RGB
When
COLOUR
switch is engaged, LED
illuminates with color programmed by
installed Colour module.
When
TWO-TONE
switch is engaged,
LED illuminates with color programmed
by installed Colour module.
FOCUS
switch activates the FOCUS
filter. When
FOCUS
switch is engaged,
LED illuminates.
PRE-C
switch moves the FOCUS filter
in front of the primary Colour slot. This
allows the user to toggle the routing
between Colour > EQ vs. EQ > Colour.
© 2018 LOUDER THAN LIFTOFF LLC. ALL RIGHTS RESERVED.
C-DRV
knob simultaneously controls
input gain of the primary Colour module,
and post-Colour attenuation to maintain
unity gain. When internal jumper J3 is
set to BOOST, DRV can be used to
provide 0 to +24 dB of gain.
C-MIX
knob controls intensity of
secondary Colour effect by blending
processed and dry signal. Turning the
knob clockwise mixes in more of the
Colour module's effect.
COLOUR
switch activates primary
analog plugin slot, when Colour module
1 is installed.
TWO-TONE
switch activates secondary
analog plugin slot, when Colour module
2 is installed.
FOCUS
is an intuitive filter that focuses
the energy in a source on the bass or
treble ranges of the sound. Turn towards
BASS to emphasize the low end. Turn
towards TREB to emphasize the mids
and highs. Apparent loudness of the
source is maintained constant for
meaningful A/B comparisons.