Advertisement
Quick Links
Items included in bed flat pack are:
1 x Upholstered headboard panel
1 x footboard rail
4 x tall posts
1 x centre rail
(not included if you have ordered a single bed)
1 x set of sprung beech slats
(N.B. If you have ordered a 90cm or 180cm wide bed – you will receive a double slat system including sliders)
Fixings:
8 x threaded bolts
8 x nuts
16 x wooden dowels
4 x large silver bolts
1. Place the wooden dowels in the outer holes at the ends of the side rails, headboard and
footboard rails. Tap these in securely. Screw the 8 threaded bolts into the metal insert nuts
located on the four posts
DEVONSHIRE POINT, 123-125 FITZWILLIAM STREET, SHEFFIELD, S1 4JP
T: 0114 272 1984 E: counter@naturalbedcompany.co.uk www.naturalbedcompany.co.uk
HIGHLAND Assembly Instructions
1 x headboard rail
2 x side rails
4 x canopy cross beams
1 x set of plastic end caps (2 per slat)
8 x half-moon washers
1 x spanner
4 x small silver bolts
1 x hexagon key for silver bolts
Advertisement
Related Manuals for Natural Bed Company Highland
Summary of Contents for Natural Bed Company Highland
- Page 1 HIGHLAND Assembly Instructions Items included in bed flat pack are: 1 x Upholstered headboard panel 1 x headboard rail 1 x footboard rail 2 x side rails 4 x tall posts 4 x canopy cross beams 1 x centre rail...
- Page 2 2. Next build the headboard: take one of the two posts that have the large mortise slots in them (see the first image above) and insert the timber edge of the upholstered panel within the slot. Attach the lower headboard rail to the post using the half-moon washer supplied. Do the same to the other side using the remaining post with the mortise slot.
- Page 3 6. Lower the centre rail onto the brackets and push down firmly into position –see the previous images (N.B. single beds do not come with a centre rail). 7. Matching the numbers, place the shorter top cross beams onto the top of the posts across the bed’s width (you may need a second person to hold these in place).