Advertisement
Installation Manual(
1. Open the packaging to check whether the product is in line with the requirements; the surface of the product is intact; The function of the product is in line
with the requirements.
2. Detailed installation Manual:
Manual for NUALIGHT LED Street Light
Manual for NUALIGHT LED Street Light
3. If nertical installation, pls adjust the lamp arm as below picture shows:
Requirement for lamp arm: This led street light is suitable for different lamp arm sizes(Φ42~Φ60)
Notes of the Installation & using
LED is widely used outdoor with poor working conditions, which keeps the strict requirements for its reliability. According to the failure analysis,
except for the factors from the lamp, good electricity ambient and correct installation have a great effect on the stability of the drive. Below are
the precautions for the installation and using:
1 Installation Instructions
1.1 There are 3 lines for AC input, which are L,N,G and please wire and power the lamp according to the product specifications.
1.2 Voltage fluctuations from the state grid should be within the voltage range of the lamp. There will be highlights on the Item NO.2 in "Power Systems"
below.
1.3 Please make sure that the lamp has a good connection with the ground line while installation.
1.4 Surge protective device is provided when buying the products from us, but lightning protection device is also needed while installation in case of the
damage caused by lightning.
1.5 The power cord of the LED street light is must be the special line, with no other mixed cords, especially the cords of the HPS or other high voltage
shock lamps.
1.6 Please don't expose the driver out of the lamp to reduce the damage caused by poor condition bad environment.
Advertisement
