Leftek M SERIES Quick Operation Manual
  1. Manuals
  2. Brands
  3. Leftek Manuals
  4. Security Camera
  5. M SERIES
  6. Quick operation manual

Leftek M SERIES Quick Operation Manual

High speed dome camera
Hide thumbs

Advertisement

Table of Contents

QUICK OPERATION GUIDE
M SERIES HIGH SPEED DOME CAMERA
Version：S2018V1

Advertisement

Table of Contents
loading

Summary of Contents for Leftek M SERIES

  • Page 1 QUICK OPERATION GUIDE M SERIES HIGH SPEED DOME CAMERA Version：S2018V1...
  • Page 2 Special Declaration Before connecting and using this product, please read these instructions carefully and keep it for references in the future. This manual might be not accurate technically or contains some minor type errors.The contents in this manual about production description and program might be updated without notice.

  • Page 3: Table Of Contents

    Contents Packing List..............03 2. Camera Specifications..........03 3. Installation Method............04 4. Link device..............05 5. Software tools............07 6. Web client access............08 7. Set the ptz camera preset..........10 8. PC client access............11 9. Mobile APP access.............13 10. NVR add camera............15 11. PTZ Camera Common Function Settings:....15 12.

  • Page 4: Packing List

    Packing List Quantity Part Name Camera 1 set 1 bag Screw 1 pcs Bracket Camera Specifications 5.0MP (3072 x 1728) 2MP(1920 x 1080) Video Quality f= 2.8~13.5mm, 5X Optical Motorized Zoom; Lens F=1.2; Viewing Angle 36°~100° Support SD card slot, NOT with built-in SD card SD card Microphone Operating Power...

  • Page 5: Installation Method

    Installation Method Step-1: Draw positioning holes Take out bracket from package box, place the wall mount bracket on the wall and mark down all 4 fixing holes Wall Mount Bracket Step-2: Drill holes and put expansion screws in. Drill 4pcs expansion screw’s installation holes at pre-marked position, then put 4pcs expansion screws in.

  • Page 6: Link Device

    Step-4: Fix the speed dome camera. Lead cable drawn out from the holder recess, then put the 4 installation hole of bracket of speed dome focus on the wall's 4pcs expansion screw and tighten that 4pcs nut. Then seal the appeared groove via glass glue.
  • Page 7 DC12V DC Connector Network Cable 4.2 Typical application connection diagram LAN Connection Network Network Cable Cable Router/Switcher Network Speed NVR /PC Dome Camera WAN Connection Network Network Cable Cable Router/Switcher Network Speed NVR/PC Dome Camera Router/Switcher Internet NVR/PC NVR /PC Router/Switcher -06-...

  • Page 8: Software Tools

    Software tools Scan the QR code of manual to download the user manual. Or go the the web: http://121.42.188.188:83/v2/M-I-S2018V1.pdf to download the document Scan the QR code on the screw bag or left QR code to download software and installation tool. Or go the the web:http://121.42.188.188:83/HS-LF.zip to download the software and installation tool.

  • Page 9: Web Client Access

    Web client access 6.1 The default IP of camera is 192.168.0.200, user name:admin, password: admin. when the web client-side access the ip Camera need to set the ip address to a same network segment, or use search tool to change the ip address of the device to same network segment on the laptop, can use the red column below to change the IP address of the camera.For example, if your computer ip address is 192.168.1.20 , then you need to change the camera ip...
  • Page 10 6.3 Open the IE browser, enter the IP address（factory default IP:192.168.0.200）of the camera then click Enter. The browser login screen appears, enter the "user name" (default admin)"password" (default admin) then click login. -09-...

  • Page 11: Set The Ptz Camera Preset

    6.4 View the ID of the mobile APP, Enter the set—Network—P2P Set the ptz camera preset Take IE interface for example: after you enter into the zoom camera page in the IE interface,click”PTZ control” on the left then will appear the direction key of controlling ptz, Figure:Operate the ptz run to the location where you want to set preset, then click the ptz function on the left, select the preset value you want to set, then click set to finish.

  • Page 12: Pc Client Access

    PC client access 8.1 Scan code to download the PC client(HCMS),install the file to your computer。 8.2 Open and log in the HCMS client software， Default account: admin password: admin 8.3 After enter the software, click Configuration Management - Device Management 8.4 In the device management page, click【device look-up】, the network setup of the local Area Network will appear below the 【device IP】,...
  • Page 13 2. Select the device you want to add 1. Search device IP 3. Click “add”button 8.5 In the main interface, click [Device List] - [Local Platform] – double click the IP address to request screen. 8.6 In the main interface of the client, open the【PTZ direction control】 to control the camera on the next, left, right, zoom +, zoom -, focus +, focus - and so on.

  • Page 14: Mobile App Access

    Mobile APP access 9.1 Installation and acquisition Android system / IOS system Search for keywords “Hisee” on Google Play / App Store to download and install.You can also download by the Android QR code (Picture 1) (Picture 2) (Picture 3) -13-...
  • Page 15 9.2 Register an APP account after installation well，enter the account and password to log in. (Picture 1) 9.3 Click the + sign on the middle, enter to the [add device interface]. And choose Wireless device. (Picture 2) 9.4 By scanning the QR code or inserting the ID manually in the page of device adding-in, inserting the ID number of the device, When default as scanning the code, please aim at the QR code (QR code is located in the device web customer ID 【setup】—【internet】—【P2P】) ,...

  • Page 16: Nvr Add Camera

    (Picture 4) (Picture 5) (Picture 6) NVR add camera 10.1 Make sure the NVR and the camera are within the same network segment. 10.2 Open the channel management on NVR, and, click [search device] or [custom add] button in the channel management 10.3 Select the IP address of the camera, click 【Add】...
  • Page 17 IR Lights Auto Mode- call preset 90 and then call preset 1 11.2 IR Lights Sensitivity Settings High IR Lights Sensitivity- call preset 90 and then call preset 11 Medium IR Lights Sensitivity- call preset 90 and then call preset 12 Low IR Lights Sensitivity- call preset 90 and then call preset 13 11.3 IR CUT Setting Turn on IR CUT- call preset 91 and then call preset 1...
  • Page 18 Note: All the network ptz camera support to call the number 35 preset and execute the patrol of 1-8 preset afart March, 2015.E.x we only set 1.2.3 this three presets, call preset 35, then the ptz camera will cruising among this presets. (Call preset 35 execute the patrol function correspond the first patrol,default stay time 10m, speed 50.
  • Page 19 Set AB line scan in arc- call preset 94, call preset 46 Set AB line scan out arc- call preset 94, call preset 47 11.7 Park Settings (1)Park Preset Settings For example, if you wan to set preset 1 as a park preset, then please call preset 94 and then preset 1;...

  • Page 20: Q&A

    Q&A Q：The camera can do self-test, but can not control after powered on. A：On the web client find setting—PTZ function—PTZ protocol—protocol （pelco-D）—Baud rate（2400）—Address(1), Change the protocol baud rate address to the default parameter。 ： Q When using search tool to modify the ip, it show " Network parameters setting is illegal "...
  • Page 21 ： A The new IP and gateway should be in the same segment. -20-...
  • Page 22 Q：The IP address is not found after powered on.And then PC client show”no VIDEIO” or WEB client show ”connection error”. A：The ip of camera may not be correct or the camera ip and the computer ip may not be in the same segment.You can use the tool IPWizardIII to search the real camera ip and set the ip address to a same network segment.

Table of Contents