il n’est pas utilisé Manuel de l’utilisateur du T1036 Le T1036 est un chargeur UL 2056 certifié de 4400 mAh, à texture caoutchoutée. Ci-dessous les spécifications et le mode d’emploi du produit. Spécifications du T1036...
  • Page 5 Voyant LED Recharge du T1036 1. Insérer la sortie micro-USB du câble de chargement dans le T1036 et connecter la sortie USB à une source d’énergie (adaptateur de prise murale 5V CC – non inclus) 2. Les lumières LED rouges clignoteront pendant le chargement et demeureront rouge fixe une fois...
  • Page 6 électronique 2. Allumer le chargeur (appuyer sur le bouton d’allumage une fois) 3. Des LED bleues demeureront allumées pendant le chargement du dispositif (le T1036 s’éteindra automatiquement une fois le dispositif chargé) 4. Pour arrêter le chargement, appuyer deux fois sur le bouton d’allumage et débrancher le câble de chargement NOTE: si la LED est éteinte, le chargement s’est interrompu...
  • Page 7 Desconectar el cable de carga cuando no se usa. Manual del usuario del T1036 El T1036 es un cargador UL 2056 certificado, de 4,400 mAh, con textura de goma. A continuación las especificaciones y el modo de empleo del producto.
  • Page 8 Visor LED Recarga del T1036 1. Insertar la salida micro-USB del cable de carga en el T1036 y conectar la salida USB a una fuente de energía (adaptador de toma mural 5V CC – no incluido). 2. Las LED rojas parpadearán durante la carga y permanecerán en rojo fijo una vez terminada la carga.
  • Page 9 Dispositivos IOS: emplear el cable de carga incluido en el celular o dispositivo electrónico 2. Encender el cargador (oprimir el botón de encendido una vez) 3. LED azules permanecerán encendidas durante la carga del dispositivo (el T1036 se apagará automáticamente una vez cargado el dispositivo) 4.

This manual is also suitable for:

Sp8186

Table of Contents