The Info Strip On Photos; Test The Camera; Photo, Instant Send Mode; Photo, Send Mode Off - Spartan GoCam GV-W4Gb User Manual

Setting Items Description
Beep On/Off
FW Update Manual firmware update from SD card
LED Indicator
System On/Off
Settings Debug Switch Off/On. Useful to help tech support troubleshoot
(cont'd)
Camera Server For testing purposes only. Not for end-user use.
Used to save logs to SD card when Debug
Save Log
Switch is On.
Setting Items Description
Instant (send photo instantly)
Send Mode
Off (camera functions as a regular trail camera).
Send Via Premium or Auto.
Auto: input one recipient email address.
Recipient
(Premium: use the web portal to specify email
recipients.)
Up to 8 characters to appear on the photo info
Name Tag
strip. (Auto or regular trail cam mode. For
Premium, use the app or portal.)
On to conserve power, photo delivery takes a few
seconds longer because the camera only goes
Wireless
online to send a photo or status report; Off for
Settings Power
slightly faster photo delivery but shorter battery
Saving
life because the camera stays online all the time.
(Auto: use the setting in the camera menu.
Premium: use the setting in the app/portal.)
Register
Get the registration code needed to add the
Code
camera to your Premium account.
Register Email address linked to your Spartan Camera
Email account.
Hello Test (to test connectivity)
Diagnostic
Module FW Update (tech support use only)
APN Setting (tech support use only)

The Info Strip on Photos

Photo, instant send mode

1. Press the OK button to take a picture.
2. Press the OK button to send the picture to the portal/app (Premium) or
recipient programmed into the camera (Auto) or the  (Menu) button not
to send the photo.

Photo, send mode off

1. Press the OK button to take a picture.
2. Review the picture using the instructions that appear in Access Photos
or Videos section that follows.

Video

1. Press the OK button to start recording a video. The camera will record
video until you stop it or it runs out of storage space on the SD card; the
video length you set does not apply to manually-recorded videos.
2. Press the OK button to stop recording the video.
3. Review the video using the instructions that appear later in this section.

Access Photos or Videos

1. With the camera in Preview mode, press the playback button
to Playback mode to view photos or videos.
2. Use  or  to move through the photos or videos.
7

Test the Camera

►
to switch