Advertisement
Quick Links
TESOR PLUS CORP.
Touch-Screen Two Way Remote:TS1,TS4,TS5
One Way Remote :TX127
Two Way Transceiver:TR06CC,TR07CC,TR08CC,TR09CC,TR10CC
Remote function table:
Remote command
Arm
Disarm
Lock
Unlock
Silent Arm
Silent Disarm
Car finder
Anti-hijack
Panic
Two stage unlock
Shock bypass
Activate Channel 1
Activate Channel 2
Activate Channel 3
Activate Channel 4
Activate Channel 5
Activate Channel 6
Remote engine start
Remote engine shut
down
Arm with engine
running
TS5 SERIES - MFT USER MANUAL
Buttons
hold 2 sec
hold 2 sec / press times
hold 2 sec
hold 2 sec
hold 2 sec
Key
P1K1
P1K2
P1K1
P1K2
P0K1
P0K2
P1K1
P0K4
P0K4
P1K2
P1K1
P1K3
P1K1
P11K1
P11K2
P11K3
P11K4
P1K4
P1K4
P8K1
1
Conditions
Ignition on
Ignition on
Arm state
Ignition on
Ignition off
See function program
See function program
See function program
See function program
See function program
See function program
See function program
Engine run (by ignition
key)
Advertisement
Summary of Contents for TESOR PLUS CORP. TS5 MFT Series
- Page 1 TESOR PLUS CORP. TS5 SERIES - MFT USER MANUAL Touch-Screen Two Way Remote:TS1,TS4,TS5 One Way Remote :TX127 Two Way Transceiver:TR06CC,TR07CC,TR08CC,TR09CC,TR10CC Remote function table: Remote command Buttons Conditions P1K1 Disarm P1K2 Lock P1K1 Ignition on Unlock P1K2 Ignition on Silent Arm P0K1 Silent Disarm P0K2...
- Page 2 Outside view: MAIN PAGE: Press KEY to display Page 0: press anywhere in touch area to display PAGE ONE PAGE ONE:...
- Page 3 Press Forward or Backward button display other page Other PAGES: Button define is same as PAGE ONE,such as : P11K3 is CH5 button in p11 When transmitter received the car alarming will play trigger movies and sound voice: The move will be stopped,if the key pressed Cancel count down: set count down =00:00 Cancel alert time:...
- Page 4 Button in other page function table: Buttons Explain Buttons Explain P2K1 Set park time Set park P2K2 P7K2 Set car loge in p0 position Set count down P2K3 P7K3 Set English menu time P2K4 Clear trigger P7K4 Set Spain menu P3K1 Set alert time P8K1...
-
Page 5: Silent Disarm
1. Arm Press button once, system will chirp once, parking lights flash once, lock the doors, starter disabled, window close output 1 sec. (if CH4 programmed), status LED start to flash slowly, will chirp 4 times and parking lights flash 4 times if door or hood or trunk isn’t closed well while arming, and will not detect the door (hood, trunk) open until there are full closed well. - Page 6 When system is alarming or after disarming, if the LED quick flashes several times and then 1 second pauses, it indicates the system has been triggered, and the times the LED flashes indicate the zone that was triggered, as below: Twice: AUX 4 PIN 1 heavy trigger 3 times: AUX 4 PIN 2 heavy trigger 4 times: TRUNK...
- Page 7 button twice (see program feature C-2), will unlock the passenger’s doors (activate “2 stage Unlock Output”). If programmed. 13. Lock When system is disarmed and ignition key is on, press button will lock the doors. 14. Unlock When system is disarmed and ignition key is on, press button will unlock the driver’s door.
- Page 8 Press to activate channel 5, remote Output pulse time of channel 5 is programmable function (program feature D-1). 22. Channel 6 Press to activate channel 6, remote Output pulse time of channel 6 is programmable function (program feature D-2). 23. Panic In arm or disarm mode and ignition key is off.
- Page 9 Pin-code consists of two digits. To disarm system with out remote transmitter or deactivate Anti-hijack mode use PIN-code procedure. Pin-code consists of two digits: X, Y. Factory default 1:1 (X=1, Y=1) To disarming: - turn ignition ON - press override button (X) times - turn ignition OFF then ON - press override button (Y) times - turn ignition OFF...
- Page 10 If function on: - pull up hand brake while engine is running - turn ignition key off and take out the key (engine is still running) - engine will run for the programmed duration To stopping engine press button once. Parking flash once for confirm. 31.
- Page 11 If start is successful. parking lights flash 3 times Engine runs during “running time”. Then shut down automatically. To stopping engine press button once. Parking flash once for confirm. Engine auto start isn’t available in case of: - engine is running - hood is open - hand brake isn’t activated - Mid-gear procedure isn’t executed (for manual gear only)
- Page 12 35. Programming functions FEATURE “A” PROGRAMMING - turn off ignition - press override button 3 times - turn on ignition - parking lights flash and siren chirps 3 times - push the Valet Switch 1 times. - one long chirp with 1 short chirps is heard. You are now in the start feature “A”...
- Page 13 FEATURE “B” PROGRAMMING - turn off ignition - press override button 3 times - turn on ignition - parking lights flash and siren chirps 3 times - push the Valet Switch 3 times. - one long chirp with 3 short chirps is heard. You are now in the start feature “B”...
- Page 14 FEATURE “C” PROGRAMMING - turn off ignition - press override button 3 times - turn on ignition - parking lights flash and siren chirps 3 times - push the Valet Switch 5 times. - one long chirp with 5 short chirps is heard. You are now in the start feature “C”...
- Page 15 For Car HORN For window close for OEM for channel output output Each output 1s , REARM each output 30s When arming . when active. FEATURE “D” PROGRAMMING - turn off ignition - press override button 3 times - turn on ignition - parking lights flash and siren chirps 3 times - push the Valet Switch 7 times.
- Page 16 ENABLE DISABLE Remote start and Remote start and Engine Running Engine Running as long as "+" or as long as "+" or "-" Brake input "-" Brake input FEATURE “E” PROGRAMMING - turn off ignition - press override button 3 times - turn on ignition - parking lights flash and siren chirps 3 times - push the Valet Switch 9 times.
- Page 17 Each time remote Each time remote Each time remote Each time remote engine running engine running engine running engine running 5 minutes 10 minutes 15 minutes 20 minutes FEATURE “F” PROGRAMMING - turn off ignition - press override button 3 times - turn on ignition - parking lights flash and siren chirps 3 times - push the Valet Switch 11 times.
-
Page 18: Return To Factory Default Setting
RETURN TO FACTORY DEFAULT SETTING - turn off ignition - press override button 3 times - turn on ignition - parking lights flash and siren chirps 3 times - push the Valet Switch 13 times. - 3 long chirp is heard, You are now in the “Return to factory default setting”... - Page 19 To check whether the PIN code is right or wrong, can press P1K2, P9K2 to check, if the PIN code is correct then can go to the next step. Before PIN code setting, need to check and see top right side of screen will show ***PIN, after entered the correct PIN code, will show *** 1ST on the top right side, means in the first entering status, after setting, will show ***2ND, second entering status, if same as the first setting will display SAVE the PIN code and return to P4, if not the same will display ERROR and return to P4, if lose the PIN code can read out through the data wire from...
- Page 21 Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the TS5 MFT Series and is the answer not in the manual?
Questions and answers