Advertisement
1) It is strongly suggested to turn off all other Link/Tera-Stations on network
2) On computer, Run LSUPDATER.EXE
3) Choose Link/Tera-Station to update
4) Right click on Title Bar. Edit following options:
Update
[x] Update boot
[x] Update kernel
[x] Update initrd
[x] Update root
Destination of Firmware
\boot
Change IP Address if required
CONFIRM PROPER OPTION SETTINGS BEFORE PROCEEDING
- Config – Rebuild partition table
- Config – Delete user data partition
5) Click "OK"
CONFIRM PROPER NETWORK NAS TO UPDATE BEFORE PROCEEDING
7) Click "Update"
LSUPDATER will inform you when update process is complete.
When update is finished, you can now go to Navigator to program the NAS
options and applications.
Config
[x] Do not check version
[ ] Rebuild partition table [BLANK]
[ ] Delete user data partition [BLANK]
[x] Force update
MUST BE UNCHECKED
MUST BE UNCHECKED
Advertisement
