Page 1 FE-TEL-48G Android Video Phone Admin Guide FREUND ELEKTRONIKA d.o.o International Burch University | Francuske revolucije bb | 71210 Ilidza | Bosnia and Hercegovina | www.ip-integra.ba | info@ip-integra.com | Tel. +387 33 922 890...
Page 2: Table Of Contents
3. Daily Use ....................................... 14 3.1. Call ......................................14 3.1.1. Make A Call .................................. 14 FREUND ELEKTRONIKA d.o.o International Burch University | Francuske revolucije bb | 71210 Ilidza | Bosnia and Hercegovina | www.ip-integra.ba | info@ip-integra.com | Tel. +387 33 922 890...
Page 3 4.3.3. Configuring Wi-Fi ................................. 30 4.4. SIP Account Configuration ..............................33 4.4.1. Add Account ................................. 34 FREUND ELEKTRONIKA d.o.o International Burch University | Francuske revolucije bb | 71210 Ilidza | Bosnia and Hercegovina | www.ip-integra.ba | info@ip-integra.com | Tel. +387 33 922 890...
Page 4 4.8.4. Time out ..................................44 4.8.5. Do Not Disturb ................................44 4.8.6. Call Waiting .................................. 45 FREUND ELEKTRONIKA d.o.o International Burch University | Francuske revolucije bb | 71210 Ilidza | Bosnia and Hercegovina | www.ip-integra.ba | info@ip-integra.com | Tel. +387 33 922 890...
Page 5 4.14. Personalization Settings ..............................53 4.14.1. Wallpaper ................................... 53 4.14.2. Widgets ..................................54 FREUND ELEKTRONIKA d.o.o International Burch University | Francuske revolucije bb | 71210 Ilidza | Bosnia and Hercegovina | www.ip-integra.ba | info@ip-integra.com | Tel. +387 33 922 890...
Page 6 5.4. BLF ....................................... 72 5.5. Intercom ....................................74 5.6. Call Return .................................... 75 FREUND ELEKTRONIKA d.o.o International Burch University | Francuske revolucije bb | 71210 Ilidza | Bosnia and Hercegovina | www.ip-integra.ba | info@ip-integra.com | Tel. +387 33 922 890...
Page 7 5.16. Gallery ....................................87 5.16.1. View Photo & Picture & Video ............................ 87 FREUND ELEKTRONIKA d.o.o International Burch University | Francuske revolucije bb | 71210 Ilidza | Bosnia and Hercegovina | www.ip-integra.ba | info@ip-integra.com | Tel. +387 33 922 890...
Page 8 5.20.2. Countdown Timer ..............................100 5.20.3. Stopwatch ................................101 5.21. Gmail ....................................102 FREUND ELEKTRONIKA d.o.o International Burch University | Francuske revolucije bb | 71210 Ilidza | Bosnia and Hercegovina | www.ip-integra.ba | info@ip-integra.com | Tel. +387 33 922 890...
Page 9 7. System Maintenance .................................. 114 7.1. System State Inspection ..............................114 7.2. IP Query ....................................115 FREUND ELEKTRONIKA d.o.o International Burch University | Francuske revolucije bb | 71210 Ilidza | Bosnia and Hercegovina | www.ip-integra.ba | info@ip-integra.com | Tel. +387 33 922 890...
Page 10 8.11. Phone->Video ................................... 145 8.12. Phone->Ext Key ................................147 8.13. Phone-> Tone ..................................148 FREUND ELEKTRONIKA d.o.o International Burch University | Francuske revolucije bb | 71210 Ilidza | Bosnia and Hercegovina | www.ip-integra.ba | info@ip-integra.com | Tel. +387 33 922 890...
Page 11 8.23. Upgrade->Basic ................................161 8.24. Upgrade->Advanced ................................. 162 8.25. Security->Basic ................................. 165 8.26. Security->Advanced ................................166 FREUND ELEKTRONIKA d.o.o International Burch University | Francuske revolucije bb | 71210 Ilidza | Bosnia and Hercegovina | www.ip-integra.ba | info@ip-integra.com | Tel. +387 33 922 890...
Page 12: Product Overview
1.3M CMOS sensor camera. It supports H.264/H.263 codecs with adaptive bandwidth adjustment. The 7-inch touch screen offers excellent user experiences such as high-quality videophone, smooth internet surfing, various Android Apps and daily information. FE-TEL-48G provides 2 Ethernet ports, 1USB, 1HDMI, and one 3.5mm headset/audio port.
Page 13: Equipment Appearance And Interface Description
1.2. Equipment Appearance and Interface Description HDMI Headset...
Page 15: Interface Description
1.2.1. Interface Description Interface Description Camera Adjustable camera shooting angle, rotate down the camera to "off" angle. USB interface External USB storage device Headset Connect to 3.5mm stereo headphone, headset device HDMI Use HDMI cable to output the video to a TV screen Network interface can be connected to a hub, switch or other network access device also supports POE.
Page 16: Keypad Description
1.2.2. Keypad Description Interface Description Power Turn on/off the LCD, Reboot, Silent mode Suspend Turn on/off the LCD, Reboot, Silent mode Press + or – for the phone volume adjustment Volume Standard Input the number or symbol Keypad Delete Delete a character before the cursor Same function with soft keyboard "Enter"...
Page 17 conference key, the first party can be combined to achieve a tripartite meeting Hold To hold a call during the call Transfer To transfer the current call to the third party Mute The other party cannot hear the voice during the call Return to the main screen, and long press, it will Home display recently used applications...
Page 18: Pendant(Optional)
48G supports 2 frequency pendants - 433 and 869. Pendant is used to call out the emergence number when you need help. However, users can choose whether the pendant is needed, based on your own needs. 1.4. Indicator 1.4.1. Indicator of FE-TEL-48G Indicator Name Icon Status...
Page 19: Indicator Of Pendant
1.4.2. Indicator of Pendant Indicator Status Description Notes The pendant is in low battery power User need to replace the battery. status. Flashing Yellow The pendant powers on again. (1) The pendant in factory-test (1) If user long press the pendant button meanwhile mode.
Page 20 Flashing Red the phone, press pendant button. pendant with the phone. Press the pendant to make a call (2) The maximum distance over 200 meters after it matched between the matched phone with the phone. with the pendant is about 200 meters.
Page 21: Installation
2. Installation 2.1. Equipment Packaging Name Quantity Main Case Handset Phone Cord Power Adapter Ethernet Cable Quick Start Guide...
Page 22: Connecting Video Phone
2.2. Connecting Video Phone ⚫ Connection diagram...
Page 23 ⚫ Connecting to Network Use the matched network cable to connect the LAN Port of the video phone to the Router or Switch. Viewing the top right corner of the screen, if the indicator light is on, network cable is connected properly. ⚫...
Page 24: Installation Considerations
2.3. Installation Considerations This product is a desktop product, and here are some safety recommendations about the installation and the usage: ⚫ Do not use this product near water, such as: bath, washbasin, kitchen sink and other damp places, and so on; ⚫...
Page 25: Daily Use
3. Daily Use 3.1. Call 3.1.1. Make A Call Users can directly dial from the keypad, select from the contact list or from call records to call out the number. Users can choose one of the following steps to enter into the dialing interface. Mode 1: Directly pick up the handset.
Page 26: Dial Out Directly
3.1.2. Dial Out Directly 1) By pressing the number keys on the dial interface or directly pressing the number on keypad. To delete a number, press the icon on the dial interface, or press Delete button on the keypad. 2) If you want to make an audio call, click Audio Call label. If users want to make a video call, click Video Call label.
Page 27: Dialing Out From Contact List
3.1.3. Dialing Out from Contact List 1) Tap icon ->Click the icon -> Label Phone Book->All Contacts. 2) Click label to make an audio call, click label to make a video call, or click label to send the message. 3.1.3.1. Contacts Fuzzy Matching Query Phone supports contacts fuzzy matching queried, intuitive, concise dialing interface for the intelligent input, greatly reducing the number of...
Page 28: Receive A Call
3.1.4. Receive a call Incoming calls include audio and video calls. If the caller has been stored in the contacts, it will show the contact name, otherwise the caller number will be displayed. 3.1.4.1. Answer a call 1) Answer an audio call When receiving an audio call, click Audio label or pick up the handset or press speaker button on the keypad to answer.
Page 29: Call Options
3.1.4.2. Reject A Call If users want to reject a call, click label in calling interface. If users want to reject a call from a number, you can add the number to the blacklist. 3.1.5. Call Options During the audio conversation Call options are described as below.
Page 30 Hold: Click the button to hold the current call, press to resume Transfer: Click the button to enter the establish transfer interface Mute: Click the button to mute, to resume. Video call: Click the button to send a video request/close the video Answer mode: to switch handset , handsfree...
Page 31: Multiple Calls
Video options are described as below. : Support local and remote video displayed; : Support remote video displayed; : Click to open full screen/ exit full screen. 3.1.6. Multiple Calls ⚫ The Phone supports more than 3-line calls. The line information is on the right side of call interface.
Page 32: Basic Setting
4. Basic Setting 4.1. Main Screen Instruction ⚫ Status bar, at the top of the screen, displaying the status of system information. ⚫ Shortcuts, at the bottom of the screen, users can drag a shortcut to this region to achieve the replacement of the shortcut. Supports max four shortcuts.
Page 33: Status And Notifications Instruction
4.2. Status and Notifications instruction The status bar in main screen is divided into two zones, notification area and status area, as shown below: Status Area Icon Description Network is connected Slide mode (Sound is off) Alarm clock is set Bluetooth active...
Page 34 Notification Area Icon Description SIP account is unregistered SIP account is registered Missed call uploading...
Page 35: Using The Touchscreen
4.2.1. Using the Touchscreen ⚫ Tap To select items on the screen (e.g., setting options, apps); to press onscreen buttons; to type letters and symbols using the onscreen keyboard. ⚫ Touch and Hold Touch the item on the screen and hold it without lifting your finger from the screen till an action occurs.
Page 36: Startup And Shutdown
the screen, place your finger on the bar and slide it down. If your finger stays on the screen for too long, the item may be selected and sliding won’t occur. ⚫ Double-click Click on the screen twice in quick succession, for example, when user surfs in browser, you can quickly click twice on the page, and then the page can be enlarged.
Page 37: View / Turn Off Notifications
⚫ Reboot If you need to restart the device, according to the following steps: 1) Press and hold the "Power" button until the pop-up "Options" menu. 2) Click the "Reboot" 4.2.3. View / Turn Off Notifications ⚫ To view notifications, drag down the status bar, then click each notification bar to view the detail notification.
Page 38: Connecting To Network And Wi-Fi
4.3. Connecting to Network and Wi-Fi FE-TEL-48G supports a variety of network connections (Ethernet, Wireless) and the device Network connections, including three modes, Static IP, DHCP, Wi-Fi access. DHCP is the default configuration. The device connections include EHS headset, USB and Bluetooth device.
Page 39 Mode 2: In the main screen, tap icon -> Network Settings -> LAN Type->Access Mode->chose Static IP. IP address: Set the IP address of the device Subnet Mask: Set the subnet mask of the device Default Gateway: Set the default gateway DNS Server: Set the DNS address Alternative DNS Server: Set the backup DNS address...
Page 40: Configuring Dhcp
4.3.2. Configuring DHCP The Phone will automatically get IP address once you choose DHCP mode. You can select one of the following methods to enter the DHCP configuration interface: Mode 1: In the main screen, tap icon -> Settings -> Wireless & Networks->More->Ethernet ->...
Page 41: Configuring Wi-Fi
4.3.3. Configuring Wi-Fi You can select one of the following methods to enter the Wi-Fi configuration: Mode 1: In the main screen, tap icon -> Settings -> Wireless & Networks-> Wi-Fi. Mode 2: In the main screen, drag down the middle of the idle screen to display notifications->...
Page 42 1) When the Wi-Fi switch is turned on, the video phone can list and display all Wi-Fi AP searched in the environment. 2) When FE-TEL-48G connects to available AP in the environment, if a Wi-Fi AP is without password protection, there is no lock icon on Wi-Fi signal, it will automatically connect when clicked.
Page 43 5) Tap the connected Wi-Fi AP, it will pop-up a dialog box, you can forget the network or modify the network. Touch and hold on the non-connected Wi-Fi AP, it will pop up a dialog box, and you can click and connect to network. 6) Click Menu, you can do the operations, such as, adding network setting, refreshing the Wi-Fi AP list and Advanced setting.
Page 44: Sip Account Configuration
4.4. SIP Account Configuration You can select one of the following methods to enter the SIP account configuration: ⚫ Mode 1: In the main screen, tap icon -> click -> click Account Manager. ⚫ Mode 2: In the main screen, tap ->...
Page 45: Add Account
4.4.1. Add Account Click an account to enter the interface of Account Editor. ⚫ Register Name: SIP Account ID provided by ISP ⚫ User Name: SIP User Name provided by ISP ⚫ Password: SIP Password provided by ISP ⚫ Display Name: SIP Display name ⚫...
Page 46: Sip Account On/Off
After all the parameters are configured, click "save" button to save the configurations, then the sip account is added successfully. Then activate the account. 4.4.2. SIP Account ON/OFF After SIP account is configured and registered successfully, it will display the prompt “Registered” in the Account Manager, and the icon will be displayed on the status bar.
Page 47: Modify/Remove Sip Account
4.4.3. Modify/Remove SIP Account Modify the sip account: Directly click the account to modify. Remove the sip account: Click the box of the account which you want to delete, the bottom of the account list will display the label “Clear Account”, tap this label to remove the selected account.
Page 48: Volumes
Mode 3: Drag down the status bar, click the icon on the status bar ->tap icon ->Device-> Sound & notification. Including Volume, Ringtone and Notification. 4.5.1. Volumes In Sound & notification page, the volume configure is shown as below： Volume options include Media, Alarm clock, Notification. You can directly click a volume location to adjust the volume.
Page 49: Interruptions
⚫ Volume options include Media, Alarm clock, Notification. ⚫ You can directly click a volume location to adjust the volume. ⚫ The volume settings, you can also press the keyboard volume button “+ -” to increase or decrease the volume. Usually, volume button is to adjust for ringtone or notification volume, but in the broadcast media, pressing volume button is to adjust for media volume.
Page 50: Phone Ringtone
Touch and hold the Power button, tap the Silent mode bar in the pop-up menu to change the status. The silent mode icon will be displayed on the right side of the status bar. 4.5.3. Phone ringtone In the Sound & notification interface, click the Phone ringtone bar to pop up default ringtone setting interface.
Page 51: Default Notification Ringtone
4.5.4. Default notification ringtone In the Sound & notification interface, click the Default notification ringtone bar to pop up the phone default notification ringtone setting interface. Click the ringtone you want to set, after the selection, it will ring a short time. Finally, click "OK". Setting interface is shown as below. 4.5.5.
Page 52: Audio Settings
To setup the corresponding audio parameters and Volume. Echo Canceller: To remove acoustic echo from a voice communication in order to improve the voice quality. Automatically Generation Control: FE-TEL-48G will auto adjust amplification circuit gain via signal. Volume: To configure different types volume for hands-free, handset and headset NetEQ: Filter forgetting factor base: Range from 0~255.
Page 53: Call Settings
4.8. Call Settings 4.8.1. Always forwarding & Forwarding Number All the incoming calls will be forwarded unconditionally to specified number. Configuration on the phone: Phone Settings -> Call Settings -> Call Forwarding -> Always Forwarding Select the desired account on the Account bar. Check to enable Always Forwarding feature.
Page 54: No Answer Forwarding & Forwarding Number
Configuration on the phone: 1. Phone Settings->Call Settings->Call Forwarding->Call Forwarding Busy 2. Select the desired account on the Account bar. 3. Check to enable Call Forwarding Busy feature. 4. Input the forward number into the Forwarding Number bar. 4.8.3. No Answer Forwarding & Forwarding Number The incoming calls will be forwarded to the specified number when the ringtone is time out without answer.
Page 55: Time Out
4.8.4. Time out Set up the no answer forwarding time. When the call is beyond the time (the default is 30 seconds) without answering, it will forward to the target number. The range value is 0 to 120 second. 4.8.5. Do Not Disturb DND function is to prevent foreign phone from disturbing, if DND is open, external phone call is unable to call in, and turned off by default.
Page 56: Call Waiting
4.8.6. Call Waiting If call waiting feature is enabled, after establishment of a conversation, there is a third party call in, then video phone will have a new call tips, the incoming call will be displayed on the conversation interface, users can choose to answer or reject the call.
Page 57: Intercom
4.8.8. Intercom It is used to answer the incoming call automatically after users set up the intercom function. In default situation, the phone will answer the intercom call automatically, the speaker’s voice can be heard by intercom originator. Users can set the phone to enable silent mode when auto-answer the intercom call and the intercom originator will not hear speaker’s voice.
Page 58: Dial Plan
4.9. Dial Plan Rules: Allow users to select Replace Rules or Dial Now to display or edit. Rules Modify: Allow users to modify selected rules information, for replace rule, you can modify related accounts, prefix number and replace number. Area Code: Area codes are also known as NPAs (Numbering Plan Areas).
Page 59: Auto Provision
4.10. Auto Provision Phone can be configured to resynchronize its internal configuration state to match a remote profile periodically and on power up by contacting a normal provisioning server (NPS) or an access control server (ACS). 4.11. Personalize 4.11.1. Log Level The Log level is divided into seven levels: EMERG, ALERT, CRIT, ERR, WARNING, NOTICE, INFO, DEBUG, log class, which are from low to high.
Page 60: Reboot Manager
4.12. Reboot Manager 4.12.1. Reboot time Users can setup the reboot date and hour you want. 4.12.2. Status of time If the status is enabled, users can edit the reboot time you want. 4.12.3. Status of active Enable/disable the reboot function.
Page 61: Reboot Settings
4.12.4. Reboot settings Set the reboot time. Disable this feature by default. 4.13. Date & Time You can select one of the following methods to enter Date & Time configuration: Mode 1: In the main screen, tap -> Settings ->System->Date & time. Mode 2: Drag down the status bar, click icon on the status bar ->tap icon...
Page 62 If users want to manually set the date and time, firstly, they can tap Automatic data & time bar to disable status, and then set the date, time, select a time zone. Tap Set date bar to pop-up date set interface. ap Set time.
Page 63 Tap the Choose date format bar to pop up the date format selection interface. Month/Day/Year format by default.
Page 64: Personalization Settings
4.14. Personalization Settings According to personalized settings, users can set the equipment more characteristic. 4.14.1. Wallpaper Users can use the following ways to set the favorite wallpaper. Mode 1: In the main screen, Press Menu button on the keyboard-> tap WALLPAPERS icon. Mode 2: In the main screen, touch and hold on the blank part of desktop->...
Page 65: Widgets
4.14.2. Widgets Widgets can be convenient for user use, users can select from the available options. 4.14.2.1. Add A Widget Users can use the following ways to add the widgets. Mode 1: In the main screen, Press Menu button on the keyboard->...
Page 66 4.14.2.2. Modify an added Widget If users want to modify the location of added widgets on the desktop, touch and hold the widget until the icon appears on the upper left corner of the screen, drag the widget to the corresponding position of the desktop.
Page 67: Shortcuts
4.14.2.3. Delete Widget Touch and hold the widget until the icon appears on the upper left corner of the screen, drag the widget to location until the widget turn red, then move fingers away to delete the widget. 4.14.3. Shortcuts Users can add the shortcuts such as Application, Webpage bookmarks and the other applications to the main screen desktop.
Page 68 4.14.3.1. Add Shortcut In the main screen, click icon , touch and hold a shortcut, put it to the designated location on the desktop, then move fingers away the main screen. 4.14.3.2. Modify Shortcut If users want to modify the location of shortcut on the desktop, hold the shortcut until the icon appears on the upper left corner of the screen, you can drag the shortcut to the corresponding position of the desktop.
Page 69 4.14.3.3. Delete Shortcut Touch and hold the shortcut until the icon appears on the upper left corner of the screen, drag the shortcut to location until the shortcut turn red, then move fingers away to delete the shortcut. 4.14.3.4. Modify Extended Bar Users can modify the quick start program on the extended bar at the bottom of the screen.
Page 70: Ringtone
4.14.4. Ringtone Users can select the ringtone provided by phone default, can download music from the Internet, and then set the favorite music as a ringtone. If users choose the ringtone provided by phone default, please refer to Sound & notification settings. If users choose the music downloaded from the Internet as a ringtone, please follow the below steps: Click...
Page 71: Backup & Reset
4.14.5. Backup & Reset Click Setting Personal->Tap Backup & reset. Personal data-> click Factory data reset. Check Erase SD card-> click RESET DEVICE label-> tap ERASE EVERYTHING label.
Page 72: Function
5. Function 5.1. Call Records 5.1.1. View Call Records When you’ve got a missed call, the screen will display the missed call notification in above status bar. Users can drag down to open the notification list, then click the missed call notification to view call records. Users can also directly through the dialing interface to view call records: In the main screen, click Click icon...
Page 73: Call From Call Records
Call records are shown on the left. Click the number or contact, and users can view all the call records details on the right. 5.1.2. Call from Call Records In All Call, Missed Call, Received Call, Dialed Call or Forwarded Call interface, users can follow the below steps to initiate a call.
Page 74 5.1.2.1. Delete Call Records To delete one call record, steps as below: 1. Long press the call record you want to delete. 2. Pop-up a menu, press Confirm label to confirm the deletion. To delete multiple call records, steps as below: 1.
Page 75: Contacts
5.1.2.2. Add a Contact from Call Records To save a number from the call records, or merge the number into the existing contact number list. Do the following operations. 1. Click the number on the call records list. 2. To add a new contact, click icon , a new contact edit page will pop up.
Page 76: Local Phone Book
5.2.1. Local Phone Book Users can view, audio call, video call, add, edit, delete the Local contacts. 5.2.1.1. Add New Contact Click the icon on the top right corner, and click New Contact label in the drop-down window. The new contact interface is shown as follows: : Edit the contact photo, Browse the image from “Take Photo”...
Page 77 To add some more information, click , pop up the page of contact details, click to save. 5.2.1.2. Modify Contact 1) Select the contact need to modify in the contact list. 2) Click icon 3) Enter into contact edit page, edit the contact information. 5.2.1.3.
Page 78: Broadsoft Phone Book
5.2.2. BroadSoft Phone Book To setup BroadSoft contact. For BroadSoft Phonebook’s server address, port, username and password, users need to consult the BroadSoft service provider for further information. 5.2.3. Remote Phone Book Access the remote phone book, add the contacts to the local phone book from the remote phone book or make calls from the remote phone book.
Page 79: Ldap
Enter the remote phone book via phone interface. 1. Access contact setting interface-> click Remote phone book. 2. Select the relevant Remote Group and press the Enter softkey. The phone will load the remote group information, and the LCD will display the contacts of this remote group.
Page 80: Group
5.2.5. Group Group, it will be convenient for you to have contact group management. Contacts should at least belong to a group; the default is no group. 5.2.5.1. Add A New Group Access contact setting interface-> Local Phone Book-> tap icon the upper right of the screen.
Page 81 5.2.5.3. Edit Group 1) Click the group to enter edit page. 2) Click Edit Member->check the member-> tap Confirm label to delete, or touch and hold the existed member, it will pop up a prompt to delete the member.
Page 82: Rf Number(Optional)
5.3. RF Number (Optional) This feature is specially designed for the elders. When the user needs help, he/she can press the pendant to dial out for emergency help. Setup RF number： ⚫ Go to the path: Phone Setting- RF Setting. ⚫...
Page 83: Blf
5.4. BLF Busy Lamp Field (BLF) is used to monitor a specific user for status changes on IP phones. For example, users can configure a BLF key on a supervisor’s phone to monitor the phone user status (busy or idle). When the monitored user places a call, a busy indicator on the supervisor’s phone indicates that the user’s phone is in use.
Page 84 After finishing BLF Key configuration, you can drag ExtKey from the WIDGETS to the main interface.
Page 85: Intercom
5.5. Intercom Select Type as Intercom, enter intercom code in Value. Choose the availed account. To click Confirm to save. Note: Different SIP servers have different codes. 1) Press the Intercom key when the phone is available. The phone will connect the extension number of remote users automatically.
Page 86: Call Return
5.6. Call Return This function can be used to call the latest dialed call record automatically.
Page 87: Blflist
Note: BLFListCode is supported by BroadSoft platform, please consult your administrator further information. 5.8. Pickup & Group Pickup Users can use pickup to answer other users’ incoming call. The phone Freund 48G supports specified pickup and group pickup. ⚫ Specified pickup...
Page 88: Acd
Specified pickup can answer specified user’s incoming calls. When the user of specified pickup number is off or busy, users can press the pickup key to answer incoming call instead of the specified number. ⚫ Group pickup Group pickup can answer incoming calls of group’s user. When anyone in group receives an incoming call, users can press the group pickup key to answer.
Page 89: Hot Desking
server. ACD is disabled on the phone by default. Users need to enable it on a per-line basis before logging into the ACD system. 5.10. Hot Desking In some working place, the people are always walking around. Hot Desking feature will make the staffs login his account on any computer in the company.
Page 90: Create 3-Way Conference
5.11.1. Create 3-way conference 1) Create talking with first party; 2) Press to create a new talking; 3) Input the number of second party and press the Video Call or Audio Call to make a call; 4) When the second party answers the call, you can press the Conference softkey or the Conference key on the keypad to start 3-way conference.
Page 91: Transfer
5.12. Transfer 5.12.1. Blind Transfer 1) During the first way conversation, press transfer key on the keypad or click to enter the configuration interface. 2) Enter the transfer number, then click Blind label to transfer the number. 5.12.2. Attended Transfer 1) During the first way conversation, press transfer key on the keypad or click enter the configuration interface.
Page 92: Keypad Input
3) When the third party answered, press to confirm the transfer. 5.13. Keypad Input Only numbers, * and # can be input by keypad. The default Input method is Android keyboard. Users can also download the preferred input method from the internet.
Page 93: Webpage Browser
5.14. Webpage Browser This section describes the default web browser in the video phone, and users can also download the preferred browser through the internet. Users can use one of the following methods to run the browser: ⚫ Mode 1: In the main screen, click ⚫...
Page 94: Open The Webpage
5.14.2. Open Webpage 5.14.2.1. Browser Address Bar Run the browser, enter the URL in the address bar or direct input the information to search. After the input, users can click “Go” on the soft keyboard to complete. 5.14.2.2. Bookmark and Browsing History Run the browser, click to view the bookmark &...
Page 95: Camera
5.15. Camera 1. In the main screen, click -> 2. Slide right on the screen, view the photos and videos in “Gallery”. 5.15.1. Photograph Mode Turn on the camera, and the default mode is photograph mode. 5.15.1.1. Basic Setting Click on the right upper corner pop up the menu on the right list.
Page 96 5.15.1.2. Mode Switch Slide right on the screen to switch the mode. Click icon on the right upper corner to enter the related parameters setting interface. : Video mode : Photo mode Users can enter to set the resolution & quality to set the camera & video parameter.
Page 97 5.15.1.3. Take a Photo Users can click the button on the right side to take pictures. If users want to adjust the focal length, they can use two fingers to press on the screen, shrinkage or expansion to adjust the focal length. 5.15.1.4.
Page 98: Gallery
5.16. Gallery Users can use Gallery to view photos or videos, and they can also view the picture or video downloaded from the Internet. Users can edit the photo or picture and set it as wallpaper. In the main screen, click icon ->click icon 5.16.1.
Page 99: Bluetooth
Bluetooth portable devices by installing Bluetooth Application, or use Bluetooth headset for making calls. To connect to a Bluetooth device, turn on FE-TEL-48G’s Bluetooth radio first. The first time when using a new Bluetooth device with the...
Page 100: Turning Bluetooth On /Off
FE-TEL-48G, “pair” the device with FE-TEL-48G so that both devices know how to connect securely to each other. After that, users could simply connect to a pared device. Turn off Bluetooth if it’s not used. Bluetooth related settings are under FE-TEL-48G’s Settings application →...
Page 101: Changing Bluetooth Device Name
5.17.2. Changing Bluetooth Device Name The FE-TEL-48G uses “FE-TEL-48G” as Bluetooth device name by default. The device name will be visible to other devices when connecting them. Follow the steps below to change the name: ⚫ Press on screen -> click icon ⚫...
Page 102: Paring Fe-Tel-48G With A Bluetooth Device
⚫ The discovered device will show in the available devices list with device ID. Make sure the Bluetooth device is active in pairing mode. Then tap on the device ID on the FE-TEL-48G to pair them. Confirm the passkey in the prompted message (if any). Or if PIN is...
Page 103: Un-Pairing A Bluetooth Device
PIN. 5.17.4. Un-pairing a Bluetooth Device After successfully paired, the FE-TEL-48G will show in Paired devices bar with paired device name. Once it’s connected, users can tap icon , then click FORGET to unpair the connected device.
Page 104: Usb
5.18. USB The video phone supports USB connection for keyboard and USB storage devices. To use USB keyboard, simply plug it into the USB port on the right side of the video phone and it will be ready to use. To connect and access USB storage device: ⚫...
Page 105: Calendar
5.19. Calendar To start the calendar： ⚫ In the main screen，click icon -> Calendar ⚫ If one day has activity, the color will appear on the calendar to remind. 5.19.1. Add an Account While using the calendar at the first time, it will remind you to add an account.
Page 106: View Calendar
5.19.2. View Calendar The calendar will display weekly by default, and you can slide the calendar up and down to view the different weeks. In order to view the activities or create the new activities, you can also make the calendar display daily or monthly.
Page 107: New Activities
5.19.3. New Activities While Calendar is displaying as daily or weekly, you can use the following methods to create a new activity: ⚫ Click on the date, and then click on the time period; ⚫ Click on 1) Input the details of the activity, 2) Click “Done”...
Page 108: Clock
5.20. Clock Enter the Clock: ⚫ In the main screen, click -> Clock icon : Alarm : Default real time : Countdown timer : Stopwatch : Time zone Others : Others setting 5.20.1. Alarm User can add one or multiple alarms:...
Page 109 1) Click 2) Click icon 3) To set the hour and minute, click the digit on the right side to set hour and minute. 4) Then users can select enable or disable repeat the alarm in some days of a week, select the ringtone of the alarm and edit display label.
Page 110 5.20.1.2. Modify Alarm If users want to modify the status of the alarm, including time, repeat data, alarm ringtone, which can directly click on the alarm. 5.20.1.3. Delete Alarm In Alarm page, users click the alarm, after pop-up the dialog box, select to delete the alarm.
Page 111: Countdown Timer
5.20.2. Countdown Timer 1) Click . Click the digit on the right side. Show as below. 2) Click to delete the digits. Click icon to start the countdown timer. Click to stop the time. : Click to add one minute to countdown timer : Click to delete the current countdown timer : Click to add another countdown timer : Click to reset the countdown timer...
Page 112: Stopwatch
5.20.3. Stopwatch 1) Click icon 2) Click icon to start the time. Click to stop the time. 3) In normal, click icon to remember the corresponding time. 4) When the time is on hold, you can click icon to reset the timer. 1 0 1...
Page 113: Gmail
5.21. Gmail Email Application can let you use POP3 or IMAP service to send and receive e-mail. Start Email： ⚫ In the main screen, click ->Email 5.21.1. Add A New Gmail Account Make sure the email account has enabled POP3 or IMAP service, and you can add many accounts.
Page 114: Music
⚫ If you have already set up an email account, In the main Email page, press “Menu” button, and then click “Account”, and last press” Menu” to “Add Account”. 1) Input the email account and password, and then click “Next”; 2) If there is no account type in the equipment database you want to set, the device will require you to enter more detailed information (the receiving server settings and outgoing server...
Page 115: Explorer
5.23. Explorer Users can use explorer to manage the files in the device. In the main screen, click icon -> Explorer icon . As shown below. Click mnt to enter to show as below. If the USB device is inserted, it will be displayed in this layer.
Page 116: Video Player
5.24. Video Player Users can use video player to play local videos. To run the video player: In the main screen, click -> Video icon After entering, users can click on the list of videos to watch. Screen Brightness Adjustment : Click to adjust the volume : Click to add into the Bookmark.
Page 117: Others
: Screen size adjustment, four type of video sizes: original size, full screen, 16:9. : Others 5.25. Others 5.25.1. Apk Install Users need open phone permission before installing. Go to the path: Settings-> Security, enable Unknown sources. In the main screen, click ->Explorer.
Page 118: Software Upgrade
6. Software Upgrade 6.1. Immediate Update Choose one way below to enter the system upgrade interface: ⚫ In the main screen, press “Menu” on board -> System Settings -> System -> About Multimedia Terminal -> System Upgrade -> System Update Now ⚫...
Page 119: Select Other Upgrade Package
Three ways to update immediately: Local Update, Select other upgrade package, Remote Upgrade. 6.1.1. Select Other Upgrade Package 1) Via USB to Upgrade Put upgrade package into USB, insert USB, and then click “Select other upgrade package”, find “/mut/usb_storage”, find the upgrade package, then click “OK”...
Page 120: Local Update
6.1.2. Local Update 1) Via USB to Upgrade Change the name of upgrade package into upgrade.zip, then copy it into USB, insert USB, enter the upgrade interface, users will find the path of upgrade package, because video phone has searched it automatically, click “Local Update”...
Page 121: Remote Update
6.1.3. Remote Update 1) Enter the interface in figure 5-1, click “Server Address”, and input the server address that contains upgrade package. As shown below: 2) Click “Remote Upgrade”, and video phone will check the new version automatically. If exist a new version, it will prompt. Press “OK” to download upgrade document.
Page 122: Auto Update Period
6.2. Auto Update Period Auto Update Period includes four modes: None, One Day, One Week, and One Month. The terminal will detect the new version automatically in time, if there is, the status bar will show “There is a new version, please update!”.
Page 123: Upgrade On The Web
6.3. Upgrade through web interface 1) Click Upgrade->Basic. 2) Click the label to select the version to upgrade. 3) Click to save. 1 1 2...
Page 124: Check Update After System Power On
6.4. Check Update After System Power On Click “Check Update After System Power On”. Shown as below. Every time user power on, the system will check the new version automatically. If there is a new one, the status bar will notice: “System has new version, please update now!”, (and) then click and download the image for upgrade.
Page 125: System Maintenance
7. System Maintenance 7.1. System State Inspection Mode 1: In the main screen, click -> Status info->Version info Mode 2: In the main screen, click -> -> About device It will display phone status, software version and hardware version in this item.
Page 126: Ip Query
7.2. IP Query Mode 1: In the main screen, press, click -> Status info-> Network Status Mode 2: In the main screen, click -> ->More-> Ethernet Mode 3: Press Speaker button or pick up to enter the dialing interface, click on upper right corner ->...
Page 127: Sip Account Registration Query
7.3. SIP Account Registration Query You can choose one of the following methods to enter the SIP account registration query. If the account is successfully registered, the icon will be light up in notification area of phone. Mode 1: Press Speaker button or pick up to enter the dialing interface, click on upper right corner, and check Account Manager.
Page 128: Backup & Reset
7.4. Backup & Reset Mode 1: In the main screen, press "Menu" key on the hard keyboard-> System Settings-> Backup & reset Mode 2: In the main screen, click -> -> Backup & reset Select “Erase SD card”, click “RESET DEVICE”, then the phone will restore to factory settings.
Page 129 ⚫ Please check whether the connection of handset is working properly; ⚫ Please adjust the volume + key on keyboard when off-hook the phone, observe the display of “volume” prompt. Please pay attention that the volume key in on-hook and off-hook situation is to adjust the ring volume and media volume (call volume) separately.
Page 130 no explanation of configuration failure, please contact network administrator to recover it. Failure 4: No ringing when incoming a call ⚫ Please make sure the handset is completely hung on the base ⚫ Please adjust the volume + key on keyboard when on-hook the phone, Observe the display of “volume”...
Page 131: Web Interface
8. Web Interface 8.1. Web login 1. Open the browser on the computer. 2. Input the IP address in the address bar. 3. Enter the user name and password (user name: admin, password: admin), then click 1 2 0...
Page 132: Status->Basic
8.2. Status->Basic Click Status->Basic to check the phone information. Product Information: To display the device’s information such as Model name, MAC address (IP device’s physical address), Hardware Model, Firmware version and Hardware firmware. Network Information: To display the device’s Networking status (LAN Port), such as Port Type (which could be DHCP/Static), Link Status, IP Address, Subnet Mask, Gateway, Primary DNS server, and Secondary DNS server.
Page 133: Account->Basic
8.3. Account->Basic To display and configure the specific Account settings. Status: To display register result. Account: Choose which account you need to register. Account Active: Enable it to active the account. Display Label: Which is displayed on the phone’s LCD screen. Display Name: Which is sent to the other call party for display.
Page 134 Registration Period: The registration will expire after Registration period, the IP phone will re-register automatically within registration period. SIP Server 2: To display and configure Secondary SIP server settings. This is for redundancy, if registering to Primary SIP server fails, the IP phone will go to Secondary SIP server for registering.
Page 135 Outbound Proxy Server: To display and configure Outbound Proxy server settings. An outbound proxy server is used to receive all initiating request messages and route them to the designated SIP server. Note: If configured, all SIP request messages from the IP phone will be sent to the outbound proxy server forcefully.
Page 136: Account->Advanced
STUN: Short for Simple Traversal of UDP over NATS, a solution to solve NAT issues. Note: By default, NAT is disabled. 8.4. Account->Advanced SIP Account To display current Account settings or to select which account to display. Audio Codecs To display and configure available/unavailable Audio codecs list. Codec means coder-decoder which is used to transfer analog signal to digital signal or vice versa.
Page 137 Video codec is used to transfer analog signal to digital. We can support 2 video codec - H263, H264 Codec Resolution: It can support QCIF, CIF, VGA, 4CIF, and 720P. Codec Bitrate: The lowest bitrate is 128, the highest bitrate is 2048. Codec payload: From 90-119.
Page 138 DTMF To display and configure DTMF settings. Type: Support Inband, Info, RFC2833 or their combination. How to Notify DTMF: Only available when DTMF Type is Info/Info+Inband/Info+RFC2833. DTMF Payload: To configure payload type for DTMF. Note: By default, DTMF type is RFC2833 which is the standard. Type Inband uses inband frequency to indicate DTMF tone which is most used to be compatible to traditional telephone server.
Page 139 Call To display and configure call-related features. Max Local SIP Port: To configure maximum local sip port for designated account. Min Local SIP Port: To configure minimum local sip port for designated account. Caller ID Header: To configure which Caller ID format to fetch for displaying on Phone UI.
Page 140 Anonymous Call Rejection: If enabled, all incoming anonymous-out call for the designated account will be rejected. Is escape non Ascii character: To transfer the symbol to Ascii character. Missed Call Log: To display the miss call log. Prevent SIP Hacking: Enable to prevent SIP from hacking. Session Timer To display or configure session timer settings.
Page 141 BLF List To display or configure BLF List URI address. BLF List URI: BLF List is short for Busy Lamp Field List. BLFList PickUp Code: To set the BLF pick up code. BLFList BargeIn Code: To set the BLF barge in code. Broadsoft To display or configure Broadsoft AOC feature.
Page 142 To display NAT-related settings. UDP Keeps Alive message: If enabled, IP phone will send UDP keep-alive message periodically to router to keep NAT port alive. UDP Alive Msg Interval: Keep alive message interval. Rport: Remote Port, if enabled, it will add Remote Port into outgoing SIP message for designated account.
Page 143 User Agent One can customize User Agent field in the SIP message; if user agent is set to specific value, users could see the information from PCAP. If user agent is not set by default, users could see the company name, model number and firmware version from PCAP Remote User Agent This feature needs to be used with Auto Answer Door Phone Delay.
Page 144: Network ->Basic
8.5. Network ->Basic LAN Port To display and configure LAN Port settings. DHCP: If selected, IP phone will get IP address, Subnet Mask, Default Gateway and DNS server address from DHCP server automatically. Static IP: If selected, you have to set IP address, Subnet Mask, Default Gateway and DNS server manually.
Page 145: Phone->Time
LAN Port/PC Port: You can configure VLAN setting for both ports respectively. Active: To enable or disable VLAN feature for designated port. VID: To configure VLAN id for designated port. Priority: To select VLAN priority for designated port. Note: Please consult your administrator for specific VLAN settings in your networking environment.
Page 146: Phone->Preference
8.8. Phone->Preference Key Press Sound: To configure the sound volume for key press. Volume: The valid volume range is from 0~15, by default it’s 8. Ringtone Volume: To configure the sound volume for ringtone. Volume: The valid volume range is from 0~15, by default it’s 8. 1 3 5...
Page 147: Phone ->Call Feature
8.9. Phone ->Call Feature Mode Phone: To enable or disable feature key sync. Feature Key Sync: To enable or disable feature key sync. Mode: Select the desired mode. Forward Transfer To display and configure Forward setting. Note: There are three types of forward: Always Forward, Busy Forward and No answer Forward.
Page 148 DND (Do Not Disturb) allows IP phones to ignore any incoming calls. DND Emergency: Enable this function, users can still receive the call from DND Authorized number when in emergency situation. DND Authorized Number: 48G supports multiple authorized numbers. Please use comma to separate. DND Priority: Enable this function.
Page 149 DND Off Code: The Code is used to turn off DND on server’s side, if configured, IP phone will send a SIP message to server to turn off DND on server side if you press DND when DND is on. Call Waiting To enable or disable Call Waiting.
Page 150 Auto Redial Times: Determine how many times to redial. Intercom Intercom allows users to establish a call directly with the caller. Active: To enable or disable Intercom feature. Intercom Mute: If enabled, once the call established, the caller will be muted.
Page 151 Automatic Call Distribution is most used in call-center market, it allows IP phone to login the system with multiple status so that the system could distribute an incom call to available users or agents. ACD Activated Auto: If enabled, Agent status will turn to available automatically within a designated time (decided by ACD Activated Auto Timer).
Page 152 Note: For now, IP phone can only support IP address, IP address list and IP address pattern as allowed hosts Key As Send “Key As Send” allows you to disable send key or assign pound key as send key. SIP Config Setup the SIP protocol package interval.
Page 153 Door Phone When there is an incoming call from door phone, setup the delay auto answer time, FE-TEL-48G will auto answer the call after the timeout. Note: if you enable Auto Answer function, this feature will be not available Others Return Code When Refuse: Allows users to assign specific code as return code to SIP server when an incoming call is rejected.
Page 154: Phone->Audio
8.10. Phone->Audio Echo Canceller: Echo Canceller: To remove acoustic echo from a voice communication in order to improve the voice quality. Mic Volume: To adjust the handset mic volume. VAD (Voice Activity Detection): Allow IP phone to detect the presence or absence of human speech during a call.
Page 155 Automatically Generation Control: FE-TEL-48G will auto adjust amplification circuit gain via signal. Automatic Gain Control (Sending-side): Disabled by default Automatic Gain Control (Receiving-side): Disabled by default Automatic Gain Control Target: Range from 1 to 20 dB.
Page 156: Phone->Video
8.11. Phone->Video Media Feedback: NACK: Enabled it to filter mosaic. Tmmbr: Send the maximum temporary rate request. Disabled by default. H264 Settings: H264: A video stream compression standard. Different from H263, it provides an approximately identical level of video stream quality but a half bit rate.
Page 157 Hardware Endec Acceleration: This function is used to solve the image issue. Users can enable the Hardware Endec Acceleration when you need. Hardware Decodec Acceleration: Disabled by default. Color Enhancement: To increase the phone display color. Enabled by default. Image Quality: Users can select Low, Middle or High mode. Camera Priority: 48G can connect extra camera.
Page 158: Phone->Ext Key
8.12. Phone->Ext Key Current Page: 48G can support 4 pages Ext Key. 20 Ext Keys for each page. Key: Allows users to assign specific feature to the designated key on expansion module. For keys, the available feature list: DND, Menu, MSG, Status, Book, Fwd, PickUp, Group PickUp, Intercom, Speed Dial, History, Favorites, Redial, Account, ACD, BLF, Ballistically Return, Hot Desking, Record, XML Browser, DTMF.
Page 159: Phone-> Tone
8.13. Phone-> Tone Tone: Allows users to select a specialized tone sets (classified by countries) or to customize own tones. Note: Available country tones sets are: Spain, Luxembourg, Sweden, Taiwan, Belgium, Denmark, Finland, Germany, Netherlands, Norway, Portugal, China 1 4 8...
Page 160: Phone->Replace Rule
8.14. Phone->Replace Rule Rules: Allow users to select Replace rule or Dial-now to display or edit. Rules Modify: Allow users to modify selected rules information. Once you dial prefix value, it will call out Replace number. Click Add to add new replace rules. Select account for the replace rule Input a suitable prefix value.
Page 161: Phone->Dial Now
8.15. Phone->Dial Now Rules: Allow users to select Replace rule or Dial-now to display or edit. Dial Now Delay: Allow users configure dial now delay time for dial now. It means users can configure the IP phone to dial out the phone number automatically after the designated delay time if it matches any dial now rule.
Page 162: Phone->Action Url
country. If entered numbers match the predefined area code rule, the IP phone will automatically prefix outgoing number with area code. Note: There is only one area code rule supported. 8.16. Phone->Action URL To display and configure Action URL settings. Setup Completed: When the IP phone completes startup.
Page 163 Open DND: When the IP phone enables the DND mode. Close DND: When the IP phone disables the DND mode. Open Always Forward: When the IP phone enables the always forward. Close Always Forward: When the IP phone disables the always forward.
Page 164 UnHold: When the IP phone retrieves a hold call. Mute: When the IP phone mutes a call. UnMute: When the IP phone un-mutes a call. Missed Call: When the IP phone misses a call. IP Changed: When the IP address of the IP phone changes. FWD Incoming Call: When the IP phone forwards an incoming call.
Page 165: Phone->Multicast
8.17. Phone->Multicast Multicast Setting: To display and configure the Multicast setting. Paging Barge: Setup the priority quantity. Paging priority Active: Enable o disable the multicast. Priority List: To setup the multicast parameters. Listening Address: Enter the IP address you need to listen Label：Input the label for each listening address 1 5 4...
Page 166: Phonebook->Local Book
8.18. PhoneBook->Local Book Contact: To display and select local contact type. All Contacts: To display or edit all local contacts. Black List: To display black list contacts. Search: To search designated contacts from local phonebook. Dial: To dial out a call or hang-up an ongoing call from Web UI. Note: For this feature, you need to have the remote-control privilege to control IP phone via Web UI.
Page 167 Group: To display or edit Group contacts. Group Setting: To display or change Group name, related ringtone or description. Import/Export: To import or export the contact or blacklist file. 1 5 6...
Page 168: Phonebook->Remote Book
8.19. PhoneBook->Remote Book Remote Book: To display and configure Remote Book settings. Index: To select desired Remote Book item to display and configure. Local Book URL: To configure remote book server address. Local Book Name: To configure display remote book name on Phone Search Remote Phonebook Name: To enable or disable search remote phonebook name Search Flash Interval: To set interval (Range from 120s to 2592000s)
Page 169: Phonebook->Call Log
8.20. PhoneBook->Call Log Call History: To display call history records. Available call history types are All calls, Dialed calls, Received calls, Missed calls, and Forwarded calls. HangUp: To click to hang-up ongoing call on the IP phone. Note: For “HangUp” feature, you need to have the remote-control privilege to control IP phone via Web UI.
Page 170: Phonebook->Ldap
8.21. PhoneBook->LDAP To display and configure LDAP phonebook settings. Name Filter: The settings used to tell LDAP server what name attributes to search. Number Filter: The settings are used to tell LDAP server what number attributes to search. Server: To configure LDAP server’s address. Port: To configure LDAP server’s port.
Page 171: Phonebook->Broadsoft
Max Hits: To configure the maximum size of result response from LDAP server. Search Delay Time: To configure delay time before initiate LDAP searching request after you input a value from Phone UI. 8.22. PhoneBook->Broadsoft Broadsoft PhoneBook: To display and configure BroadSoft Phonebook settings.
Page 172: Upgrade->Basic
Note: IP phone supports at most 5 BroadSoft Phonebook items. For BroadSoft Phonebook’s server address, port, username and password, you need to consult your BroadSoft service provider for further information. Note: For setting details, please consult with your system administrator for further information.
Page 173: Upgrade->Advanced
Reset Config to Factory Setting: To setup the configuration file to factory setting. Reboot: Click the submit to reboot the device 8.24. Upgrade->Advanced PNP Option Plug and Play, once PNP is enabled, the phone will send SIP subscription message to PNP server automatically to get Auto Provisioning server’s address.
Page 174 Manual AutoP To display and configure manual update server’s settings. URL: Auto provisioning server address. User name: Configure if server needs an username to access, otherwise left blank. Password: Configure if server needs a password to access, otherwise left blank. Common AES Key: Used for IP phone to decipher common Auto Provisioning configuration file.
Page 175 This Auto Provisioning mode is actually self-explanatory. For example, mode “Power on” means IP phone will go to do Provisioning every time it powers on. Reboot Schedule: Enable to set the reboot at designed time. System Log To display syslog level and export syslog file. Syslog level: From level 0~7.The higher level means the more specific syslog is saved to a temporary file.
Page 176: Security->Basic
Note: IP phone will save captured packets file to a temporary file, this file maximum size is 1M(megabytes), and will top capturing once reaching this maximum size. Others: To display or configure others features from this page. Config file: To export or import configure file for IP phone. 8.25.
Page 177: Security->Advanced
Session Time Out Over the Time out value, users need to login again. 8.26. Security->Advanced Web Server Certificate: To display or delete Certificate which is used when IP phone is connected from any incoming HTTPs request. Note: The default certificate could not be deleted. Web Server Certificate Upload: To upload a certificate file which will be used as a server certificate.
Page 178 Client Certificate Upload: To upload certificate files, this is used as client certificate. Only Accept trusted Certificates: If this option is enabled, only trusted certificates will be accepted. 1 6 7...

Freund FE-TEL-48G Admin Manual

1 Product Overview

2 Installation

3 Daily Use

4 Basic Setting

5 Function

6 Software Upgrade

7 System Maintenance

8 Web Interface

Quick Links

Need help?

Questions and answers

Related Manuals for Freund FE-TEL-48G

Summary of Contents for Freund FE-TEL-48G

Table of Contents